System information

Voice Mail Administration

Issue 1 October 1997

A-3

1. Administer on your switch an extension number that is not associated with

a switch port. (These are often called phantom

or dummy numbers.) This

number is to be used to retrieve messages from a remote telephone.

2. Configure this number so that the Lucent I

NTUITY hunt group is in its

coverage path for all calls.

3. If your switch has a password capability, assign a password to the new

extension.

4. Assign the service ldg_ni_vmto the new extension.

a. Log in to the Lucent I

NTUITY system as sa or craft.

b. Begin at the Lucent I

NTUITY main menu (Figure 5-1) and select:

The cursor appears in the Called Number field.

c. Enter the called number that was administered on the switch for this

purpose.

d. Move the cursor to Service Name, press , then select

ldg_ni_vm.

e. Press (Save).

The system displays a command-output screen confirming your

choice.

f. Press three times to return to the main menu.

5. If you want the phantom extension to be available from outside your DID

number.

6. Give the Lodging message-retrieval number to subscribers to your system

to use for message retrieval from the Lodging application.

Voice Mail Administration

Voice mail is enabled any time the switch sends a guest’s call to coverage. The

following procedure, however, makes available a separate number that can be

used at any time to send voice mail to a guest.

> Assign Number Service

> Number Services

> Voice System Administration