Instruction manual

SYSTEM PARAMETERS
The following table shows the button module requirements of different station configurations.
TABLE D. Station Allocation Characteristics
Required Records Required Records and
Station Type
(G1,G3) Button Units*
Analog set 500 S S+62
Analog set 2500 S S+62
Analog set 7101A S S+62
Analog set 8102 S S+62
Analog set 8110 S S+62
10MET set - 10 buttons S S+52
20MET set - 20 buttons S + [B] S+152
30MET set - 30 buttons S + [B] S+252
Hybrid set - 7303S S S+102
Hybrid set - 7305S S + [B] S+342
Hybrid set - 7309S S S+102
Digital set - 7401D S S+92
Digital set - 7401 Plus S S+92
Digital set - 7403D S S+102
Digital set - 7404D S + M S+62
Digital set - 7404D w/display S + B + M S+192
Digital set - 7405D S + [B] S+342
Digital set - 7405D w/display S + B + [B] S+472
Digital set - 7406D S + [B] S+282
Digital set - 7406D w/display S + B + [B] S+342
Digital set - 7406 Plus S + [B] S+282
Digital set - 7407D (w/display) S + B + [B] S+472
Digital set - 7407 Plus S + B + [B] S+472
Digital set - 7410D S S+102
Digital set - 7434D S + [B] S+342
Digital set - 7434D w/call coverage module S + B + [B] S+542
Digital set - 7434D w/display S + 2B + [B] S+472
602A1 S + B + [B] S+342
PC S + B + [B] S+472
510BCT S + B + [B] + M S+322
515BCT S + B + M S+232
*
— Assumes 3 call appearances per station in button 1-3 with all other available buttons assigned.
— For call appearances other than 3, adjust total units by the following:
adjustment=(Nca-3)*[(10*Ndisp)+(6*Nbri)]
where: Nca=number of call appearance (assumes first Nca button is CA)
Ndisp=total number of display stations in system
Nbri=total number of BRI station in system
41