Instruction manual

HARDWARE AND SOFTWARE DETERMINATION
Multi-Carrier Cabinet Configuration
A multi-carrier cabinet configuration can be selected from the following equipment arrangements.
The G3r data is given in the following table separately from the G1 and G3i data.
The G3r data has special considerations and limitations:
The PPN cabinet is the first cabinet and is available only in the multi-carrier cabinet.
The PPN cabinet supports only one port network.
The PPN cabinet is configured with three different carriers:
— Processor Carrier - Minimum of one, maximum of two
— Switch Node Carrier - One or two, depending on connectivity duplication
— Port Carrier - Minimum of one, maximum of four
The Switch Node Carrier can only be configured in a multi-carrier cabinet.
The EPN is available in both the single- and multi-carrier cabinet.
Max Attribute Attribute
Carriers Port Slots* PEC for AC for DC
PPN Without Duplication
Control A + Port B 29 (28) 6300-05A PRC02 PRC04
Control A + Ports B, C 49 (48) 6300-05B PRC02 PRC04
Control A + Ports B, C, D 69 (68) 6300-05C PRC02 PRC04
Control A + Ports B, C, D, E 89 (88) 6300-05D PRC02 PRC04
G3r Control A + Ports B, C, D, E
(No CSS) 80 6300-07D PRC02 PRC04
G3r Control A + Ports B, C, D
(E - With CSS) 60 6300-07C PRC02 PRC04
63310
EPN Without Duplication (adds to PPN)
Expansion Control A 18 63501
Exp. Control A + Port B 38 63502 PRC02 PRC04
Exp. Control A + Ports B, C 58 63503 PRC02 PRC04
Exp. Control A + Ports B, C, D 78 63504 PRC02 PRC04
Exp. Control A + Ports B, C, D, E 98 63505 PRC02 PRC04
G3r Control A + Ports B, C, D, E
(No CSS) 98 63505 PRC02 PRC04
G3r Control A + Ports B, C, D, E
(With Simplex Switch Node Carriers) 78 63505 PRC02 PRC04
G3r Control A + Ports B, C, D, E
(With Duplicate Switch Node Carriers) 58 63505 PRC02 PRC04
* Figures in ( ) are maximum PPN slots when the system has EPN.
97