User`s manual
Table Of Contents
- Contents
- Introduction
- Your ISDN 8510T Voice Terminal
- Feature Descriptions
- Voice Features
- Features Accessed with the Display and Softkeys
- ENTERING AND EXITING SOFTKEY MODE (USING THE MENU AND THE EXIT BUTTONS)
- THE VOICE TERMINAL SELF-TEST FEATURE bbbbbbb
- USING THE NEXT, THE PREV, AND THE DIR BUTTONS
- RESPONDING TO ´QUIT´ AND ´DONE´
- A SOFTKEY DISPLAY SCREEN FLOWCHART
- SETTING THE CLOCK
- SETTING THE SPEAKERPHONE
- ADDING, EDITING, AND DELETING A NUMBER AND NAME IN THE DIRECTORY
- VIEWING A DIRECTORY ENTRY (AND PLACING A CALL)
- USING THE DIR BUTTON TO PLACE A CALL
- USING THE CALL LOG
- LOCKING AND UNLOCKING THE DIRECTORY, CALL LOG, AND ALL SOFTKEYS
- CHANGING OR REMOVING YOUR PASSWORD
- SELF-TEST
- CHOOSING THE CONTRAST LEVEL FOR THE DISPLAY
- SELECTING A PERSONALIZED RING
- SETTING THE RATE AT WHICH YOU VIEW THE DISPLAY MESSAGES
- TURNING ON OR OFF SOFTKEY INFORMATION TONES
- SETTING THE NUMBER OF NAMES ON THE DIRECTORY PAGE
- Tones and Their Meanings
- Labeling and Installing the Designation Card and the Telephone Number Card
- Installation
- Technical Description
- Index
3 Press
(the softkey) below Clock.
The display shows the date and time, such as:
Sep 24, 1992 10:00 AM
- + Quit
The display format for the clock is:
MMM DD, YYYY HH:MM AM or PM
in which MMM = month abbreviation, such as "Oct"
DD = day of the month such as "02" or "24"
YYYY = year such as "1992"
HH:MM = hour and minutes such as "10:45"
AM or PM = morning or afternoon
4 Do the following to change the date and/or time:
Use the softkey below + to go forward a month (such as from
"Sep" to "Oct"), to go forward a day (such as from "24" to "25"), a
year, an hour or a minute, or to switch between "AM" and "PM."
Use the softkey below - to go back a month (such as from "Sep"
to "Aug"), to go back a day (such as from "24" to "23"), a year, an
hour, or a minute, or to switch between "AM" and "PM."
NOTE: You can also use the dial pad to change the display
clock. For example, when the month is flashing on the screen,
you can press the 8 key to change the month to August, or, when
the date is flashing, enter "25" from the dial pad to select "25" as
the date. Use "A" for "AM" or "P" for "PM."
The display field, which you are currently viewing, such as "Sep,"
flashes. To go on to the next field, such as from "Sep" (the
month) to "24" (the day), press
Next >
. The Quit menu choice
at the lower right corner changes to Done.
5
When the correct date appears on the display
, press the softkey
below Done.
The display confirms your changes.
6 Once the clock has been set, you can now set the speakerphone.
Go on to the next procedure, "Setting the Speakerphone."
24