User`s manual
Table Of Contents
- Contents
- Introduction
- Your ISDN 8510T Voice Terminal
- Feature Descriptions
- Voice Features
- Features Accessed with the Display and Softkeys
- ENTERING AND EXITING SOFTKEY MODE (USING THE MENU AND THE EXIT BUTTONS)
- THE VOICE TERMINAL SELF-TEST FEATURE bbbbbbb
- USING THE NEXT, THE PREV, AND THE DIR BUTTONS
- RESPONDING TO ´QUIT´ AND ´DONE´
- A SOFTKEY DISPLAY SCREEN FLOWCHART
- SETTING THE CLOCK
- SETTING THE SPEAKERPHONE
- ADDING, EDITING, AND DELETING A NUMBER AND NAME IN THE DIRECTORY
- VIEWING A DIRECTORY ENTRY (AND PLACING A CALL)
- USING THE DIR BUTTON TO PLACE A CALL
- USING THE CALL LOG
- LOCKING AND UNLOCKING THE DIRECTORY, CALL LOG, AND ALL SOFTKEYS
- CHANGING OR REMOVING YOUR PASSWORD
- SELF-TEST
- CHOOSING THE CONTRAST LEVEL FOR THE DISPLAY
- SELECTING A PERSONALIZED RING
- SETTING THE RATE AT WHICH YOU VIEW THE DISPLAY MESSAGES
- TURNING ON OR OFF SOFTKEY INFORMATION TONES
- SETTING THE NUMBER OF NAMES ON THE DIRECTORY PAGE
- Tones and Their Meanings
- Labeling and Installing the Designation Card and the Telephone Number Card
- Installation
- Technical Description
- Index
SETTING THE RATE AT WHICH YOU VIEW THE DISPLAY
MESSAGES
You can use the softkeys to set the length of time the display message
stays on the screen. When you receive your voice terminal, the rate is
set at Medium. However, there are actually 3 rate settings: Slow,
Medium, and Fast. You may want to test all 3 reading rates before you
make a final selection.
To select the rate at which you see the display messages
1 Press
Menu
.
2 Press the softkey below Option.
3 Press
Next >
to view the second Option screen.
The display shows:
< OPTIONS >
Cntrast Ring Screen Done
4 Press the softkey below Screen.
The display shows the current rate:
TIMED MESSAGE RATE: MED
Slow Med Fast Done
5 Press the softkey below either Slow, Medium, or Fast, according to
the rate at which you want the display messages to be shown.
The display reflects the choice you have made.
6 When the display screen shows the display message rate you want,
press the softkey below Done.
60