Specifications

Issue 11 December 1999 23-1
23
Blank Templates for Model Design
The Software Associate can use the following blank templates to create models
for administering groups of terminals at a customer site. Use the following
procedures for filling out these forms.
1. In each button space write the telephone number, extension, feature code,
or feature to be administered on that button. Note that some of the voice
terminals have double-level buttons on which you can designate two
features.
2. If the model design is to be used on other voice terminals, write the Model
Name at the top of the form beside Model Name.
3. Fill in your name by Software Associate.
4. Write the numbers and letters of the project code beside Project Code.
5. When the customer has approved the button assignments designated on
the templates, have the customer sign the form beside Customer
Approval.
6. Beside Date, write the date that the customer signed the form.
The following voice terminal templates are available for your use:
■ 6408+
■ 6408D+
■ 6416D+ and 6416D+M
■ 6424D+ and 6424D+M
■ 7402 Plus
■ 7406D