User`s manual

Getting Started
Viewing the Current Data Options
When viewing the options, the currently active values are displayed.
NOTE:
These active values may be different from the values initially displayed on
the change options screens. Refer to the section ‘‘Changing the Data
Options’’ earlier in this chapter.
To view the currently active settings using the softkeys on your 8500 series
display terminal, do the following:
1. If you have an 8510 or 8528 display terminal, press
Menu to access the
main softkey menu screen, and then press
Next to access the second
menu screen.
If you have an 8520 display terminal, press
Menu to access the main
softkey menu screen.
2. Press the softkey associated with Data.
3. Press the softkey associated with DataOptions or Data Options.
The following is displayed on the 8510 and 8528 display terminal screen:
DATA OPTIONS >
Change ViewCurrent Done
The following is displayed on the 8520 display terminal screen:
DATA OPTIONS
Indicator
Change Options Reset
View Current Done
2-16