User`s manual
Table Of Contents
- Contents
- Introduction
- Your ISDN 8510T Voice Terminal
- Feature Descriptions
- Voice Features
- Features Accessed with the Display and Softkeys
- ENTERING AND EXITING SOFTKEY MODE (USING THE MENU AND THE EXIT BUTTONS)
- THE VOICE TERMINAL SELF-TEST FEATURE bbbbbbb
- USING THE NEXT, THE PREV, AND THE DIR BUTTONS
- RESPONDING TO ´QUIT´ AND ´DONE´
- A SOFTKEY DISPLAY SCREEN FLOWCHART
- SETTING THE CLOCK
- SETTING THE SPEAKERPHONE
- ADDING, EDITING, AND DELETING A NUMBER AND NAME IN THE DIRECTORY
- VIEWING A DIRECTORY ENTRY (AND PLACING A CALL)
- USING THE DIR BUTTON TO PLACE A CALL
- USING THE CALL LOG
- LOCKING AND UNLOCKING THE DIRECTORY, CALL LOG, AND ALL SOFTKEYS
- CHANGING OR REMOVING YOUR PASSWORD
- SELF-TEST
- CHOOSING THE CONTRAST LEVEL FOR THE DISPLAY
- SELECTING A PERSONALIZED RING
- SETTING THE RATE AT WHICH YOU VIEW THE DISPLAY MESSAGES
- TURNING ON OR OFF SOFTKEY INFORMATION TONES
- SETTING THE NUMBER OF NAMES ON THE DIRECTORY PAGE
- Tones and Their Meanings
- Labeling and Installing the Designation Card and the Telephone Number Card
- Installation
- Technical Description
- Index
— Message light goes on.
— The display shows you the Feature Package number and the
Self-Test passed message.
NOTE: If these events do not occur, contact your System
Manager.
5 After you hear repeated tone, press any button on the voice terminal.
Terminal emits a key click.
6 Press
Mute
,
Speaker
,
Conf
, and
Transfer
.
Lights to the left of the Mute, Speaker, Conf, and Transfer
buttons go on steadily.
7 Press
Redial
,
Exit
,
Drop
, and
Hold
.
Lights to the left of the Mute, Speaker, Conf, and Transfer
buttons flutter.
8 Pick up handset and press each dial pad key.
Message light flutters.
Handset emits a touch tone as each key is pressed.
9 Hang up handset.
10 When the self-test is completed, press
Exit
twice.
NOTE: If you do
not
press
Exit
twice to end the test, the voice
terminal automatically exits the self-test after 30 seconds.
55