User`s manual
Table Of Contents
- Contents
- Introduction
- Your ISDN 8510T Voice Terminal
- Feature Descriptions
- Voice Features
- Features Accessed with the Display and Softkeys
- ENTERING AND EXITING SOFTKEY MODE (USING THE MENU AND THE EXIT BUTTONS)
- THE VOICE TERMINAL SELF-TEST FEATURE bbbbbbb
- USING THE NEXT, THE PREV, AND THE DIR BUTTONS
- RESPONDING TO ´QUIT´ AND ´DONE´
- A SOFTKEY DISPLAY SCREEN FLOWCHART
- SETTING THE CLOCK
- SETTING THE SPEAKERPHONE
- ADDING, EDITING, AND DELETING A NUMBER AND NAME IN THE DIRECTORY
- VIEWING A DIRECTORY ENTRY (AND PLACING A CALL)
- USING THE DIR BUTTON TO PLACE A CALL
- USING THE CALL LOG
- LOCKING AND UNLOCKING THE DIRECTORY, CALL LOG, AND ALL SOFTKEYS
- CHANGING OR REMOVING YOUR PASSWORD
- SELF-TEST
- CHOOSING THE CONTRAST LEVEL FOR THE DISPLAY
- SELECTING A PERSONALIZED RING
- SETTING THE RATE AT WHICH YOU VIEW THE DISPLAY MESSAGES
- TURNING ON OR OFF SOFTKEY INFORMATION TONES
- SETTING THE NUMBER OF NAMES ON THE DIRECTORY PAGE
- Tones and Their Meanings
- Labeling and Installing the Designation Card and the Telephone Number Card
- Installation
- Technical Description
- Index
SPEAKERPHONE AND SPEAKER
NOTE: Your voice terminal is set for the Speaker (listen-only)
or
for the
Speakerphone (listen and speak) function
or
for neither. Check with
your System Manager to see how your voice terminal is set.
Speaker
Use the following procedures if your voice terminal is set for the Speaker
(listen only) feature.
To place/answer a call without lifting the handset or to use the
speaker with any listening-only feature
1 Press
Speaker
.
The red light next to
Speaker
and the red light next to
Mute
go
on.
2 Place or answer the call or access a selected feature.
3 If you are placing a call, dial the telephone number.
4 Adjust speaker volume, if necessary.
To raise the volume, press the right half of the Volume control
button labeled
;
to lower the volume, press the left half of the Volume control
button labeled
.
5 Press
Speaker
to hang up.
The red light next to
Speaker
and the red light next to
Mute
go
off.
To activate the speaker while using the handset
1 Press
Speaker
.
The red light next to
Speaker
and the red light next to
Mute
go on.
The speaker is active, and the handset is turned off.
2 Hang up handset.
NOTE: If you want to speak to the other party, you must pick up the
handset (which turns off the speaker).
15