Instruction manual

ENVIRONMENTAL REQUIREMENTS
Desktop Space
The 510A or 510D Personal Terminal and 513, 515, 610, 615, 715, 4410, and 4425 terminals can
be located in the equipment room and require space on a desk or table.
The 513, 515, 610, 615, 715, 4410, and 4425 terminals each require approximately 3.2 square
feet of space. The 510A or 510D with optional keyboard each requires approximately 2.1 square
feet of space.
Optional Equipment Floor and Desktop Space
Refer to the following documents for additional information on optional equipment that can be
used with the system and that will require floor or desk space.
445 Printer 999-700-023
443 Printer 999-700-024
450 Printer 999-700-025
460 Printer 999-700-022
470 Printer and
475 Printer 999-300-285IS
572 Printer and
573 Printer 999-300-562
Wall Space Required
Wall space required in the equipment room depends on the type of cross-connect equipment
being installed—Z100-type (modular) or 110-type. The space required also depends on the size
of the system. DEFINITY  Communications System Generic 1 and Generic 3i—Wiring, 555-
204-111, provides details on the cross-connect hardware.
If existing cross-connect hardware is reused, the space requirements and hardware requirements
must be detailed in the system floor plan. Contact the Technical Consultant for assistance in
planning for reuse of existing equipment.
110