Specifications

The 7400 Series Voice Terminals
11-104 Issue 11 December 1999
■ SELECT RING button — a special fixed feature button that has two
functions:
— When used with the * dial pad key, it allows the user to select one of
eight personalized ringing patterns for incoming calls.
— When used with the DROP button, it allows the user to test the
lights, ringer, and display module (if installed) of the voice terminal.
The Select Ring test function replaces the Self-Test switch found on
most other terminals.
NOTE:
The associated Select Ring light goes on steadily when the button is
pressed to activate either function. It winks when the user is stepping
through the ringing patterns.
Administrable Buttons
The 7434D voice terminal has 34 call appearance/feature buttons (R2V1 and
R2V2 only), each equipped with a triangular red light and a square green status
light. Usually, at least three of these buttons (the top three in the leftmost column)
are administered as call appearances for the terminal’s primary extension
number, where calls are placed and answered. The rest of the buttons can be
used for more call appearances (including bridged appearances of other stations’
extensions) and features. Buttons administered for features have only their status
lights active.
Message light
The green light goes on when a message is left for the terminal user. It goes off
when the user retrieves the message.
Other Physical Features
Handset
The 7434D voice terminal is equipped with an R-type handset.
Dial pad
The 7434D voice terminal is equipped with a 12-button touch-tone dial pad.
Jacks
The 7434D voice terminal housing contains three jacks. The handset cord jack is
just under the left front edge of the housing. It is identified by a picture of a
handset molded into the plastic. The LINE jack and the OTHER jack (for adjunct
connections) are on the bottom center of the housing. The handset contains a
jack for the handset cord.