System information

Issue 1 October 1997 A-1
A
Switch Administration for the Lucent
I
NTUITY Lodging System
Overview
At this point in the installation, you have completed the switch integration
procedures required to integrate the switch with the basic Lucent I
NTUITY system.
If the Lucent I
NTUITY system includes the optional lodging feature, you must now
perform additional switch administration as outlined in this chapter.
Purpose
The purpose of this chapter is to provide the procedures you need to administer
the switch to operate with the Lucent I
NTUITY Lodging option feature package.
Hunt Group Administration
A hunt group is a set of extension numbers assigned to another single number.
When a call goes to this number a programmed search of the hunt group is made
to deliver the call to a member of the set that is not busy. For example, when two
calls are made to the hunt-group extension, they are reconnected to two free
extensions from the set. Hunt groups are a commonly used switch feature. Your
switch probably has hunt groups already assigned.
You will need to configure a hunt group for calls to the Lucent I
NTUITY system.
Calls to the number serving the hunt group will then be redirected by the hunt
group to the several Lucent I
NTUITY system voice ports.
1. Administer your switch to create a hunt group for your Lucent I
NTUITY
system.