User`s manual

Table Of Contents

Initiating a self-test of the voice terminal’s lights, ringer, buttons, and

dial pad keys;

Selecting the contrast level for the display;

Selecting a personalized ringing pattern;

Setting the rate at which the display messages are shown on the

screen;

Adding confirmation or error tones to display messages;

Setting the number of names on a Directory page.

ENTERING AND EXITING SOFTKEY MODE

(USING THE MENU AND THE EXIT BUTTONS)

You can begin to use the softkeys by pressing the

button. The

main Menu screen that you see looks like this:

MENU >

Directory CallLog Option

Notice that the first line of the menu is fully capitalized, so that you know

the feature that you are responding to. The second line of the voice

terminal display shows the menu choices that you can select. To access

any of the choices, you must press the softkey below that menu choice.

For example, by using the menu above, you can enter your Directory by

pressing the leftmost softkey, the one under Directory. To access the

voice terminal Call Log, you would press the softkey below CallLog. To

view other softkey options, press the softkey below Option.

NOTE: If you press

while the Main Menu is on your display

screen, you will exit Softkey mode.

If you are at any other screen, pressing

will abandon any action

and return you to the Main Menu.

There are also "timed" informative screens which appear for only a few

seconds. You do not need to respond to these screens. (If you press

any of the softkeys during one of these timed messages, the display

advances to the next message.)

Press

Exit

at any time to exit softkey mode, abandon any softkey

functions in progress, and return to normal call-handling mode.