Manualshelf

Specifications

ManualsBrandsAT&T ManualsComputer equipmentDefinity 6402D
501502503504505506507508509510
Table Of Contents
The 8100 Series Telephones
16-20 Issue 11 December 1999
PROGRAM and PAUSE buttons
Both of these buttons are used for storing numbers on the pre-programmed
dialing buttons on the upper half of the faceplate of the telephone. The PAUSE
button can be used to insert one or more one half-second pause/delay into a
telephone number stored on a programmable dialing button or into a dialing
access code in the (Redial) Auto-Pause feature.
Other Physical Features
Ringing
The 8110 and 8110M telephones have electronic tone ringing. The ringer volume
control is a 3-position switch on the right side of the housing.
The user can also use a Tone Selector (labeled “LO HI”) for selecting one of two
tone ringer frequencies and a second Tone Selector (labeled “SLOW FAST”) for
selecting one of two tone ringer modulation rates. Both Tone Selector switches
are on the right side of the telephone.
Mounting Options
The 8110 and 8110M telephones come equipped with a desk stand which can be
turned upside-down and used for wall mounting the telephone.
Jacks
The 8110 and 8110M telephones have a Line jack on the back of the telephone for
connecting a line cord, and a Handset cord jack for connecting the handset.
These telephones also have a Data jack on the rear of the telephone for
connecting a device such as a modem or a personal FAX to the telephone.
NOTE:
The 8110 and 8110M telephones have no connector for the S201A
Speakerphone or 500A Headset Adapter.
The 8110 and 8110M telephones also have an auxiliary power jack which can be
used for improving the performance of the built-in speakerphone on long loops
where there is limited power available from the line. In certain circumstances,
other than extended loop lengths, it may also be necessary to use adjunct power.
Handset
The 8110 and 8110M telephones are equipped with a K-type handset. A K-type
amplified handset can also be used with these telephones.
Dial pad
The 8110 and 8110M telephones are equipped with a 12-button touch-tone dial
pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for
directory access, and the “5” button on the dial pad has raised bars for
visually-impaired users.