User`s manual

Data Options and Profiles
Edit
Option Values: on, off
Applicable Data Protocols: X.25, Mode 3, BV64I, and BV56I
This option is used with the Forwarding option and allows you to correct
characters and lines of text before transmitting data packets to the far end.
If you type more than a full packet of data, then a packet is sent out
automatically.
Select on if you want to be able to edit packets before you send them; select off
otherwise. Note that Forwarding must be set on for Edit to work.
The characters you can use for editing are selected with the Char.erase and
Line.erase options. These characters are acted on locally and are not sent out in
packets.
Interactions with Char.erase and Line.erase: At least one of these options
must be set to a value other than off for editing to work.
Flow Control Parameter Negotiation (FCPN)
Option Values: off, on
Applicable Data Protocols: X.25
A Flow Control Parameter Negotiation (FCPN) selection of off is used to enable
the default values of the window size and the maximum packet size
(2 and 128, respectively) by directing the ADM not to request the X.25 FCPN
facility.
4-7