Specifications

Table Of Contents
CALLMASTER Voice Terminals
13-14 Issue 11 December 1999
Cords
A D8W-87 line cord and a Handset cord are provided with all CALLMASTER
voice terminals. An EIA/TIA Data cord is also shipped in the box with the
CALLMASTER VI set.
Kneewell Adapter (602 CALLMASTER only)
An optional adapter is available for connecting two headsets or handsets to the
602 CALLMASTER. This adapter allows the handset or headset to be connected
without the cords running across the top of the desk.
Ringing
The CALLMASTER voice terminals have electronic tone ringing with patterns that
are set at administration.
Mounting Options
All the CALLMASTER voice terminals, except the CALLMASTER VI, are only
available as a desk model; they cannot be wall mounted. The CALLMASTER VI
can be used on a flat surface such as a desk, or it can be mounted with velcro
strips on a wall or on the side of the PC.
Color Options
The 602 CALLMASTER is available in black and misty cream. The
CALLMASTER II, CALLMASTER III, and CALLMASTER IV sets are available in
black, misty cream, and white. The CALLMASTER V is available in gray and
white. The CALLMASTER VI is available only in international (charcoal) gray.
Wiring Information on the CALLMASTER IV
The CALLMASTER IV voice terminal works in both 4-wire and 2-wire DCP
configurations. The table on the next page shows pin assignments for the line
cord and jack block interface
Table 13-1. The DCP Line Interface for the CALLMASTER IV
CONNECTOR BLOCK DCP JACK INTERFACE
Conn.
Block Pin
Number
D Inside
Wire
Color
Pin Name Signal Description
3 W-O 1 OD1 Balance output from
telephone (power 48V)
4-wire application
REC-1 Output to Recorder
2-wire application