User`s guide
Table Of Contents
- Table of Contents
- Your 7406 Plus Voice Terminal
- What the Features Do
- How to Use the Features
- Voice Features
- Handset and Speaker
- Abbreviated Dialing (AD)
- Automatic Callback
- Bridging
- Call Coverage
- Call Forwarding All Calls
- Call Park
- Call Pickup
- Conference
- Drop
- Hold
- Intercom (Automatic/Dial)
- Last Number Dialed
- Leave Word Calling (LWC)
- Message
- Mute
- Priority Calling
- Reset Speakerphone
- Select Button
- Select Ring (and Ringer Volume)
- Self-Test
- Send All Calls
- Speaker
- Speakerphone
- Transfer
- Voice Message Retrieval
- Display Features
- Tones and Their Meanings
- Troubleshooting
- Key Words to Know
- Quick Reference Lists
Troubleshooting
Problem
A feature doesn’t
work as noted in
the book.
Solution
1
2
3
4
Reread the procedure and try again.
For many features you must lift the handset before you
can use the feature.
Check with your System Manager to be sure this feature
is administered on your voice terminal.
You may have an older version of the System 75 software
so that some features may have slight differences from
the procedures described in this guide. Check the
section below on “Version Notes” for ways in which these
features work differently.
Problem
There are no
Feature Codes
(such as Call
Forward code or
Send All Calls
code) written in
the appropriate
blanks in
this guide.
Solution
See your System Manager for a list of Feature Codes for
features assigned to your voice terminal. Then, write the
codes in this guide.
34