Manualshelf

Specifications

ManualsBrandsAT&T ManualsComputer equipmentDefinity 6402D
111112113114115116117118119120
Table Of Contents
The 6408+ and 6408D+ Telephones
Issue 11 December 1999
7-15
Speakerphone
The 6408+ and the 6408D+ telephones are equipped with a built-in 2-way
speakerphone. (The telephone can be optioned for a 1-way, listen-only speaker
instead. The system manager should have records of how this feature is
optioned.) The Speakerphone capability allows a user to engage in a hands-free
conversation with the far-end party. The speakerphone can be turned on or off
with the SPEAKER button; can be muted with the MUTE button, and the volume
can be raised and lowered with the VOLUME “arrow” button.
Speaker (Listen-Only) Feature
The 6408+ and the 6408D+ have a two-way speakerphone; however, these two
telephones can be optioned instead for a 1-way, listen-only speaker. If this is the
case, use the SPEAKER button on the front of the telephone for turning on and off
the speaker.
The Speaker (listen-only) capability allows a user to engage in a 1-way
conversation with the far-end. Specifically, the user can only listen to the far-end.
To speak with the far-end, the user must use the handset which turns off the
speaker. The Speaker function may also be disabled.
MUTE Button
The MUTE button is a fixed feature button with a red status light. The MUTE
button turns off the microphone of the built-in speakerphone or the handset so
that a person can converse with another person in the room without the other
party listening in.
HOLD Button
The red HOLD button can be used for putting a call on hold. When a call is on
hold, the green light next to the held call flashes.
REDIAL Button
The REDIAL button can be used for rediaing the last number you dialed from the
dial pad.
TRANSFER/TEST button
The TRANSFER/TEST button can be used in a couple ways: When the telephone
is off-hook, the user can press the TRANSFER button to transfer a call. When the
phone is on-hook, the user can use the TRANSFER button to test the lights and
the display. (In the latter case, all the display segments fill in.)
CONFERENCE/RING Button
The CONFERENCE/RING button can be used in a couple ways: When the
telephone is off-hook, the user can use this button to set up a conference call with
five other people. When the phone is on-hook, the user can press this button to
select a personalized ringing pattern from among eight different patterns.