Instruction manual

Feature operation
Issue 4 July 2001 41
c. If the called person does not want to talk to the calling person, does
not answer, or the number is busy, press the
CANCEL button.
■ The outgoing call is canceled.
■ The call progress tone stops.
■ The console is connected to the original call.
■ The Split lamp goes off.
Explain to the calling person that the called person is not available.
Take a message, or ask the calling person to try again later. Then
press the
RELEASE button.
■ You are disconnected from the call.
■ The Split lamp goes off.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The Position Available lamp goes on.
■ The console returns to the normal operating mode.
d. To set up a 3-way connection, press the
SPLIT button before or after
the called person answers.
■ The console, calling person, and called person are connected
together.
■ The Split lamp goes off.
To drop out of the 3-way connection, press the
RELEASE button.
■ You are disconnected from the call.
■ The Split lamp goes off.
■ The call appearance lamp goes off.
■ The display goes blank.
■ The Position Available lamp goes on.
■ The console returns to the normal operating mode.