User`s manual

6 Use the dial pad keys to enter the name of the person whose number
you have just added to the Directory. Pressing the softkey below
Quit now will abandon the procedure. The number you entered will
not be saved.
IMPORTANT: You may need to press the dial pad key more than
once to enter the correct character. For example, press the GHI (or
4) key once to enter a "G"; press the 4 key twice to enter an "H";
press the key a third time to enter an "I." If you press the dial pad
key a fourth time, a "4" appears on the screen. If you press the key
again, the screen will again print a "G."
You can also use a # or a * at the beginning of or within the name.
Once the letter on the screen is correct, you must press
Next > to
enter the next letter.
After you have entered at least one character, the following
display appears:
ENTER 5-CHAR NAME:A
Case DeleteChar Done
NOTE: As you enter each letter of the name, that letter flashes on
the screen until you move on to the next letter.
When a letter is flashing, use Case to switch between UPPER
CASE and lower case letters. Of course, you may have a
combination of both in your 5-character name (such as Sandy or
HarvW).
When a letter is flashing, use DeleteChar to erase that letter.
Use
Next to advance to the next letter.
ENTER 5-CHAR NAME:A_
Backspace Done
When Backspace appears on the second line of the display, you
can use this feature to go back 1 space and erase the previous
letter.
29