Communications System Owner Manual

ManualsBrandsAT&T ManualsNetwork RouterDEFINITY 7400 series

291

292

293

294

295

296

297

298

299

300

Table Of Contents

Table of Contents
ABOUT THIS DOCUMENT
- PREREQUISITE SKILLS AND KNOWLEDGE
- DOCUMENT ORGANIZATION
- HOW TO MAKE COMMENTS ABOUT THIS DOCUMENT
1. INTRODUCTION TO CONNECTIVITY
- TRANSMISSION TYPES
- TRANSMISSION STATES
  - VOICE TRANSMISSION
    - Entering the Switch
    - Exiting the Switch
  - DATA TRANSMISSION
- MULTIPLEXED COMMUNICATION
- TRUNKING
2. COMMUNICATION SYSTEM NETWORKING (em AN OVERVIEW
- TYPES OF NETWORKS
- NETWORK EVOLUTION
- SOFTWARE CAPABILITIES
- NETWORK CALL PROCESSING
- NETWORK ADMINISTRATION
- PRIVATE NETWORK TRUNKS
- NETWORKING FEATURE PARAMETERS
3. TANDEM TIE TRUNK NETWORKS
- INTERACTIONS WITH OTHER NETWORKS
4. MAIN-SATELLITE/TRIBUTARY (MS/T) NETWORKS THROUGH THE UDP OR MULTIPREMISES PACKAGES
- MS/T CONFIGURATIONS
  - Main-Satellite Configuration
  - Main-Tributary Configuration
- MS/T FEATURES
- ENGINEERING CONSIDERATIONS
- INTERACTIONS
5. ELECTRONIC TANDEM NETWORK (ETN) THROUGH THE ETN AND PNA PACKAGES
- ETN CONFIGURATIONS
- ETN TRUNKS
  - Access and Bypass Access Tie Trunks
  - Off-Net Trunks
- FEATURES
- ETN INTERACTIONS WITH OTHER NETWORKS
- ENGINEERING CONSIDERATIONS
6. DISTRIBUTED COMMUNICATIONS SYSTEM (DCS)
- DCS CLUSTERS
- DCS LINKS
  - Tie Trunks
  - Signaling Links
- DCS SIGNALING LINK CONNECTIONS
- TRANSPARENT FEATURES
- ENGINEERING CONSIDERATIONS
- ADMINISTRATION CONSIDERATIONS
7. DATA CONNECTIVITY - AN OVERVIEW
- DATA COMMUNICATIONS VARIABLES
- SPECIAL DATA FEATURES
8. DATA COMMUNICATIONS CAPABILITIES
- DTE CONNECTIONS
- LOCAL AREA NETWORK CONNECTIONS
- PUBLIC AND PRIVATE DATA NETWORK CONNECTIONS
  - PUBLIC DATA NETWORKS
    - Packet-Switched Public Data Networks
    - Circuit-Switched Public Data Networks
  - PRIVATE DATA NETWORKS
    - Terrestrial Private Data Network Links
    - Satellite Private Data Network Links
- TELEMARKETING HOST CONNECTIONS
  - THE ISDN GATEWAY
  - THE INTEGRATED TELEMARKETING GATEWAY
- DATA NETWORK ADMINISTRATION
9. DATA COMMUNICATIONS CONFIGURATIONS
- DSC AND PSC CONNECTIONS
- SNA NODE CONNECTIONS
- CONNECTIONS THROUGH PUBLIC OR PRIVATE DATA NETWORKS
A. RELATED DOCUMENTS
B. SYNCHRONIZATION OF DIGITAL FACILITIES
- THE NEED FOR SYNCHRONIZATION
- SYNCHRONIZATION HIERARCHY
- CHANGES TO THE SCS SOFTWARE MADE AVAILABLE VIA SOFTWARE PATCHES
- NETWORK SYNCHRONIZATION AND ENGIINEERING
- AVAILABILITY OF SYNCHRONIZATION SOURCES
- CONCLUSIONS ON SYNCHRONIZATION
- USE OF GENERIC 2 AS A SYSTEM CLOCK REFERENCE
- USE OF GENERIC 1 AS A SYSTEM CLOCK REFERENCE
C. TRUNKING TERMS AND CAPABILITIES
D. COMMUNICATIONS PROTOCOLS
- OSI MODEL
- STANDARD PROTOCOLS
- AT&T PROTOCOLS
E. LEAD DEFINITIONS
F. NETWORKING FEATURES - AVAILABILITY MATRIX
ABBREVIATIONS
GLOSSARY
INDEX

E-8 LEAD DEFINITIONS

_ ___________________________________________________________________________________________________________________________

Notes: Notes:

1. The SN238 and TN726 circuit packs provide the same signal leads as the ADU/MADU.

2. This lead is ignored in MODE 2 operation.

3. These leads are tied together on this terminal.

4. This lead is used for speed mode indication.

5. These leads are provided on PC 6300s that have the Z8530 SCC option.

6. This lead is used for remote loopback.

7. This lead functions as the ring indicator.

8. This lead functions as the Make Busy/Local Loopback signal and must be connected to pin 18 or

pin 25 of the interface connector. This permits a make-busy signal to be transmitted from the

computer to the MADU.

9. This lead functions as the CU circuit (speed select).

10. This lead is used for receive current loop return.

11. This lead is the CM circuit for Output and the TM circuit for Input.

12. This lead is the CM circuit for Input and the TM circuit for Output.