User`s manual

Getting Started
The following is displayed on the 8510 and 8528 display terminal screen:
SET DATA RATE: 9600
- + Skip Save
The following is displayed on the 8520 display terminal screen:
SET DATA RATE: 9600
Quit
Rate(-) Skip
Rate(+) Save
7. Press the softkey associated with - or + to change the currently displayed
option value until the desired value is displayed.
8. Do one of the following:
Press the softkey associated with Save to save the displayed value
and set the next data option. A message informing you of the new
data rate setting is displayed for a few seconds. The next screen
prompts you to change the parity.
Press the softkey associated with Skip to set the next data option
without saving the data rate. The next screen prompts you to
change the parity.
If you have an 8520 display terminal, press the softkey associated
with Quit to return you to the DATA OPTIONS menu without
saving the data rate.
2-13