Instruction manual
HARDWARE AND SOFTWARE DETERMINATION
CALL CLASSIFIER (TN744)
Eight touch-tone receiver ports are provided on each TN744 Call Classifier circuit pack. The
TN744 circuit pack is used exclusively for receiving touch-tone input for the Call Prompting
feature, classifying outgoing calls for the Answer Detection feature, and classifying outgoing calls
for an outgoing call management system. Each of these are optional features that must be prop-
erly engineered. A maximum of 10 TN744 may be used in a G3i or G3r system (TN744 is not
supported in G1).
Enter the number of:
(A) Touch-tone receivers for Call Prompting .................................................................. ____
(B) Touch-tone receivers for Answer Detection .............................................................. ____
(C) Touch-tone receivers for outbound call management ............................................... ____
PEC
TOTAL PORTS ____ รท 8 = ____ 63532
81