Instruction manual

Console operations
20 DEFINITY ECS Console Operations Quick Reference
Class of restriction
When users request that you place long-distance or even local calls, you should
check their assigned class of restriction (COR) before you complete the call. If
they are not restricted from certain calls, you may complete the call for them.
To check on a user’s COR:
1. While on an active call, press the
CLASS (COR) button.
■ The Class (COR) lamp goes on.
■ The display shows the user’s COR value (a two-digit code) and a
four-character restriction identifier, such as:
The COR call restriction identifiers are the following:
■ ORIG — Origination restriction; calls of any type are not allowed
from that extension.
■ OTWD — Outward Restriction; calls to numbers outside of the
system are not allowed from that extension.
■ TOLL — Toll Restriction; toll calls are not allowed from that
extension.
■ NONE — No restrictions are active for that extension.
2. Follow local procedures for handling calls from restricted extensions.
a = <Name> 01 NONE