Instruction manual

HARDWARE AND SOFTWARE DETERMINATION
ANALOG LINE (TN742)
If you are reusing a TN742 from an earlier system, enter the number of:
(A) 7100 Series Sets...................................................................................................... ____
(B) 2500/2554-Type Sets (On Premises)........................................................................ ____
(C) 2500/2554-Type Off-Premises Extensions................................................................ ____
(D) 2500-Type Sets with Message Waiting
Indicator/Recall capability......................................................................................... ____
(E) Rotary Dial Telephones (500-Type).......................................................................... ____
(F) 510As....................................................................................................................... ____
(G) Recorded Announcement Lines ............................................................................... ____
(H) Teleconferencing Lines
(QUORUM teleconferencing equipment or CPE) ................................................... ____
(I) Lines Equipped With Modems Only ........................................................................... ____
(J) External Pooled Modems .......................................................................................... ____
(K) Queue Warning Lamps (for UCD/DDC) .................................................................... ____
(L) Loudspeaker Paging Access Lines ........................................................................... ____
(M) Code Calling Access Lines ...................................................................................... ____
(N) Radio Paging Access Lines (Requiring Tip and Ring only)........................................ ____
(O) Recorded Telephone Dictation Lines
(Requiring Tip and Ring only)................................................................................... ____
(P) Analog Lines for other CPE ...................................................................................... ____
(Q) Line for TAAS External Alert .................................................................................... ____
(R) Future Growth.......................................................................................................... ____
PEC
TOTAL PORTS ____ ÷ 8 = ____ 63111
Additional information on analog line characteristics is in the following table.
79