User`s manual
Table Of Contents
- Contents
- Introduction
- Your ISDN 8510T Voice Terminal
- Feature Descriptions
- Voice Features
- Features Accessed with the Display and Softkeys
- ENTERING AND EXITING SOFTKEY MODE (USING THE MENU AND THE EXIT BUTTONS)
- THE VOICE TERMINAL SELF-TEST FEATURE bbbbbbb
- USING THE NEXT, THE PREV, AND THE DIR BUTTONS
- RESPONDING TO ´QUIT´ AND ´DONE´
- A SOFTKEY DISPLAY SCREEN FLOWCHART
- SETTING THE CLOCK
- SETTING THE SPEAKERPHONE
- ADDING, EDITING, AND DELETING A NUMBER AND NAME IN THE DIRECTORY
- VIEWING A DIRECTORY ENTRY (AND PLACING A CALL)
- USING THE DIR BUTTON TO PLACE A CALL
- USING THE CALL LOG
- LOCKING AND UNLOCKING THE DIRECTORY, CALL LOG, AND ALL SOFTKEYS
- CHANGING OR REMOVING YOUR PASSWORD
- SELF-TEST
- CHOOSING THE CONTRAST LEVEL FOR THE DISPLAY
- SELECTING A PERSONALIZED RING
- SETTING THE RATE AT WHICH YOU VIEW THE DISPLAY MESSAGES
- TURNING ON OR OFF SOFTKEY INFORMATION TONES
- SETTING THE NUMBER OF NAMES ON THE DIRECTORY PAGE
- Tones and Their Meanings
- Labeling and Installing the Designation Card and the Telephone Number Card
- Installation
- Technical Description
- Index
The display shows:
UNANSWERED CALL LOG
New Old Done
NOTE: The words, "New" or "Old" appear on the second line only
if you have new or old calls in your voice terminal’s Call Log.
3 Press the softkey below New or below Old according to the
unanswered calls you want to view at this time.
The display shows:
555-1235 K.Smith >
Time Delete More
NOTE: If the number and the name of the caller cannot be
identified, you will see the message, "Phone#/Name Unavailable"
on your display screen. (The name is present only if it’s an
internal call.)
4 If you want to see the time at which this call rang at your voice
terminal, press the softkey below Time.
5 If you want to remove this call from your Unanswered Call Log, press
the softkey below Delete.
6 If you want to see information on the next or previous call in the Call
Log, press the softkey below More or press
Next >
or
< Prev
.
The display shows you the number and name of the next or
previous unanswered call in the Call Log.
The display tells you when you have finished viewing all the new
unanswered calls in the Call Log.
7 When you are finished viewing each unanswered call in the Call Log,
press the softkey below More until you reach the end of that list.
Then press the softkey below Done.
NOTE: After you have viewed new calls in the Call Log, they become old
calls. The Call Log will continue to hold the 10 most recent unanswered
calls.
38