Instruction manual

FEATURE DETERMINATION
Features That Require Additional Hardware and/or Software
Table B lists the features that require additional hardware and/or software. Please note that addi-
tional hardware and/or software is not required in all cases. For example, if the special ‘‘wait’’
character is used extensively with the Abbreviated Dialing feature, additional tone detectors may
be needed, but if the ‘‘wait’’ character is not used, additional detectors may not be required. (The
‘‘wait’’ character ties up the detector through the ‘‘wait’’ period.)
If you are planning to use a feature that requires additional hardware or software, list the
hardware and/or software in Table B.
Unless otherwise noted, the features listed in Table B are available in all versions of the system.
TABLE B. Features Requiring Additional Hardware and/or Software
Hardware and/or Actual
Feature Software Hardware and/or
Required Software Needed
Abandoned Call Search TN747 CO Trunk circuit pack.
Additional TN748 tone detectors are
required if the special ‘‘wait’’ character is
used frequently. Systems can have optional
software to provide an enhanced Abbrevi -
ated Dialing list with an additional 1000
entries.
Abbreviated Dialing
CallVisor Adjunct Switch
Application Interface
(ASAI)
Requires a port on a TN556 ISDN-BRI cir -
cuit pack (12 ports) and a terminating resis -
tor for each interface to be provided. Up to
eight interfaces are supported. A TN778
Packet Control circuit pack is required for
CallVisor ASAI applications. A TN771
Maintenance circuit pack is required in each
port network of a duplicated CallVisor ASAI
configuration.
Requires CallVisor ASAI software.*
* Software is activated by enabling this feature on the System Parameters Customer Options form.
12