Instruction manual

FEATURE DETERMINATION
TABLE B (continued).
Features Requiring Additional Hardware and/or Software
Hardware and/or Actual
Feature Software Hardware and/or
Required Software Needed
Administered
Connection/Access
Endpoint
Trunk Circuits: For G1 or G3i, TN767 DS1
Interface, TN760 Tie Trunk, or, for G3r and
G1.2SE, TN464 Universal DS1 circuit pack.
Other circuit packs: TN726 Data Line, or
TN754 Digital Line, TN556 ISDN-BRI Line,
TN758 Pooled Modem.
Data Modules: MPDM, MTDM, 7400D
series voice terminal with DTDM, 7400B,
7500B.
Agent Call Handling ACD software.
Attendant Direct Extension
Selection With Busy Lamp
Field
A selector console.
Audio Information
Exchange (AUDIX)
Interface
Distributed Communications System (DCS)
software if AUDIX is desired in a DCS
arrangement.* An AUDIX machine and an
appropriate number of ports on a TN746
Analog circuit pack. AUDIX data link
hardware is required as follows:
Systems connected to AUDIX-L PI jack on
the TN765 Processor Interface circuit pack
and an MPDM. If the PI jack is in use for
another adjunct, one port on a TN754 Digital
Line, an MTDM, and an MPDM are required
for G1 or G3i. G3r requires the TN577
Packet Gateway and an isolating data
interface (IDI).
System connected to AUDIX-S or AUDIX-
M PI jack on the TN765 Processor Interface
circuit pack. If the PI jack is in use for
another adjunct, one port on a TN754 Digital
Line circuit pack and an MPDM are required
for G1 and G3i. G3r requires the TN577
Packet Gateway and an isolating data
interface (IDI).
* Software is activated by enabling this feature on the System Parameters Customer Options form.
13