Instruction manual

FEATURE DETERMINATION

TABLE B

(continued).

Features Requiring Additional Hardware and/or Software

Hardware and/or Actual

Feature Software Hardware and/or

Required Software Needed

Call Detail Recording

(CDR)

(continued)

A printer, personal computer, tape unit, or

the TELESEER CDR unit (Data Terminal

Equipment)—a Modular Processor Data

Module (MPDM) to a port on a TN754

Digital Line circuit pack or a 212A-type

modem to a port on a TN746 Analog Line

circuit pack. In the latter case, a standard

pooled modem is required for the data path.

94A Local Storage Unit (LSU) (Digital

Communications Equipment) (G1 Only) —a

MTDM to a port on a TN754 Digital Line

circuit pack or a 212A-type modem to a port

on a TN746 Analog Line circuit pack. In the

latter case, a pooled modem is also

required.

Host computer—A private line terminated at

the DEFINITY Generic 1 with a Trunk Data

Module. Also, a private line modem if off-

premises (out-of-building).

A TN726 Data Line circuit pack can be used

in conjunction with an Asynchronous Data

Unit (ADU) to connect a 94A LSU,

TELESEER CDR unit, or printer.

Older equipment may not support enhance -

ments to World Class Routing (International

DEFINITY). Use Call Accounting System

Plus for full functionality in such cases.

* Software is activated by enabling this feature on the System Parameters Customer Options form.