System information

Administer the Lucent INTUITY System for a DCS
Network Switch Integration
Issue 1 October 1997
5-5
4. Enter the number of the host switch in the Host Switch Number: field.
Valid host switch numbers range from 1 to 20.
5. Enter the logical channel number in the AUDIX Port Logical Channel
field. Logical channels range from 1 to 64.
The logical channel is the same number as the Interface Link and the
Local DCIU Port Number on the switch. See ‘‘Worksheet D: Assign the
Data Link’’ in Chapter 2, ‘‘Switch Integration Planning’’ to find the number.
6. Enter the switch port in the AUDIX Port Switch Port field. Valid switch
port numbers range from 1 to 64.
7. Press to update the system with the changes you entered.
The system displays the following message Update successful to
indicate that the switch link is resetting.
8. Press to exit the Switch Interface Administration screen and return
to the Lucent I
NTUITY System Main menu (Figure 5-1).
9. You have completed the Lucent I
NTUITY system administration required for
a DCIU switch integration. Continue with Chapter 6, ‘‘Acceptance Test
Administration’’.
SAVE
CANCEL