Instruction manual

FEATURE DETERMINATION

TABLE B

(continued).

Features Requiring Additional Hardware and/or Software

Hardware and/or Actual

Feature Software Hardware and/or

Required Software Needed

Recorded Telephone Dic-

tation Access

Telephone dictation machines and, depend -

ing on the type of machine, one port on a

TN746 Analog Line circuit pack or one port

on a TN763 Auxiliary Trunk circuit pack for

each machine assigned.

Remote Access Dedicated trunks, if Remote Access is not

available via DID.

Report Scheduler and

System Printer

G3r requires a system port comprising a

TN553 Packet Data circuit pack connected

to a TN726 Data Line circuit pack. For G1,

G3i, and G3r, other hardware requirements

depend on the type of interface used for the

system printer (dedicated for the Report

Scheduler feature). The printer may be an

AT&T 470- or 570-series printer, which uses

a serial interface, or a compatible printer. A

Personal Computer (PC) may be connected

to the system printer port for collection of

data; however, a serial interface on the PC

must be provided for the connection. The

system printer can be connected as follows:

Using the Data Communications Equip -

ment (DCE) jack on the back of the

Control Cabinet which provides a stan -

dard EAI-232C interface. This eliminates

the need for a data module. An appropri-

ate 50-foot cable is required.

Using a TN754 Digital Line port and a

data module.

Using a TN726 Data Line port and an

ADU.

Requires multi-appearance voice terminals.Ringer Cutoff