Specifications

The 8400 Series Voice Terminals
12-68 Issue 11 December 1999
Figure 12-19. Button Numbering for Administering the 8411 Voice Terminal Connected
to a System 85 or a DEFINITY G2
Administering the Analog Adjunct
As noted in Table 12-22 and 12-23, the 8411D can be administered as itself ONLY
IF it is connected to a DEFINITY G3V4, Issue 3 (or later) switch. In Native Mode
the voice terminal is administered through a digital line circuit card with a line
number (with the usual three call appearances) assigned to the I-1 Channel. A
second line number can be administered through the same digital line card on the
I-2 Channel, but this line number can only be used for analog adjuncts connected
to the Analog Adjunct jack on the 8411. This Analog Adjunct is assigned a private
number, but can be used only for placing or terminating a call. It cannot be used
Volume
Shift Transfer
Test Conf
Mute Drop
Speaker Hold
1
23
456
789
ABC DEF
MNOJKLGHI
PQRS TUV WXYZ
*
O
#
NextPrevMenu Exit
If the 8411D is administered
The 10 call
3
4
5
6
7
8411D
8
9
10
11
12
Message
Ring
as a 7405D, administer the
12 softkey features on
“FEATURE BUTTON
ASSIGNMENTS” 14 through
25; administer the Normal
feature on Button #13.
If the 8411D is administered
as an 8410D, administer the
12 softkey features on
“SOFTKEY BUTTON
ASSIGNMENTS”
1 through 12.
appearance/feature
buttons are administered as
“BUTTON ASSIGNMENTS”
3 through 12.