Instruction manual

SYSTEM PARAMETERS
TABLE D (continued).
Station Allocation Characteristics
Required Records Required Records and
Station Type
(G1,G3) Button Units*
Basic Attendant Console A + 2B A
Enhanced Attendant Console A + 2B A
Attendant Selector Console A + 2B A
Feature Module [B] 240
Display B **
DTDM M M
MPDM/MTDM/7400A/7400B/7500B M M
Call Coverage Module B 200
EIA (PI-Simplex) M M
CDR M M
Netcon Data Channel 2M 2M
Processor Interface Link 2M 2M
[ISDN sets for G3 only]
ISDN-BRI UDM - 7500 M + I
ISDN-BRI set - 7505 S + I + 190
ISDN-BRI set - 7506 w/display S + I + 250
ISDN-BRI set - 7507 w/display S + I + 480
ISDN-BRI set - 8503T S + I + 50
LEGEND:
Notation Meaning G1 G3
A Attendant record 7 7
S Basic station record 1600 1600
B Large button module 1000 2000
M Data module record 800 800
I ISDN-BRI endpoint record N/A N/A
# Button memory units N/A 547200
*
— Assumes 3 call appearances per station in button 1-3 with all other available buttons assigned.
— For call appearances other than 3, adjust total units by the following:
adjustment=(Nca-3)*[(10*Ndisp)+(6*Nbri)]
where: Nca=number of call appearance (assumes first Nca button is CA)
Ndisp=total number of display stations in system
Nbri=total number of BRI station in system
** For G3, the number of button memory units required for a display depends on the station type. The number of button
memory units required for a display is indicated for each station type in the table above. Note that these values
depend on the assumptions in the previous footnote. (Call appearances are only translated on buttons 1-3.)
42