User`s guide

DEFINITY® ECS Release 5 8410 Voice Terminal User’s Guide 555-230-763 Issue 2
June 1997
Page 29
Resetting the Speakerphone with the Softkeys
(When Powering Up the Voice Terminal)
Important: You can use the Reset Speakerphone feature only on those 8410D voice
terminals on which the
Reset Spkr label appears under the button.
When you first power up the 8410D voice terminal, the following display appears.
When you reset the speakerphone on your voice terminal, you hear a set of tones as the
speakerphone performs an acoustic test of the environment. When the tones stop, your
speakerphone has finished adjusting itself for optimal performance and is ready for use.
For more information about the Reset Speakerphone feature, see “Reset Speakerphone”
in the section Voice Feature Procedures later in this guide.
Note: If you are using an 8410B voice terminal, you must press (if it appears on
your voice terminal) and then to reset the speakerphone. If you are using an
8410B without the button, the voice terminal will automatically reset the built-in
speakerphone when needed.
Speaker
PLEASE RESET SPKR.
Begin Cancel
Shift
Speaker
Shift