User`s manual

Data Options and Profiles
NOTE:
For further information about the new industry standard V.120 rate
adaption protocol, you can obtain ANSI Standard T1.612 from
Global Engineering Documents.
For inquiries within the USA
Global Engineering Documents
1990 M Street NW, Suite 400
Washington, DC 20036
1 800 854-7179 Voice
1 202 331-0960 FAX
For inquiries outside the USA
Global Engineering Documents
2805 McGaw Avenue
Irvine, CA 92714
1 714 261-1455
Parity
Option Values: odd, even, mark, space
Applicable Data Protocols: All
The ADM ignores parity received from your terminal in Local Mode. If a terminal
connected to the ADM requires parity to display Local Mode text, match the
parity of the ADM with your terminal.
NOTE:
The Parity setting of the ADM only affects local mode. The ADM never
adjusts parity of data transmitted to the network in data mode. The ADM
only adjusts the parity of X.25 data transmitted from the network if it is
specifically requested to do so via an X.29 message from a remote
X.25 host.
4-14