User`s manual

Getting Started
Messages on the 8500 Series Display
Terminal, the Attached Data
Terminal, or the PC
This section describes various messages that may appear on your 8500 series
display terminal, your attached data terminal, or your PC.
CONTINUE may appear when dialing a call or a particular feature access
code. At this point, additional digits may be required to
complete the call. For further information, call your system
administrator.
DENIED, DTR
IS OFF
is displayed if you try to initiate a data call via
DATA
while the
DTR indication is off. See the DTR section in
Chapter 4, ‘‘Data Options and Profiles,’’ for more information.
DIAL is displayed when call origination is performed via
DATA
.
LINK DOWN is displayed when you try to initiate a data call when a
signaling link cannot be established to the network. For more
information, see your system administrator.
INCOMING
DATA CALL
is displayed if you have an incoming call. In CMD Local Mode,
this message and possibly additional information about the
incoming call will be displayed prior to a CONNECT message.
For example, an incoming internal automatically answered
circuit switched data call from telephone number
908-555-2222 on July 18 at 3:41 pm may appear as follows
on the display of your data terminal.
INCOMING DATA CALL
908-555-2222
InI
07-18 3:41 pm
CONNECT
DATA MODE
2-30