Instruction manual

FEATURE DETERMINATION
TABLE B (continued).
Features Requiring Additional Hardware and/or Software
Hardware and/or Actual
Feature Software Hardware and/or
Required Software Needed
Each Call Prompting announcement
requires a port on a TN750 Announcement
circuit pack or an external announcement
facility (analog announcements). Note that
each announcement requires a port on a
TN746 Analog Line circuit pack. The TN744
Call Classifier circuit pack is required to
provide touch-tone receivers for use by the
feature. Up to ten TN744s may be
assigned. Each TN744 provides eight
touch-tone receivers and requires Call
Vectoring Basic and Call Prompting
software.
Call Prompting
Call Vectoring If music source is required (recommended),
refer to the Music-On-Hold feature for
hardware requirements.
Requires Vectoring—Basic. Vectoring—
Prompting software is optional.*
Call Party Number/Billing
Number
Interface via the CallVisor ISDN Gateway
Adjunct—refer to the Station
Identification/Automatic Number Identifica -
tion requirement for hardware requirements.
Requires ISDN-PRI software and CallVisor
ISDN Gateway software.*
Centralized Attendant
Service (CAS)
(Branch or Main)
For G1 or G3i, TN760 Tie Trunk or TN767
DS1 Interface circuit pack. For G3r or Inter -
national DEFINITY, use TN464 Universal
DS1 circuit pack instead of TN760 or
TN767. The TN760 will also serve all other
tie trunk applications. As an alternative, the
TN722 DS1 Tie Trunk circuit pack can be
used for the release link trunks of the CAS
network. CAS Main or Branch software is
required.
* Software is activated by enabling this feature on the System Parameters Customer Options form.
17