User`s manual

Getting Started
4. Press the softkey associated with Change or Change Options to
change the data options.
The following is displayed on the 8510 and 8528 display terminal screen:
SET DATA MODE: DX25
- + Skip Save
The following is displayed on the 8520 display terminal screen:
SET DATA MODE: DX25
Quit
Mode(-) Skip
Mode(+) Save
5. To change the displayed setting, press the softkey associated with
- or + until the desired value is displayed.
6. Do one of the following:
Press the softkey associated with Save to save the displayed value
and set the next data option. A message informing you of the new
data mode setting is displayed for a few seconds. The next screen
prompts you to change the data rate.
Press the softkey associated with Skip to set the next data option
without saving the data mode. The next screen prompts you to
change the data rate.
If you have an 8520 display terminal, press the softkey associated
with Quit to return you to the DATA OPTIONS menu without
saving the data mode.
2-12