Communications System Owner Manual
Table Of Contents
- Table of Contents
- ABOUT THIS DOCUMENT
- 1. INTRODUCTION TO CONNECTIVITY
- 2. COMMUNICATION SYSTEM NETWORKING (em AN OVERVIEW
- 3. TANDEM TIE TRUNK NETWORKS
- 4. MAIN-SATELLITE/TRIBUTARY (MS/T) NETWORKS THROUGH THE UDP OR MULTIPREMISES PACKAGES
- 5. ELECTRONIC TANDEM NETWORK (ETN) THROUGH THE ETN AND PNA PACKAGES
- 6. DISTRIBUTED COMMUNICATIONS SYSTEM (DCS)
- 7. DATA CONNECTIVITY - AN OVERVIEW
- 8. DATA COMMUNICATIONS CAPABILITIES
- 9. DATA COMMUNICATIONS CONFIGURATIONS
- A. RELATED DOCUMENTS
- B. SYNCHRONIZATION OF DIGITAL FACILITIES
- THE NEED FOR SYNCHRONIZATION
- SYNCHRONIZATION HIERARCHY
- CHANGES TO THE SCS SOFTWARE MADE AVAILABLE VIA SOFTWARE PATCHES
- NETWORK SYNCHRONIZATION AND ENGIINEERING
- AVAILABILITY OF SYNCHRONIZATION SOURCES
- CONCLUSIONS ON SYNCHRONIZATION
- USE OF GENERIC 2 AS A SYSTEM CLOCK REFERENCE
- USE OF GENERIC 1 AS A SYSTEM CLOCK REFERENCE
- C. TRUNKING TERMS AND CAPABILITIES
- D. COMMUNICATIONS PROTOCOLS
- E. LEAD DEFINITIONS
- F. NETWORKING FEATURES - AVAILABILITY MATRIX
- ABBREVIATIONS
- GLOSSARY
- INDEX
D-6 COMMUNICATIONS PROTOCOLS
_ ___________________________________________________________________________________________________________________________
_ ___________________________________________________________________________________________________________________________
_ ___________________________________________________________________________________________________________________________
Table D-1. Some CCITT Digital Standards
________________________________________________________________________________________________________
Name Title Equivalent
Standard(s)
________________________________________________________________________________________________________
________________________________________________________________________________________________________
X.1 International user classes of service in public data networks ANSI X3.1; RS-269-B; FED-STD
1001; FIPS 22-1
________________________________________________________________________________________________________
X.2 International user services and facilities in public networks INT-FED-STD 0001041
________________________________________________________________________________________________________
X.4 General structure of signals of international alphabet no. 5 code for
data transmission over public data networks
CCITT V.4; ISO 1155; ANSI X3.15;
FED-STD 1010; FIPS 16-1
________________________________________________________________________________________________________
X.20 Interface between data terminal equipment (DTE) and data circuit-
terminating equipment (DCE) for synchronous operation on public
data networks
None.
________________________________________________________________________________________________________
X.20bis Use on public data networks of DTE which is designed for
interfacing to asynchronous duplex V.series modems
RS-232C
________________________________________________________________________________________________________
X.21 Interface between DTE and DCE for circuit-switched synchronous
operation on public data networks
None.
________________________________________________________________________________________________________
X.21bis Use on public data networks of DTE which is designed for
interfacing to synchronous duplex V.series modems
RS-232C; RS-449
________________________________________________________________________________________________________
X.25 Interface between DTE and DCE for terminals operating in the
packet mode on the public data networks
INT-FED-STD 001041
________________________________________________________________________________________________________
X.27 Electrical characteristics for balanced double-current interchange
circuits for general use with integrated circuit equipment in the field
of data communications
CCITT V.11; RS-422A; FED-STD
1020A
________________________________________________________________________________________________________
X.28 DTE/DCE interface for a start-stop mode data terminal equipment
accessing packet assembly/disassembly facility (PAD) in a public
data network situated in the same country
None.
________________________________________________________________________________________________________
X.29 Procedures for the exchange of control information and user data
between a packet assembly/disassembly facility (PAD) and a packet
mode DTE or another PAD
None.
________________________________________________________________________________________________________
X.75 Terminal and transit call control procedures and data transfer system
on international circuits between packet-switched data networks
None.
________________________________________________________________________________________________________
X.96 Call progress signals in public data networks INT-FED-STD 001041
________________________________________________________________________________________________________
X.400 Defines the model for the overall message handling environment (for
OSI layers 4-7)
None.
________________________________________________________________________________________________________