Specifications

Table Of Contents
Data Modules
21-30 Issue 11 December 1999
For those PC packages used to dial voice calls, the modem configuration must be
set to PULSE (P) (even though the 8400B Plus will use Touch-Tone for voice
calls). If given a choice, set modem type to HAYES.
NOTE:
While the 8400B Plus supports simultaneous voice and data, the packages
listed here support alternate voice/data dialing only. Voice dialing packages
interfere with data operation by remapping the COM port or by hanging up
the data call.
NOTE:
You can dial a data call while on a voice call. In all cases, the linked
telephone will work.
FCC Registration
These data modules are not FCC registered. The 8400B Plus data module meets
Part 15 Class A requirements and is labeled as such.
8400B Plus Data Module PECs
The 8400B Plus data module can be ordered in the United States using the
following PECs:
8400B Plus Data Module
PEC: 2172-2WB
Comcode: 407444835
(This package contains the data module, a D8W telephone cord, an
M9/F25 Adapter, and an adjunct power kit containing a 400B2 Adapter, a
D6AP-87 cord, and a KS-22911.L2 power supply.)
NOTE:
The 8400B Plus data module comes with a stand-alone power supply.
However, it can also be closet powered.
Additional Documents
The following documents contain additional information relating to the 8400B Plus
data module:
8400B Plus Data Module Users Guide, 555-020-709