Instruction manual

FEATURE DETERMINATION

TABLE B

(continued).

Features Requiring Additional Hardware and/or Software

Hardware and/or Actual

Feature Software Hardware and/or

Required Software Needed

Intercept Treatment Announcement equipment and one port on

a TN746 Analog Line circuit pack per analog

announcement. A TN750 Announcement

circuit pack can provide up to 64 different

announcements, which can be recorded

directly onto the TN750 circuit pack.

Inter-PBX Attendant Calls A tie trunk group between the branch and

main locations. CAS software (Main or

Branch) is required.

Intraflow and Interflow ACD software.

Lookahead Interflow Requires an ISDN-PRI interface (see ISDN-

PRI feature for hardware requirements).

Requires Lookahead Interflow software,

Private Networking Automatic Alternate

Routing (PNA) software, and Call Vectoring

software.*

Loudspeaker Paging

Access

Loudspeaker paging equipment and one

port on a TN763 Auxiliary Trunk circuit pack

per zone. Paging interface equipment, con -

sisting of a 278A Adapter (only if equipment

is not FCC-registered) and a 24-volt power

supply, per zone. (This hardware can be

shared with the Code Calling Access

feature.)

If PagePac paging system equipment is

used, one port on a TN747 CO Trunk circuit

pack, TN746 Analog Line circuit pack,

TN763 Auxiliary Trunk circuit pack (depend -

ing on the PagePac arrangement used).

Loudspeaker Paging

Access-Deluxe

See Loudspeaker Paging Access.

M-to-N Digit Conversion

(G3)

Either ARS and Private Networking software

or ARS and UDP software.

* Software is activated by enabling this feature on the System Parameters Customer Options form.