Manualshelf

User`s manual

ManualsBrandsAT&T ManualsComputer equipmentDefinity 8510T
31323334353637383940
Getting Started
The following is displayed on the 8510 and 8528 display terminal screen:
SET PARITY: Even
- + Skip Save
The following is displayed on the 8520 display terminal screen:
SET PARITY: EVEN
Quit
Parity(-) Skip
Parity(+) Save
9. Press the softkey associated with - or + to change the currently displayed
option value until the desired value is displayed.
10. Do one of the following:
Press the softkey associated with Save to save the displayed value
and set the next data option. A message informing you of the new
parity setting is displayed for a few seconds. The next screen
prompts you to change the local mode.
Press the softkey associated with Skip to set the next data option
without
saving the parity. The next screen prompts you to change
the local mode.
If you have an 8520 display terminal, press the softkey associated
with Quit to return you to the DATA OPTIONS menu
without
saving the parity.
2-14