System information

Lucent INTUITY System Administration for Switch
Integration
5-2 Issue 1 October 1997
Administer the Lucent INTUITY System
for a Non-DCS Switch Integration
Use the instructions in this section to administer the Lucent INTUITY system for a
non-DCS switch integration. If you need to integrate your Lucent I
NTUITY system
with a DCS network, skip this section and continue with ‘‘Administer the Lucent
I
NTUITY System for a DCS Network Switch Integration’’.
!
CAUTION:
When you update the DCIU Interface Administration window, the Lucent
I
NTUITY system resets the DCIU switch link.
NOTE:
In Chapter 2, ‘‘Switch Integration Planning’’, you completed worksheets to
help you administer the system. See the worksheets in Chapter 2 as you
continue with the DCIU link administration process.
1. Access the I
NTUITY main menu (Figure 5-1).
Figure 5-1. INTUITY Administration Menu
NOTE:
If you need instructions for logging in to the system and accessing
the Lucent I
NTUITY System Main menu, see the document: I NTUITY
Messaging Solutions Administration
.
2. Select Switch Interface Administration.
3. Select Switch Selection.
4. Move the cursor to Switch:
Press (Choices). Then choose System 85/G2.
Select the country of choice, then press to exit this menu.
F2
F6