User`s manual

Getting Started
4. If you have an 8510 or 8528 display terminal, press
Next to access the
second data options screen.
The following is displayed:
< DATA OPTIONS
Reset Indicator Done
5. Press the softkey associated with Indicator.
The following is displayed on the 8510 and 8528 display terminal screen:
SHOW DATA INDICATOR?
Yes No Explain
The following is displayed on the 8520 display terminal screen:
SHOW AN INDICATOR
WHILE A DATA CALL
IS CONNECTED?
Yes No
6. Do one of the following:
To show an indicator on the screen while a data call is connected,
press the softkey associated with Yes. A confirmation screen is
displayed.
If you do not want to show a data call indicator, press the softkey
associated with No. A confirmation screen is displayed on the 8520
display terminal screen.
2-20