User`s manual

Getting Started
The following is displayed on the 8510 and 8528 display terminal screen:
SET LOCAL MODE: CMD
- + Skip Save
The following is displayed on the 8520 display terminal screen:
SET LOCAL MODE: CMD
Quit
Local(-) Skip
Local(+) Save
11. Press the softkey associated with - or + to change the currently displayed
option value until the desired value is displayed.
12. Do one of the following:
Press the softkey associated with Save to save the displayed value
and set the next data option. A message informing you of the new
local mode setting is displayed for a few seconds.
Press the softkey associated with Skip to set the next data option
without saving the local mode. You are returned to the DATA
OPTIONS menu.
If you have an 8520 display terminal, press the softkey associated
with Quit to return you to the DATA OPTIONS menu without
saving the local mode.
After you have made each selection, the ISDN set stores and activates
your selections.
2-15