DEFINITY® Enterprise Communications Server and System 75 and System 85 Terminals and Adjuncts Reference 555-015-201 Comcode 108603994 Issue 11 December 1999
Copyright 1999, Lucent Technologies All Rights Reserved Printed in USA Ordering Information Call: Lucent Technologies BCS Publications Center Voice 1 800 457-1235 International Voice 317 322-6791 Fax 1 800 457-1764 International Fax 317 322-6699 Write: Lucent Technologies BCS Publications Center 2855 N. Franklin Road Indianapolis, IN 46219 Order: Document No.
Contents 1 2 Introduction ■ The Purpose of This Manual 1-1 ■ The Organization of This Manual 1-4 General Information ■ 3 4 1-1 2-1 Voice Terminals 2-1 Single-Line Voice Terminals 2-2 Multi-Appearance Voice Terminals 2-2 Facilities Common to All Voice Terminals 2-5 Buttons 2-5 Lights 2-8 Tones 2-10 Desk/Wall Mounting Arrangements 2-12 ■ Adjuncts 2-12 ■ Data Modules 2-15 ■ PC Platform Products 2-18 ■ Data Terminals 2-19 ■ Technical Specifications 2-19 Call Progress
Contents 5 Contents of the 1151A1 and 1151A2 Packages (and Comcodes) 4-9 Connecting the Power Supply 4-10 Administration 5-1 ■ Aliasing 5-2 ■ Button and Feature Caveats 5-11 System 75, DEFINITY G1 and G3, and DEFINITY ECS 5-11 System 85 and DEFINITY G2 5-12 6 Voice Terminal Features 6-1 7 The 6400 Series Telephones 7-1 ■ ■ iv The 6402 and 6402D Telephones 7-2 Applications 7-4 Physical Features 7-4 Wiring Information 7-7 Appropriate Circuit Packs and Distance Limitations 7
Contents ■ ■ Applications 7-14 Physical Features 7-14 Wiring Information 7-20 Appropriate Circuit Packs and Distance Limitations 7-21 Power Requirements 7-21 Administration 7-21 Power Failure Operation 7-22 FCC Registration 7-22 UL and CSA Approval 7-23 Hearing Aid Compatible 7-23 6408 Telephones and Equipment PECs and Comcodes 7-23 Adjuncts 7-24 Additional Documents 7-24 The 6416D+ and 6416D+M Telephones 7-25 All 6416D+ and 6416D+M Telephones 7-25 Only the Modular 6416D+M T
Contents 8 7-40 Physical Features 7-41 Wiring Information 7-47 Appropriate Circuit Packs and Distance Limitations 7-48 Power Requirements 7-48 Power Failure Operation 7-50 FCC Registration 7-50 UL and CSA Approval 7-50 Hearing Aid Compatible 7-50 6424D+ and 6424D+M Equipment PECs and Comcodes 7-51 Adjuncts 7-52 Additional Documents 7-52 The 7100 Series Voice Terminals ■ ■ vi Applications The 7101A Voice Terminal 8-1 8-2 Applications 8-3 Physical Description 8-3 Distance Li
Contents ■ ■ ■ Hearing Aid Compatible 8-11 7102 Equipment PECs 8-11 Adjuncts 8-11 Additional Documents 8-11 The 7103A Fixed Feature Voice Terminal 8-12 Applications 8-13 Physical Description 8-13 Distance Limitations 8-15 Power Requirements 8-15 Power Failure Operation 8-15 FCC Registration 8-15 Hearing Aid Compatible 8-16 7103A (Fixed Feature) Equipment PECs 8-16 Adjuncts 8-16 Additional Documents 8-16 The 7103A Programmable Voice Terminal 8-17 Applications 8-18 Physic
Contents 9 ■ Additional Documents 8-27 The 7203H Voice Terminal 9-1 9-2 Applications 9-3 Physical Description 9-3 Distance Limitations 9-5 Power Requirements 9-5 Power Failure Operation 9-5 FCC Registration 9-5 Hearing Aid Compatible 9-5 7203H Equipment PECs 9-5 Adjuncts 9-6 Additional Documents 9-6 The 7205H Voice Terminal 9-7 Applications 9-8 Physical Description 9-8 Distance Limitations 9-10 Power Requirements 9-10 Power Failure Operation 9-10 FCC Registration 9-10
Contents ■ 11 Power Requirements 10-5 Power Failure Operation 10-5 FCC Registration 10-5 Hearing Aid Compatible 10-6 7303S Equipment PECs 10-6 Adjuncts 10-6 Additional Documents 10-6 The 7305S Voice Terminal 10-7 Applications 10-8 Physical Description 10-8 Distance Limitations 10-10 Power Requirements 10-10 Power Failure Operation 10-10 FCC Registration 10-10 Hearing Aid Compatible 10-11 7305S Equipment PECs 10-11 Adjuncts 10-11 Additional Documents 10-11 The 7400 Seri
Contents ■ ■ ■ x Adjuncts 11-14 Additional Documents 11-15 The 7402 Plus Voice Terminal 11-16 Applications 11-17 Physical Features 11-17 Distance Limitations 11-20 Power Requirements 11-20 Switch Administration 11-21 Power Failure Operation 11-23 FCC Registration 11-24 UL and CSA Approval 11-24 Hearing Aid Compatible 11-24 7402 Plus Equipment PECs and Comcodes 11-24 Adjuncts 11-25 Additional Documents 11-26 The 7403D Voice Terminal 11-27 Applications 11-28 Physical Des
Contents ■ ■ ■ Adjuncts 11-36 Additional Documents 11-36 The 7405D Voice Terminal 11-37 Applications 11-38 Physical Description 11-38 Distance Limitations 11-40 Power Requirements 11-40 Power Failure Operation 11-40 FCC Registration 11-40 Hearing Aid Compatible 11-41 7405D Equipment PECs 11-41 Adjuncts 11-41 Additional Documents 11-41 The 7406D, 7406BIS, and 7406 Plus Voice Terminals 11-42 Applications 11-46 Physical Description 11-46 Distance Limitations 11-51 Power Re
Contents ■ ■ xii Switch Administration 11-77 Power Failure Operation 11-83 FCC Registration 11-83 UL and CSA Approval 11-84 Hearing Aid Compatible 11-84 7407D/Enhanced 7407D Equipment PECs and Comcodes 11-84 7407 Plus Equipment PECs and Comcodes 11-85 Adjuncts 11-86 Additional Documents 11-87 The 7410D and 7410 Plus Voice Terminals 11-88 Applications 11-90 Physical Description 11-90 Distance Limitations 11-93 Power Requirements 11-93 Switch Administration 11-94 Power Failur
Contents ■ 12 The 7444 Voice Terminal 11-108 Applications 11-109 Physical Description 11-110 Distance Limitations 11-113 Power Requirements 11-114 Switch Administration 11-114 Power Failure Operation 11-118 FCC Registration 11-118 UL and CSA Approval 11-118 Hearing Aid Compatible 11-118 7444 Equipment PECs and Comcodes 11-118 Adjuncts 11-119 Additional Documents 11-119 The 8400 Series Voice Terminals ■ ■ 12-1 The 8403 Voice Terminal 12-2 Applications 12-3 Physical Feature
Contents ■ ■ xiv Distance Limitations 12-26 Power Requirements 12-26 Switch Administration 12-27 Power Failure Operation 12-30 FCC Registration 12-30 UL and CSA Approval 12-31 Hearing Aid Compatible 12-31 8405 Equipment PECs and Comcodes 12-31 Adjuncts 12-32 Additional Documents 12-33 The 8410 Voice Terminal 12-34 Applications 12-36 Physical Features 12-36 Wiring Information 12-43 Distance Limitations 12-44 Power Requirements 12-44 Switch Administration 12-45 Power Fail
Contents ■ 13 8411 Equipment PECs and Comcodes 12-69 Adjuncts 12-70 Additional Documents 12-71 The 8434 and 8434DX Voice Terminals 12-72 Applications 12-75 Physical Description 12-75 Wiring Information 12-82 Distance Limitations 12-83 Power Requirements 12-83 Switch Administration 12-84 Power Failure Operation 12-87 FCC Registration 12-88 UL and CSA Approval 12-88 Hearing Aid Compatible 12-88 8434 and 8434DX Equipment PECs and Comcodes 12-88 Adjuncts 12-89 Additional Docum
Contents 14 13-24 Adjuncts 13-25 Additional Documents 13-26 The 500 and 2500 Series Telephones ■ ■ ■ xvi CALLMASTER Equipment PECs and Comcodes The 500 Series Telephone 14-1 14-2 Applications 14-2 Physical Description 14-3 Distance Limitations 14-4 Power Requirements 14-4 Power Failure Operation 14-4 FCC Registration 14-4 500-Series Telephone Equipment PECs 14-5 Adjuncts 14-5 Additional Documents 14-5 The 2500 Series Telephones 14-6 Applications 14-8 Physical Description
Contents ■ ■ ■ Adjuncts 14-15 Additional Documents 14-15 The 2500 YMGK Telephone 14-16 Applications 14-16 Physical Description 14-17 Distance Limitations 14-18 Power Requirements 14-18 Power Failure Operation 14-19 FCC Registration 14-19 2500 YMGK Equipment PECs 14-19 Adjuncts 14-19 Additional Documents 14-19 The 2500 MMGL and 2500 YMGL, 2500 MMGM and 2500 YMGM, and 2554 MMGM and 2554 YMGM Telephones 14-20 Applications 14-23 Physical Description 14-23 Distance Limitations
Contents 15 Hearing Aid Compatible 14-33 2500 MMGN and 2500 YMGP Equipment PECs 14-34 Additional Documents 14-34 The 6200 Series Telephones 15-1 ■ ■ xviii The 6210 Telephone 15-2 Applications 15-3 Physical Description 15-3 Distance Limitations 15-5 Power Requirements 15-5 Switch Administration 15-5 Power Failure Operation 15-5 Ringer Equivalency Numbers 15-6 FCC Registration 15-6 Hearing Aid Compatible 15-6 6210 Telephone PECs and Comcodes 15-6 Adjuncts 15-6 Additional D
Contents 16 The 8100 Series Telephones ■ ■ ■ 16-1 The 8101 and 8101M Telephones 16-2 Applications 16-4 Physical Description 16-4 Distance Limitations 16-6 Power Requirements 16-6 Switch Administration 16-6 Power Failure Operation 16-6 Ringer Equivalency Numbers 16-7 FCC Registration 16-7 Hearing Aid Compatible 16-7 8101 and 8101M Telephones PECs and Comcodes 16-7 Adjuncts 16-8 Additional Documents 16-8 The 8102 and 8102M Telephones 16-9 Applications 16-10 Physical Descrip
Contents 17 16-23 Administration of Hidden Features 16-23 Power Failure Operation 16-23 Ringer Equivalency Numbers 16-23 FCC Registration 16-23 Hearing Aid Compatible 16-23 8110 and 8110M Telephones Equipment PECs and Comcodes 16-24 Adjuncts 16-25 Additional Documents 16-26 ISDN Voice Terminals ■ ■ xx Switch Administration The ISDN 7505 Modular Terminal 17-1 17-2 Applications 17-3 Physical Description 17-3 Distance Limitations 17-5 Power Requirements 17-6 Terminating Resisto
Contents ■ ■ ■ Adjuncts 17-13 Additional Documents 17-13 The ISDN 7507 Display Terminal 17-14 Applications 17-15 Physical Description 17-15 Distance Limitations 17-18 Power Requirements 17-18 Terminating Resistor 17-18 Power Failure Operation 17-18 FCC Registration 17-18 Hearing Aid Compatible 17-18 7507 Equipment PECs 17-19 Adjuncts 17-19 Additional Documents 17-19 The ISDN 8503 Voice Terminal 17-20 Applications 17-21 Physical Description 17-21 Distance Limitations 17
Contents ■ 18 17-39 FCC Registration 17-39 Hearing Aid Compatible 17-39 8510T Equipment PECs and Comcodes 17-39 Adjuncts 17-40 Additional Documents 17-40 The ISDN 8520T Voice/Data Terminal 17-41 Applications 17-42 Physical Description 17-42 Data Features 17-47 Distance Limitations 17-47 Power Requirements 17-48 Switch Administration 17-48 The Service Profiler ID (SPID) 17-49 Hidden/Craft Features 17-49 Power Failure Operation 17-50 FCC Registration 17-50 Hearing Aid Compa
Contents Additional Documents ■ ■ 19 18-11 The MDW 9000 Wireless Telephone 18-12 Applications 18-15 Physical Features 18-15 Display Information 18-18 Out-of-Range Indication 18-19 Distance and Installation Limitations 18-19 Switch Administration 18-20 FCC Registration 18-21 Hearing Aid Compatibility 18-21 UL and CSA Approval 18-22 MDW 9000 Equipment PECs and Comcodes 18-22 Additional Documents 18-23 The MDW 9031DCP Wireless Pocket Phone Applications 18-26 Physical Features 18
Contents 20 Adjuncts ■ ■ ■ ■ ■ ■ Call Coverage Modules 20-2 Applications 20-3 Physical Description 20-3 Power 20-4 Considerations 20-4 Call Coverage Module PECs 20-4 Digital Display Modules 20-5 Applications 20-6 Physical Description 20-6 Power 20-8 Considerations 20-8 Digital Display Module PECs 20-8 Function Key Modules 20-9 Applications 20-10 Physical Description 20-10 Power 20-10 Considerations 20-10 Digital Terminal Data Module PEC Codes 20-11 The 801A Expans
Contents ■ ■ ■ ■ ■ Considerations 20-21 Physical Description 20-22 Power 20-24 Administering the Tip/Ring Module 20-24 100A Tip/Ring Module PECs and Comcodes 20-24 Additional Documents 20-25 Headset Adapters 20-26 Applications 20-26 Physical Description 20-27 Power 20-27 Considerations 20-28 Typical Headsets 20-28 500A and 502A Headset Adapter PECs 20-28 The Z34A Message Waiting Indicator 20-29 Applications 20-29 Physical Description 20-30 Power 20-30 Message Waiting
Contents ■ ■ ■ 21 20-40 S203A Speakerphone PECs 20-40 The 107-Type Loudspeaker ■ 20-41 Applications 20-41 Physical Description 20-42 Power 20-42 The 7404D (Voice Terminal) Messaging Cartridge 20-43 Applications 20-43 Considerations 20-44 Messaging Cartridge PECs 20-44 The 2870A1 Automatic Dialer 20-45 Applications 20-45 Physical Description 20-46 Power 20-46 Automatic Dialer PECs 20-46 Data Modules ■ xxvi FCC Registration The 7400A Data Module 21-1 21-3 Applications
Contents ■ ■ ■ Setting Options 21-12 Notes for Use with PC Packages 21-13 FCC Registration 21-13 7400B Data Module PECs 21-14 Additional Documents 21-14 The 7400D Low-Speed Asynchronous Data Module 21-15 Applications 21-15 Physical Description 21-16 Power Supply Unit 21-18 Tests 21-18 Data Module Features 21-18 Setting Options 21-19 FCC Registration 21-20 7400D Data Module PECs 21-20 Additional Documents 21-20 The 8400B Plus Data Module 21-21 Applications 21-21 Physical
Contents ■ ■ ■ ■ ■ xxviii The ISDN Asynchronous Data Module (ADM) 21-35 Physical Description 21-35 Features 21-35 Power Requirements 21-36 ISDN ADM PECs 21-36 Additional Documents 21-36 The Digital Terminal Data Module (DTDM) 21-37 Physical Description 21-38 Capabilities 21-40 Power 21-40 FCC Registration 21-40 DTDM Equipment PECs 21-40 Additional Documents 21-40 The Z702AL1 Data Service Unit (DSU) 21-41 Applications 21-42 Physical Description 21-42 Capabilities 21-43
Contents ■ ■ ■ ■ ■ ■ FCC Registration 21-56 DEFINITY HSL PECs 21-56 Additional Documents 21-56 The Processor Data Module (PDM) 21-57 Physical Description 21-58 Capabilities 21-59 Power 21-59 PDM Equipment PECs 21-59 Additional Documents 21-59 The Trunk Data Module (TDM) 21-60 Physical Description 21-61 Capabilities 21-62 Power 21-62 TDM Equipment PECs 21-62 Additional Documents 21-62 The Modular Processor Data Module (MPDM) 21-63 General Features of the MPDM 21-65 Fe
Contents ■ ■ ■ 22 21-85 Power 21-85 Z3A Data Module PECs 21-86 Additional Documents 21-86 The Multiple Asynchronous Data Unit (MADU) ■ 21-87 Capabilities 21-87 Physical Description 21-87 Power 21-89 MADU Circuit Pack PECs 21-89 Additional Documents 21-89 DCIU Interface Units 21-90 105A IDI 21-90 48250 LDSU 21-90 2500-Series DSU 21-90 The 2500-Series DSU 21-91 Physical Description 21-91 Capabilities 21-91 Mounting 21-92 Power 21-92 Distance Limitations 21-92 2500-
Contents ■ 23 PC/PBX PECs 22-7 Additional Documents 22-7 E78 Plus/ISDSN Software 22-8 Applications 22-8 Physical Description 22-8 Capabilities 22-8 E78 PECs 22-9 Additional Documents 22-9 Blank Templates for Model Design 23-1 Issue 11 December 1999 xxxi
Contents xxxii Issue 11 December 1999
Introduction 1 The Purpose of This Manual Voice terminals and adjuncts are voice and data devices that are connected to the system switch in a business communications system.
Introduction In Issue 3, three new sections were added and have since been maintained to reflect new products that have been introduced. The Exposed Port Protection section discusses the different protection required for lightning protection. The Adjunct Power section discusses the different types of adjunct power supplies available.
The Purpose of This Manual Digital Switch Adjunct Data Data Data Terminal Unit Data EIA Port Digital Port Analog Voice Terminal Voice Analog Port Digital Port Voice/Data Hybrid Voice Terminal Voice Hybrid Port Digital Port Voice/Data Voice Digital Voice Terminal Display/ Keyboard Data Terminal with Voice Digital Voice Terminal Data Module Data Adjunct Data Terminal Digital Voice Terminal Voice Digital Port Adjunct PC/PBX Voice/ Data Digital Port Digital Port Data Data Module D
Introduction The Organization of This Manual The remainder of this manual is divided into nine main sections; tabs are provided for convenient access to each section. All equipment descriptions are supported by illustrations. General Information — Gives background data that applies to the entire range of equipment covered in this manual. Exposed Port Protection — Contains information on the protection required by exposed ports.
The Organization of This Manual The 13 tabbed subsections and the voice terminals described in each subsection are listed as follows: 6400 SERIES Models 6402 and 6402D Models 6408+ and 6408D+ Models 6416D+ and 6416D+M Models 6424D+ and 6424D+M 7100 SERIES Model 7101A Models 7102A and 7102 Plus Models 7103A Fixed Feature and 7103A Programmable Model 7104A CALLMASTER 602 CALLMASTER CALLMASTER II CALLMASTER III CALLMASTER IV CALLMASTER V CALLMASTER VI 7200 SERIES Model 7203H Model 7205H 500/2500 SERIES Mo
Introduction Adjuncts — Contains information on the devices that can be used with voice terminals to supplement services and features. This section contains information on the controls, buttons, lights, and functions of a DEFINITY G1, G2, and G3, a DEFINITY ECS, System 75, or System 85 voice terminals and telephone adjuncts. Adjuncts that are identical in appearance and function, but have different codes, are covered under the same heading.
General Information 2 This section provides general information on all of the equipment described in this manual. Information is provided on voice terminals, adjuncts, data modules, and data terminals. Detailed information on these types of equipment can be found behind the tab for each particular type of equipment. Voice Terminals The advanced, multi-appearance voice terminals combine the capabilities of both a telephone and a terminal and have a variety of controlling and monitoring functions.
General Information Single-Line Voice Terminals The term “single-line” means that only one incoming call can be ringing at an idle terminal. Once an incoming call has been answered, however, a single-line voice terminal can handle both the active call and another call on hold or waiting. When a single-line terminal user is busy on a call, an incoming call does not ring but alerts the user via a “call waiting tone” (in the handset or speakerphone) that a call is waiting to be answered.
Voice Terminals ■ Digital voice terminals can support and control data terminals. ■ The Digital Communications Protocol (DCP) or ISDN-BRI interface between a digital voice terminal and the system switch supports simultaneous voice and data calls over the terminal’s standard mounting cord. ■ Digital terminals have a wider selection of adjuncts. ■ Call information displays are available with some digital voice terminals.
General Information Table 2-1.
Voice Terminals Table 2-1.
General Information — Put an active call on hold and obtain recall dial tone for making another call. — Disconnect from a second call and return to a call on hold, when pressed twice. — Place an active call on hold and answer a waiting call using Dial Access Code, then toggle between the two calls (using the Recall button and Dial Access Code). — Place an active call on hold; receive recall dial tone, and dial the Feature Access Code to answer a waiting call.
Voice Terminals ■ Speaker Button—turns on either a listen-only speaker or a 2-way speakerphone which allows the user to speak and listen to the far-end party. NOTE: On some voice terminals, this button also allows the user to initiate an acoustic test of the surrounding environment (the Reset Speakerphone feature) through a series of tones. When the tones stop, the speakerphone has finished adjusting itself for optimal performance.
General Information Call Appearance/Feature Buttons Usually Administered as Call Appearances of Terminal’s Primary Extension Number Administrable as Call Appearances or Features 1 6 2 7 3 8 4 9 5 10 Administrable as Call Appearances or Features NOTE: Example shows button field of 7410 Plus voice terminal. Other terminals may have different arrangements, but Buttons 1, 2, and 3 are always present. Figure 2-1.
Voice Terminals operational; the red light remains off at all times. Feature-only buttons have either a single green status light or no light at all. The various arrangements of red and green lights are shown in Figure 2-2. Green Status Light Green Status Light Red Light Red Light Green Status Light Two Styles of Light Arrangement for Call Appearance/Feature Buttons Figure 2-2.
General Information ■ Lighted steadily—the call appearance is busy or the assigned feature is active. ■ Flashing (slow on-off for equal periods, one cycle per second)—an unanswered incoming call on that call appearance. ■ Fluttering (fast on-off for equal periods, 10 cycles per second)—a call placed on hold on that call appearance by the voice terminal user. ■ Broken Fluttering (fast on-off modulated at the slow rate)—feature denial to the calling voice terminal or an unknown or invalid action.
Voice Terminals Handset Tones The following tones are heard through the handset: ■ Answer Tone—a high-pitched continuous tone indicating that a data endpoint has answered. ■ Busy Tone—a low-pitched tone repeated 60 times a minute; indicates that the number dialed is in use. ■ Call Waiting Tone (Single-Line Voice Terminals)—one, two, or three beeps (short bursts of high-pitched tone), not repeated; indicates to the user at a busy single-line terminal that an incoming call is waiting to be answered.
General Information ■ Warning Tone (Bridging)—(a low-pitched tone heard by all parties in a Busy Verification attempt that bridges on to an active call) initially applied in a 2-second (System 75 and G1) or 4-second (System 85 and G2) burst, then in half-second bursts every 15 seconds. Desk/Wall Mounting Arrangements All the voice terminals covered in this manual, except the Model 2554, are intended for free-standing desktop use.
Adjuncts Table 2-2.
General Information Table 2-2.
Data Modules Table 2-2. Adjunct/Voice Terminal Compatibility — Continued Adjunct Terminals Function Speakerphone, S102A Same as 502A Speakerphone, S202A Headset Adapter Provides hands-free calling Provides improved voice quality by adapting to room acoustics Speakerphone, 4A 2500 Speakerphone, 203A Analog or stand-alone 2500 Loudspeaker, 107 Automatic Dialer, 2870A1 MET Provides hands-free calling Provides hands-free answering. Provides hands-free calling when not used as stand-alone.
General Information switch, a data module must be inserted to provide compatibility. The data module provides the two-way data signal conversion and processing required between different protocols. Figure 2-3 shows a simplified diagram of the components of a typical data link. RS-232C/D Data Data V.35 Endpoint Module RS-449 Figure 2-3. DCP DEFINITY G1, G2, G3 System 75 or System 85 Digital Switch DCP Data Module Data RS-232C/D Endpoint V.
Data Modules stand-alone. Emulates a Hayes-compatible modem, therefore, can be used with standard PC communications packages. Takes the place of previous DCP asynchronous data stands. ■ 7400D Data Module — Works as a DCE device between a DTE and the PBX. A DTE configuration (that is, modem pooling) is not supported, and the DCE configuration is limited to an Answer-Only-type interface option. Dates rates range from 0.3 to 19.2 kbps.
General Information opposed to PCs. Connects to SN 238 (System 85 and DEFINITY G2 traditional modules) or TN726 (System 75 and DEFINITY G1 and G2 universal modules). ■ Multiple Asynchronous Data Unit (MADU) — Works with asynchronous DTE at data rates of 0.3-19.2 kbps in host applications. The MADU is rack-mounted and supports busy-out. It connects to the same switch ports as the ADU.
Data Terminals Data Terminals A data terminal is a workstation at which data is entered and retrieved; it communicates through lines, trunks, switches, and data modules with data endpoints such as computers and other data terminals. Some data terminals contain built-in voice capabilities similar to digital voice terminals. For detailed information on buttons, lights, and tones, refer to the general information about voice terminals at beginning of this section.
General Information Table 2-3.
Exposed Port Protection 3 All port packs and terminals require unique protection and grounding arrangements as defined in the checklists (System 75 Electrical Protection, Grounding, and Exposure Checklist, 555-200-120 and System 85 Electrical Protection, Grounding, and Exposure Checklist, 555-103-120). These arrangements provide an adequate barrier to the potentially damaging voltages and currents inherent in lightning and power surges present in exposed applications.
Exposed Port Protection Protection is required at both entrances for digital out-of-building voice terminals. There are two different types of protectors that can be used to protect digital voice terminals and digital line circuit packs in an out-of-building environment: the 4C3S-75 Enhanced Protector and the ITW Linx Enhanced Protector. NOTE: The 4C3S-75 Enhanced Protector may only be used on Vintage 14 or newer TN754 Circuit Packs. The 4C3S-75 can be used on all vintages of the TN754B Circuit Pack.
Exposed Port Protection Recommended Protectors and IROB Protection Table 3-1 shows the recommended protectors for the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, and System 85. Table 3-2 shows the in-range, out-ofbuilding (IROB) protection for DEFINITY line circuits and terminals. ! CAUTION: The following circuit pack and terminal arrangements are not allowed to be installed in an exposed environment: 1. 7300 Series connected to the TN762B or ANN17 Circuit Pack 2.
Exposed Port Protection Table 3-2. IROB Protection Circuit Packs Terminal Required Protector* SN224 7203, EP 7205, MET SN228B, 2500 Series, SN229 2500DMGC, P1 7100 Series P1 TN742, 500 Series, TN746B, 2500 Series, TN769 7100 Series SN270 7400 Series EP TN754 7400 Series (ITW)2 TN754, V14 7400 Series EP3 TN556 T. Term EP and P4 * Key to Abbreviations: P = Primary; EP = Enhanced Primary Notes: 1.
Adjunct Power 4 Power for several of the adjuncts must be provided locally at the voice terminal or from a satellite closet through the terminal wiring. The following power supplies are currently recommended: ■ The 1151A1 Power Unit and the 1151A2 Power Unit with Battery Holdover have replaced the MSP-1 (WP92464L1) Power Supply, the KS-22911 L1/2, 329A, and 353A DC power supplies, and the 2012D AC transformer.
Adjunct Power The distribution of power to the terminal equipment is provided by the 1146B distribution unit. The 1146B provides 32 standard 110 connections to the load with overcurrent protection and alarm lights. The 1145B1/1146B power arrangement is compact (measuring only 6.5 inches deep), lightweight, plastic enclosed, and designed for easy wall- or rack-mounting.
Information on the Older Power Supplies Information on the Older Power Supplies The following diagram (Figure 4-1) shows the connections with the older power supplies including the MSP-1. NOTE: The 1151A1 and 1151A2 replace the MSP-1, the KS-22911 L1/2, 329A, the 353A DC power supplies, and the 2012D AC transformer.
Adjunct Power The Power Supplies Prior to the MSP-1 Wall Local Power Supply: 2012D or 329A or KS-22911,L2 or KS-21239,L4/L5 or 353 or DS3081096 PS 400B2 Terminal Information Outlet PS To Vertical Trough KS-22911, 945, 329A, or 346A Power Supplies PS PS Terminal AC Power Strip Satellite Location Figure 4-1.
Information on the Older Power Supplies One of these power supplies must be used for each voice terminal equipped with one or more adjuncts. Each of these power supplies (except the 95B1) has a maximum cable distance of 250 feet (76 m) between the power supply and the adjunct(s). The maximum cable distance for the 95B1 is 150 feet (45m).
Adjunct Power NOTE: One power supply will support one telephone with or without an adjunct. The maximum loop range between the telephone and the power supply is 250 feet. This power supply replaces the KS-22911-L1/2, 329A, and 353A DC Power Supplies and the 2012D AC Transformer. The MSP-1 power supply has a single output of -48 volt DC, 0.4 amperes, and can operate from either a 120 VAC 60 Hz power source (105 to 129 VAC) or a 220/230/240 50 Hz power source (198 to 264 VAC).
Information on the Older Power Supplies ■ Figure 4-2 shows the local powering arrangement for: ISDN voice terminals; the DCP 7444 and 8434DX voice terminals’ VF displays; and adjuncts connected to all telephones except the 8102. ■ Figure 4-3 shows the local powering arrangement for adjuncts connected to the 8102 telephone. NOTE: The type of cord(s) needed to make these connections are designated in each drawing.
Adjunct Power PHONE OTHER -7 +8 -2 +5 D4BU cord LINE MSP-1 Power Supply Adjunct jack (on the rear of telephone) Power jack Line jack D4BU cord or 2–wire cord Wall Jack Bottom view of the 8102 telephone Figure 4-3. Local Powering Arrangement (Using the MSP-1) for Adjuncts Connected to the 8102 Analog Telephone The 1151A1 and 1151A2 Power Units The 1151A1 power supply is a single output 48 volt DC, 20 watt power supply.
The 1151A1 and 1151A2 Power Units type of input voltage. When AC power fails, the battery will provide 15 minutes of holdover at full load (20 watts) or 8 hours at light load (2 watts). The 1151A1 and 1151A2 power supplies can be used to supply local power to ISDN-T 65xx, 75xx, and 85xx series voice terminals connected to a DEFINITY Communications System G1, G2, and G3, a DEFINITY ECS, and to the DCP 7444 and 8434/8434DX voice terminals which need auxiliary power for their vacuum fluorescent displays.
Adjunct Power Connecting the Power Supply The power output is provided through 1 modular jack on the power supply. These jacks are labeled, from left to right: Phone Line -7 +8 The - and + numbers under “PHONE” refer to the pins on which power is present and the polarity of that power. The PHONE and LINE jacks are 8-pin female non-keyed 657-type jacks that can accept D4, D6, and D8 modular plug cables.
The 1151A1 and 1151A2 Power Units POWER ON PHONE -7 +8 Wall jack LINE 1151A1/2 Power Unit W/Battery Holdover CHARGING LINE ! EX MOD Line jack Adjunct jack Figure 4-4.
Adjunct Power 4-12 Issue 11 December 1999
Administration 5 This section contains some of the information necessary to administer the different voice terminals connected to a DEFINITY Communications System Generic 1, Generic 2, and Generic 3, a DEFINITY Enterprise Communications Server (ECS), and to a System 75, or System 85. It also provides the caveats required when administering some of the newer voice terminals to the older systems.
Administration Aliasing When some of the newer voice terminals are used with some older versions of the switches, the administration procedures of the switch does not allow for the use of the new terminals. These new terminals must be administered using the administration procedures of a similar older terminal. This is called “aliasing” a set.
Aliasing Table 5-1. DEFINITY G1 and G3, DEFINITY ECS, and System 75 Voice Terminal Administration System Voice Terminal S75 R1V1 S75 R1V2 8101/8102/8110 G1 and G3 2500 with Message Waiting 6201 2500 6210/6220/6230 2500 with Message Waiting 6402, 6402D, 6408, 6408+, 6408D, 6408D+, 6416D+, 6424D+ X 7102A Administered as itself on DEFINITY ECS Release 6.
Administration Table 5-1.
Aliasing Table 5-1.
Administration Table 5-2.
Aliasing Table 5-3.
Administration Table 5-3.
Aliasing Table 5-3.
Administration Table 5-4.
Button and Feature Caveats Button and Feature Caveats System 75, DEFINITY G1 and G3, and DEFINITY ECS Table 5-5.
Administration System 85 and DEFINITY G2 Table 5-6.
Voice Terminal Features 6 The voice terminals connected to the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY Enterprise Communications Server (ECS), System 75, and System 85 provide a wide range of features. The following tables provide information on the major features of a particular type of telephone or voice terminal.
Voice Terminal Features Table 6-1.
Voice Terminal Features Table 6-2.
Voice Terminal Features Table 6-3.
Voice Terminal Features Table 6-4. Single-Line and 7401 Voice Terminal Features (7101A through the 7104A Voice Terminals) Voice Terminals 7101A 7102A 7102 Plus 7103A Fixed 7103A Prog.
Voice Terminal Features Table 6-5.
Voice Terminal Features Table 6-6.
Voice Terminal Features Table 6-7.
Voice Terminal Features Table 6-8.
Voice Terminal Features Table 6-8.
Voice Terminal Features Table 6-9.
Voice Terminal Features Table 6-9.
Voice Terminal Features Table 6-10.
Voice Terminal Features Table 6-10.
Voice Terminal Features . Table 6-11.
Voice Terminal Features Table 6-12.
The 6400 Series Telephones 7 The following 6400 Series Telephones are described in this section: ■ 6402 and 6402D telephones ■ 6408+ and 6408D+ telephones ■ 6416D+ and 6416D+M telephone ■ 6424D+ and 6424D+M telephone Issue 11 December 1999 7-1
The 6400 Series Telephones The 6402 and 6402D Telephones Handset Tel # Feature button Speaker button Redial button Speaker Feature Hold Redial Transfer Conf Test Ring ABC DEF GHI JKL MNO 4 5 6 PQRS TUV 7 8 WXYZ * O 1 2 Volume 3 Hold button Transfer/Test button Conference/ Ring button Dial pad 9 # Volume Control button Message Light Tray handle for quick reference cards Figure 7-1.
The 6402 and 6402D Telephones 2-line by 16-character display Handset Tel # Feature button Speaker button Redial button Speaker Feature Hold Redial Transfer Conf Test Ring ABC DEF GHI JKL MNO 4 5 6 PQRS TUV 7 8 WXYZ * O 1 2 Volume 3 Hold button Transfer/Test button Conference/ Ring button Dial pad 9 # Volume Control button Message Light Tray handle for quick reference cards Figure 7-2.
The 6400 Series Telephones Applications The 6402 telephones can best be used with the DEFINITY Enterprise Communications Server (ECS) Release 6.1 and later. This telephone is especially suitable for general office workers with low call volumes, manufacturing, warehousing, guard and/or reception areas, or office desks. Physical Features Dimensions NOTE: The dimensions described here for the 6402 and 6402D telephones are approximate. Width = 7 inches (17.78 cm) Depth (front to back) = 8.5 inches (21.
The 6402 and 6402D Telephones The user has access to a Feature card among the cards in the tray located under the base of the telephone on which the system manager or the user can write the features administered on each of the dial pad keys. HOLD Button The red HOLD button can be used to put a call on hold. When a call is on hold, the red light associated with the HOLD button flashes. REDIAL Button The REDIAL button is used to redial the last number the user dialed from the dial pad.
The 6400 Series Telephones Other Physical Features Pull-out tray Five quick reference cards are provided in the tray located under the base of every 6400 Series telephone. Handset The 6402 and 6402D telephones are equipped with an AJ2A handset. Dial pad These telephones are equipped with a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users.
The 6402 and 6402D Telephones Wiring Information The 6402 and 6402D telephones work in ONLY a 2-wire DCP configuration. The table below describes the pins on a 6400-Series telephone LINE jack. Table 7-1.
The 6400 Series Telephones REMOVE ALL CONNECTIONS BETWEEN PAIRS BEFORE CONNECTING THE TELEPHONE. Appropriate Circuit Packs and Distance Limitations The 6400 Series telephones can only be connected in a 2-wire mode behind the TN2181 and the TN2224 digital circuit packs. In 2-wire operation, the telephone must be within 5,500 feet of the PBX using 22-gauge wire, within 3,500 feet of the PBX using 24-gauge wire, and within 2,200 feet of the PBX using 26-gauge wire.
The 6402 and 6402D Telephones Tel # Speaker Feature Hold Redial Transfer Conf Test DEF GHI JKL MNO 4 5 6 PQRS TUV 7 8 WXYZ * O 1 Administer the features programmed on the dial pad as “FEATURE BUTTON ASSIGNMENTS” 1 through 12. Ring ABC 2 3 9 # Volume Figure 7-3. Button Numbering for Administering the 6402 and 6402D Telephone Connected to a DEFINITY System Release 6.
The 6400 Series Telephones Hearing Aid Compatible The 6400 Series telephones are compatible with the inductively coupled hearing aids approved by the FCC.
The 6402 and 6402D Telephones Adjuncts The 6400 Series telephones do NOT have an Adjunct jack and therefore will not support any adjunct equipment. NOTE: The Headsets mentioned below are plugged into the Handset jack. Headsets A list of compatible headsets, consisting of both modular and plug prong base units and selection of headpieces, appears in “Headset Adapters” in the Adjuncts section later in this manual.
The 6400 Series Telephones The 6408+ and 6408D+ Telephones Mute button Speaker button Transfer/Test button Redial button Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF GHI JKL MNO 4 5 6 PQRS TUV 7 8 WXYZ * O 1 Conference/Ring button 2 Hold button 3 8 call appearance/ feature buttons Dial pad Volume control button Volume 9 # Message Light Tray handle for quick reference card Figure 7-4.
The 6408+ and 6408D+ Telephones 2-line by 24-character display Mute button Menu Exit Prev Speaker button Transfer/Test button Redial button Conference/Ring button Next Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF GHI JKL MNO 4 5 6 PQRS TUV 8 WXYZ 7 * O 1 2 Softkeys Display control buttons Hold button 3 8 call appearance/ feature buttons Dial pad Volume control button 9 # Message Light Volume Tray handle for quick reference card Figure 7-5.
The 6400 Series Telephones Those users who have a 6408D+ (the 6408 telephone with display) can access 12 features with the softkeys and display control buttons. These 12 features can be used in addition to the features on the call appearance/feature buttons. NOTE: The 6408 telephones can work ONLY in a 2-wire environment. For more information, see “Wiring Information.” Applications Both 6408 telephones have been developed to be used with the DEFINITY ECS Release 6.1 and later.
The 6408+ and 6408D+ Telephones Speakerphone The 6408+ and the 6408D+ telephones are equipped with a built-in 2-way speakerphone. (The telephone can be optioned for a 1-way, listen-only speaker instead. The system manager should have records of how this feature is optioned.) The Speakerphone capability allows a user to engage in a hands-free conversation with the far-end party.
The 6400 Series Telephones Call Appearance/Feature Buttons Both 6408 telephones have eight call appearance/feature buttons, each equipped with a red and a green light. Usually, at least two of these buttons are administered as call appearances for the telephone’s primary extension number, where calls are placed and answered. The remainder of the buttons can be used for more call appearances (including bridged appearances of other stations’ extensions) and features.
The 6408+ and 6408D+ Telephones Below is a list of the 12 default softkey features assigned to the 6408D+ and the order in which they appear. Table 7-2.
The 6400 Series Telephones Table 7-3. Alternate Softkey Features on the 6408D+ Connected to a DEFINITY ECS Release 6.
The 6408+ and 6408D+ Telephones Other Physical Features Pull-out tray Five quick reference cards are provided in the tray located under the base of every 6400 Series telephone. Handset Both 6408 telephones are equipped with an AJ2A handset. Dial pad Both 6408 telephones have a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users.
The 6400 Series Telephones Wiring Information Both 6408 telephones work in a 2-wire DCP configuration ONLY. The table below describes the pins on a 6400-Series telephone LINE jack. Table 7-4.
The 6408+ and 6408D+ Telephones REMOVE ALL CONNECTIONS BETWEEN PAIRS BEFORE CONNECTING THE TELEPHONE. Appropriate Circuit Packs and Distance Limitations The 6400 Series telephones can only be connected in a 2-wire mode behind the TN2181 and the TN2224 digital circuit packs. In 2-wire operation, the telephone must be within 5,500 feet of the PBX using 22-gauge wire, within 3,500 feet of the PBX using 24-gauge wire, and within 2,200 feet of the PBX using 26-gauge wire.
The 6400 Series Telephones Administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. Menu Exit Prev Next Tel # Speaker Mute Hold Redial Transfer Conf Test Ring 1 2 ABC DEF 2 3 GHI JKL MNO 4 5 6 5 TUV WXYZ 6 1 PQRS 7 8 * O 9 3 4 7 # 8 Volume The 8 call appearance/ feature buttons are administered as “BUTTON ASSIGNMENTS” 1 through 8. Figure 7-6. Button Numbering for Administering the 6408 Telephones Connected to a DEFINITY System Release 6.
The 6408+ and 6408D+ Telephones UL and CSA Approval The 6400 Series telephones have been tested and have met the Underwriters Laboratories (UL) Standards UL 1459 and have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90. Hearing Aid Compatible All 6400 Series telephones are compatible with the inductively coupled hearing aids approved by the FCC.
The 6400 Series Telephones Comcode: 847770666; Laser Sheet For 100 Sets PEC: 32311A Comcode: 847770674 Adjuncts The 6408 telephones do NOT have an Adjunct jack on the bottom of the telephone. Therefore, adjunct equipment cannot be used with these telephones. NOTE: The Headsets mentioned below are plugged into the Handset jack.
The 6416D+ and 6416D+M Telephones The 6416D+ and 6416D+M Telephones Display Softkeys Display control buttons Hold button Mute button Menu Exit Prev Speaker button Tel # Speaker Mute Hold Redial Transfer Conf Next Tel # Transfer/Test button Redial button Conference/Ring button Test Ring ABC DEF GHI JKL MNO 4 5 6 PQRS TUV 7 8 WXYZ * O 1 2 3 16 Call appearance/ feature buttons Dial pad Volume control button 9 # Volume Message light Tray handle Figure 7-7.
The 6400 Series Telephones With the 6416D+ and 6416D+M telephones you can access 12 features with the softkeys and display control buttons. These 12 features can be used in addition to the features on the call appearance/feature buttons. NOTE: The 6416D+ and 6416D+M telephones can work ONLY in a 2-wire environment. For more information, see “Wiring Information.” An XM24 expansion module can be connected to any 6416D+ and 6416D+M telephone to expand the number of buttons you can use.
The 6416D+ and 6416D+M Telephones Applications for the Modular 6416D+M Telephone Only If the Modular 6416D+M telephone is being used with a DEFINITY switch, the manner in which the telephone and the analog adjunct interact depends on the switch release to which your telephone is connected. (Your system manager can give you more information about the switch release.) ■ On DEFINITY releases prior to Release 8.1, going back to Release 6.1, the analog adjunct shares the telephone line with the telephone.
The 6400 Series Telephones Speaker (Listen-Only) Feature The 6416D+ and 6416D+M telephones have a two-way speakerphone; however, the telephones can also be optioned instead for a 1-way, listen-only speaker. If this is the case, use the SPEAKER button on the front of the telephone for turning on and off the speaker. The Speaker (listen-only) capability allows a user to engage in a 1-way conversation with the far-end. Specifically, the user can only listen to the far-end.
The 6416D+ and 6416D+M Telephones Call Appearance/Feature Buttons The 6416D+ and 6416D+M telephones have 16 call appearance/feature buttons, each equipped with a red and a green light. Usually, at least two of these buttons are administered as call appearances for the telephone’s primary extension number, where calls are placed and answered. The remainder of the buttons can be used for more call appearances (including bridged appearances of other stations’ extensions) and features.
The 6400 Series Telephones Below is a list of the 12 default softkey features assigned to the 6416D+ and 6416D+M telephones and the order in which they appear. Table 7-5.
The 6416D+ and 6416D+M Telephones Table 7-6. Alternate Softkey Features on the 6416D+ and 6416D+M Connected to a DEFINITY ECS Release 6.
The 6400 Series Telephones Other Physical Features Pull-out tray Five quick reference cards are provided in the tray located under the base of every 6400 Series telephone. Handset The 6416D+ and 6416D+M telephones are equipped with an AJ2A handset which can accept either a handset or a headset. Dial pad The 6416D+ and 6416D+M telephones are equipped with a 12-button touch-tone dial pad.
The 6416D+ and 6416D+M Telephones Ringing The 6416D+ and 6416D+M telephones have electronic tone ringing with eight possible ringing patterns which you can select by pressing the CONF button while on-hook. The loudness of the tone ringer can be controlled by the VOLUME “arrow” button. (The user must NOT be on a speakerphone call. If the user is using the speakerphone, the VOLUME “arrow” button controls the volume of the speakerphone.
The 6400 Series Telephones A D8W modular cord MUST be used for all 2-wire installations requiring auxiliary power. If using an auxiliary power supply such as a Lucent Technologies 1151A, it is acceptable to have a D2R cord connected from the wall jack to the LINE jack found on the power supply.
The 6416D+ and 6416D+M Telephones Administration The 6416D+ and 6416D+M telephones can be administered as themselves on a DEFINITY system starting with Release 6.1 software. These telephones will NOT work with any DEFINITY switch release prior to Release 6.1. Button Numbering The following button diagrams of the 6416D+ and 6416D+M telephone will help you administer these telephones connected to a DEFINITY ECS Release 6.1 or later.
The 6400 Series Telephones Administering the Analog Adjunct on the Modular 6416D+M Telephone As noted above, all 6416D+ and 6416D+M can be administered as themselves ONLY IF they are connected to a DEFINITY ECS Release 6.1 (or later). In Native Mode the Modular 6416D+M telephone is administered through a digital line circuit card with a line number (with the usual three call appearances) assigned to the I-1 Channel. If the Modular 6416D+M is connected to a DEFINITY ECS Release 8.
The 6416D+ and 6416D+M Telephones 6416D+ and 6416D+M Telephones and Equipment PECs and Comcodes The 6416D+ and 6416D+M telephones and components can be ordered with these PECs and Comcodes: ■ 6416D+ (6416D01A) telephone Gray 6416D+ Set PEC: 3306-16G Comcode: 108019951; White 6416D Set PEC: 3306-16W Comcode: 108019845 ■ Modular Class B 6416D+M (6416D02A) telephone Gray 6416D+M Set PEC: 3306-6MG Comcode: 108020256; White 6416D+M Set PEC: 3306-6MW Comcode: 108020157 ■ AJ2A Handset Comcode: Gray=220035018
The 6400 Series Telephones ■ XM24 Expansion Module (for the non-modular 6416D+ and 6424D+) Gray XM24 = PEC: 33076/A, Comcode: 108023243 White XM24 = PEC: 33074/A, Comcode: 108023235 ■ XM24 Expansion Module (with a new base angle for the 6416D+M, 6424D+M, and CALLMASTER V) Gray XM24 = PEC: 33071/A, Comcode: 108544511 White XM24 = PEC: 33072/A, Comcode: 108554503 Adjuncts The Modular 6416D+M telephones, with the connected 100A Tip/Ring module in the desktop stand, allow connection with such analog adjunc
The 6424D+ and 6424D+M Telephone The 6424D+ and 6424D+M Telephone Display control buttons 2-line by 24-character display Softkeys Handset Hold button Menu Mute button Exit Prev Next Tel # Speaker button Redial button Speaker Redial Mute Hold Transfer Conf Test DEF GHI JKL MNO 4 5 6 1 Transfer/ Test button Ring ABC 2 PQRS TUV 7 8 * O 3 WXYZ 9 # Volume Message Light Conference/ Ring button Dial pad Volume Control button Figure 7-9.
The 6400 Series Telephones a red HOLD button, REDIAL button, TRANSFER/TEST button for transferring a call or testing the lights and display on the telephone, and a CONF/RING button for setting up a conference call and for selecting a personalized ringing pattern. These telephones also have a red Message light and a Volume control button. With the 6424D+ and 6424D+M telephones you can access 12 features with the softkeys and display control buttons.
The 6424D+ and 6424D+M Telephone Applications for the Modular 6424D+M Telephones Only If the Modular 6424D+M telephone is being used with a DEFINITY switch, the manner in which the telephone and the analog adjunct interact depends on the switch release to which your telephone is connected. (Your system manager can give you more information about the switch release.) ■ On DEFINITY Enterprise Communications Server (ECS) releases prior to Release 8.1, going back to Release 6.
The 6400 Series Telephones Speaker (Listen-Only) Feature The 6424D+ and 6424D+M telephones have a two-way speakerphone; however, these telephones can also be optioned instead for a 1-way, listen-only speaker. If this is the case, use the SPEAKER button on the front of the telephone for turning on and off the speaker. The Speaker (listen-only) capability allows a user to engage in a 1-way conversation with the far-end. Specifically, the user can only listen to the far-end.
The 6424D+ and 6424D+M Telephone Call Appearance/Feature Buttons The 6424D+ and 6424D+M telephones have 24 call appearance/feature buttons, each equipped with a red and a green light. Usually, at least two of these buttons are administered as call appearances for the telephone’s primary extension number, where calls are placed and answered. The remainder of the buttons can be used for more call appearances (including bridged appearances of other stations’ extensions) and features.
The 6400 Series Telephones Below is a list of the 12 default softkey features assigned to the 6424D+ and 6424D+M telephones and the order in which they appear. Table 7-8.
The 6424D+ and 6424D+M Telephone Table 7-9. Alternate Softkey Features on the 6424D+ and 6424D+M Connected to a DEFINITY ECS Release 6.
The 6400 Series Telephones Other Physical Features Pull-out tray Five quick reference cards are provided in the tray located under the base of every 6400 Series telephone. Handset The 6424D+ and 6424D+M telephones are equipped with an AJ2A handset which can accept either a handset or a headset. Dial pad The 6424D+ and 6424D+M telephones are equipped with a 12-button touch-tone dial pad.
The 6424D+ and 6424D+M Telephone Ringing The 6424D+ and 6424D+M telephones have electronic tone ringing with eight possible ringing patterns which you can select by pressing the CONF button while on-hook. The loudness of the tone ringer can be controlled by the VOLUME “arrow” button. (The user must NOT be on a speakerphone call. If the user is using the speakerphone, the VOLUME “arrow” button controls the volume of the speakerphone.
The 6400 Series Telephones is acceptable to have a D2R cord connected from the wall jack to the LINE jack found on the power supply. For 2-wire operation, if you need to plug the telephone into a 4-pin or 6-pin wall jack, instead of a standard 8-pin modular jack, refer to the “Line Interface” table above to insure that the wires from the 4-pin or 6-pin wall jack are connected to the correct pins on the telephone “LINE” jack.
The 6424D+ and 6424D+M Telephone Button Numbering The following button diagrams of the 6424D+ and 6424D+M telephones will help you administer the 6424D+ and 6424D+M telephone connected to a DEFINITY system Release 6.1 or later. If you need more information, refer to DEFINITY Communications System Generic 3 Implementation, 555-230-653. Administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12.
The 6400 Series Telephones Administering the Analog Adjunct on the Modular 6424D+M Telephone As noted above, all 6424D+ and 6424D+M telephones can be administered as themselves ONLY IF they are connected to a DEFINITY ECS Release 6.1 (or later). In Native Mode the Modular 6424D+M telephone is administered through a digital line circuit card with a line number (with the usual three call appearances) assigned to the I-1 Channel. If the Modular 6424D+M is connected to a DEFINITY ECS Release 8.
The 6424D+ and 6424D+M Telephone 6424D+ and 6424D+M Equipment PECs and Comcodes The 6424D+ and 6424D+M telephones and components can be ordered with these PECs and Comcodes: ■ 6424D+ (6424D01A) telephone Gray 6424D+ Set PEC: 3307-24G Comcode: 108020553; White 6424D+ Set PEC: 3307-24W Comcode: 108020454 ■ Modular Class B 6424D+M (6424D02A) telephone Gray 6424D+M Set PEC: 3307-4MG Comcode: 108331240; White 6424D+M Set PEC: 3307-4MW Comcode: 108331257 ■ AJ2A Handset Comcode: Gray=220035018; White=2200350
The 6400 Series Telephones ■ XM24 Expansion Module (for the non-modular 6416D+ and 6424D+) Gray XM24 = PEC: 33076/A, Comcode: 108023243 White XM24 = PEC: 33074/A, Comcode: 108023235 ■ XM24 Expansion Module (with a new base angle for the 6416D+M, 6424D+M, and CALLMASTER V) Gray XM24 = PEC: 33071/A, Comcode: 108544511 White XM24 = PEC: 33072/A, Comcode: 108554503 Adjuncts The Modular 6424D+M telephones, with the connected 100A Tip/Ring module in the desktop stand, allow connection with such analog adjunc
The 7100 Series Voice Terminals 8 The following section describes these 7100 Series voice terminals: ■ 7101A voice terminal ■ 7102A and 7102 Plus voice terminals ■ 7103A Fixed Feature voice terminal ■ 7103A Programmable voice terminal ■ 7104A voice terminal Issue 11 December 1999 8-1
The 7100 Series Voice Terminals The 7101A Voice Terminal ABC DEF 2 3 GHI JKL MNO 4 5 6 PRS TUV WXY 7 8 9 1 Handset * Recall Button Volume Control Recall Oper O Dial Pad # Disconnect Disconnect Button Hi Lo Msg Message Light Figure 8-1. The 7101A Voice Terminal The 7101A voice terminal is a single-line analog model that requires one tip and ring pair for operation. It is equipped with a Message Waiting light and a RECALL button for activating the system’s special features.
The 7101A Voice Terminal Applications The 7101A terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. This voice terminal is especially suitable for manufacturing, warehousing, guard and/or reception areas, or office desks where multiple line appearances or one touch access to special features is not required. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7100 Series Voice Terminals Jacks The 7101A housing contains two jacks. The handset cord jack is just under the left front edge of the housing. (The handset contains a jack for the other end of the handset cord.) The line jack is on the bottom center of the housing. Cords Two cords are supplied with the 7101A terminal: a coiled 7-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, and 14-foot and 25-foot line cords.
The 7101A Voice Terminal Distance Limitations The maximum allowable distances of a 7101A from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 8-1.
The 7100 Series Voice Terminals Hearing Aid Compatible The 7101A voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7102A and 7102 Plus Voice Terminals The 7102A and 7102 Plus Voice Terminals Access Codes Card Ringer Volume Control (on left side) Handset 1 GHI ABC DEF 2 3 JKL MNO 4 5 6 PRS TUV WXY 8 9 7 * Oper O Message Dial Pad # Recall Recall Button Message Light Figure 8-2. The 7102A and 7102 Plus Voice Terminals The 7102A voice terminal is available in two versions, the 7102A01A and the 710201B, called the 7102 Plus. The front of the two sets is exactly the same in appearance.
The 7100 Series Voice Terminals The 7102A and the 7102 Plus voice terminals are single-line analog models that require one tip and ring pair for operation. It allows access to system features via the RECALL Button and dial codes. The 7102A and 7102 Plus voice terminal faceplate contains a Feature Access Code Card that can be customized to reflect the most frequently accessed features. NOTE: Both of the 7102 voice terminals have been discontinued.
The 7102A and 7102 Plus Voice Terminals Other Physical Features Handset The 7102 voice terminals are equipped with an R-type handset. Dial Pad The 7102 voice terminals have a 12-button touch-tone dial pad. Jacks The 7102A01A housing contains two jacks. The handset cord jack is just under the center front edge of the housing. (The handset contains a jack for the other end of the handset cord.) The line jack is on the bottom center of the housing. The 7102 Plus housing contains three jacks.
The 7100 Series Voice Terminals Distance Limitations The maximum allowable distances of a 7102A or 7102 Plus voice terminal from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 8-2.
The 7102A and 7102 Plus Voice Terminals Hearing Aid Compatible This voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7100 Series Voice Terminals The 7103A Fixed Feature Voice Terminal Handset 8 Feature Buttons 1 4 MNO 8 O Recall Message Light WXY Dial Pad 9 OPER * 3 6 TUV 7 Figure 8-3. JKL 5 PRS Message DEF 2 GHI Volume Control (on left side) ABC # Disconnect Disconnect Button Recall Button The 7103A Fixed Feature Voice Terminal The 7103A Fixed Feature voice terminal is a single-line analog model The feature buttons on this terminal must be programmed by the system manager.
The 7103A Fixed Feature Voice Terminal Applications The 7103A Fixed Feature voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. This voice terminal is especially suitable for groups of office workers who make frequent calls to the same destinations or use the same features. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7100 Series Voice Terminals Dial pad The 7103A Fixed Feature voice terminal has a 12-button touch-tone dial pad. Jacks The 7103A Fixed Feature voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing. (The handset contains a jack for the other side of the handset cord.) The LINE and OTHER jacks are on the bottom center of the housing.
The 7103A Fixed Feature Voice Terminal Distance Limitations The maximum allowable distances of a 7103A Fixed Feature voice terminal from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 8-3.
The 7100 Series Voice Terminals Hearing Aid Compatible The 7103 Fixed Feature voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7103A Programmable Voice Terminal The 7103A Programmable Voice Terminal Handset 10 Feature Buttons Last Number/Wait Program 1 4 MNO 8 O Recall Message Light Dial Pad WXY 9 OPER * 3 6 TUV 7 Figure 8-4. JKL 5 PRS Message DEF 2 GHI Volume Control (on left side) ABC Last Number/ Wait Button Program Button # Disconnect Disconnect Button Recall Button The 7103A Programmable Voice Terminal The 7103 Programmable voice terminal is a single-line analog model.
The 7100 Series Voice Terminals Applications The 7103A Programmable voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. This voice terminal is especially suitable for groups of office workers who make frequent calls to the same destinations or use the same features. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7103A Programmable Voice Terminal Message Light The green Message light goes on when a message is left for the user. It goes off when the user retrieves the message. Other Physical Features Handset The 7103A Programmable voice terminal is equipped with an R-type handset. Dial pad The 7103A Programmable voice terminal has a 12-button touch-tone dial pad. Jacks The 7103A Programmable voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing.
The 7100 Series Voice Terminals Distance Limitations The maximum allowable distances of a 7103A Programmable voice terminal from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 8-4.
The 7103A Programmable Voice Terminal Hearing Aid Compatible The 7103A Programmable voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7100 Series Voice Terminals The 7104A Voice Terminal Display Handset 9 One-Touch Dial Buttons Recall ABC DEF GHI JKL MNO 4 5 1 PRS 7 Disconnect * 2 TUV 8 OPER O Feature Control Buttons Recall Button 3 6 Dial Pad WXY 9 # Speaker Speaker Button Disconnect Button Speaker Volume Control Instruction Card Figure 8-5.
The 7104A Voice Terminal Display Message Waiting Light Handset 9 One-Touch Dial Buttons Feature Control Buttons Recall ABC DEF GHI JKL MNO 4 5 1 PRS 7 Disconnect * 2 TUV 8 OPER O Message Waiting Adjunct 3 Recall Button 6 Dial Pad WXY 9 # Speaker Speaker Button Disconnect Button Speaker Volume Control Figure 8-6. The 7104A Voice Terminal with Attached Message Waiting Adjunct The 7104A voice terminal is a single-line analog model.
The 7100 Series Voice Terminals Applications The 7104A voice terminal can be used with the DEFINITY Communications System Generic 1 and Generic 3, the DEFINITY ECS, and System 75. This voice terminal is especially suitable for managers, office support personnel, and others. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7104A Voice Terminal ■ SAVE/SEND button — used to save a dialed number, then call it again ■ PROGRAM button — used in recording numbers for one-touch dialing ■ DISPLAY button — used to display stored numbers ■ SPACE, PAUSE, and STOP buttons — used in recording numbers for one-touch dialing Eight dual function buttons These buttons are divided into gray and blue halves and can be programmed for one-touch dialing of sixteen frequently called numbers and/or system features.
The 7100 Series Voice Terminals Cords Two cords are supplied with the 7104A voice terminal: a coiled 7-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, and14-foot and 25-foot line cords. Ringing The 7104A voice terminal has electronic tone personalized ringing. The personalized ringing is controlled by a ring switch under the rear end cap of the voice terminal. The volume control is on the left side of the housing.
The 7104A Voice Terminal FCC Registration The 7104A voice terminal is not FCC registered. Hearing Aid Compatible The 7104A voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7100 Series Voice Terminals 8-28 Issue 11 December 1999
The 7200 Series Voice Terminals 9 This section describes the following 7200 Series voice terminals: ■ 7203H voice terminal ■ 7205H voice terminal Issue 11 December 1999 9-1
The 7200 Series Voice Terminals The 7203H Voice Terminal Handset Call Appearance/ Feature Buttons Conference Transfer Drop Hold 1 4 MNO 7 8 O Recall WXY Dial Pad 9 OPER * Hold Button Drop Button 3 6 TUV Message Light Figure 9-1.
The 7203H Voice Terminal Applications The 7203H voice terminal can be used with System 85 and the DEFINITY Communications System Generic 2. However, on a DEFINITY G2, this voice terminal can only be used on a traditional module and the SN224 circuit pack. The 7203H voice terminal is suitable for managers, executive secretaries, office support personnel, and others who do not need data capabilities. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7200 Series Voice Terminals Other Physical Features Handset The 7203H voice terminal is equipped with an R-type handset. Dial pad The 7203H voice terminal has a 12-button touch-tone dial pad. Jacks The 7203H voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing. (The handset contains a jack for the other end of the handset cord.) The line jack is on the bottom center of the housing.
The 7203H Voice Terminal Distance Limitations The maximum allowable distances of a 7203H voice terminal from the DEFINITY G2 and System 85 cabinet are shown in the following table. Table 9-1. Distance Limitations for the 7203H Voice Terminal Nominal Maximum Range in Feet (Meters) System Port Board 24 AWG 26 AWG DEFINITY G2 and System 85 SN224 3,000 (914) 2,300 (700) Power Requirements The 7203H voice terminal is powered by the tip and ring leads.
The 7200 Series Voice Terminals Adjuncts One of the following adjuncts can be used with this voice terminal: ■ S101A Speakerphone ■ S201A Speakerphone ■ 500A Headset Adapter and a standard headset Additional Documents The following documents contain additional information relating to the 7203H voice terminal: ■ System 85 7203H Voice Terminal User’s Guide, 555-102-709 ■ DEFINITY Generic 1 and Generic 2, System 75, and System 85 Terminals and Adjuncts Installation and Test, 555-015-104 9-6 Issue 11
The 7205H Voice Terminal The 7205H Voice Terminal 10 Call Appearance/ Feature Buttons 24 Feature Buttons Handset Transfer Button Conference Button Drop Button Hold Button Conference Drop Hold 1 GHI 4 PRS 7 Volume Control (on left side) * Message Recall Message Light Recall Button Figure 9-2.
The 7200 Series Voice Terminals Applications The 7205H voice terminal can be used with System 85 and the DEFINITY Communications System Generic 2. However, on a DEFINITY G2, this voice terminal can only be used on a traditional module and the SN224 circuit pack. This voice terminal is suitable for managers, executive secretaries, office support personnel, and others who do not need data capabilities. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7205H Voice Terminal Feature-Only Buttons The 7205H voice terminal has 24 feature-only buttons. Other Physical Features Handset The 7205H voice terminal is equipped with an R-type handset. Dial pad The 7205H voice terminal has a 12-button touch-tone dial pad. Jacks The 7205H voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing. (The handset contains a jack for the other end of the handset cord.
The 7200 Series Voice Terminals Distance Limitations The maximum allowable distances of a 7205H voice terminal from the System 85 and the DEFINITY G2 cabinet are shown in the following table. Table 9-2.
The 7205H Voice Terminal 7205H Equipment PECs The 7205H voice terminal and optional components were ordered with the following PECs: ■ Basic 7205H Voice Terminal — 3183-40H/CLR ■ Handset cord (12 feet) — 2725-01L COL09 ■ Line cord (14 feet, silver) — 2725-07N COL18 ■ Line cord (25 feet, silver) — 2725-07S COL18 Adjuncts The following adjuncts can be used with this voice terminal: ■ S101A Speakerphone or 500A Headset Adapter and a standard headset ■ C201A Call Coverage Module ■ F201A Function K
The 7200 Series Voice Terminals 9-12 Issue 11 December 1999
The 7300 Series Voice Terminals 10 This section describes the following 7300 Series voice terminals: ■ 7303S voice terminal ■ 7305S voice terminal Issue 11 December 1999 10-1
The 7300 Series Voice Terminals The 7303S Voice Terminal Handset Call Appearance/ Feature Buttons Self-Test Switch (on left side of base) Conference Button Conference Transfer Transfer Button Drop Hold Hold Button Drop Button 1 GHI 4 PRS 7 Volume Control (on left side) * Message Recall Message Light ABC DEF JKL MNO 2 5 TUV 8 OPER O 3 6 WXY Dial Pad 9 # Speaker Speaker Button Speaker Light Recall Button Figure 10-1.
The 7303S Voice Terminal Applications The 7303S voice terminal can be used with the DEFINITY Communications System Generic 1,Generic 2, and Generic 3, the DEFINITY ECS, System 75 and System 85 (R2 only). This voice terminal is suitable for managers, executive secretaries, office support personnel, and others who do not need data capabilities. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7300 Series Voice Terminals Self Test The 7303S voice terminal is equipped with a self-test for its buttons and tone ringer. The self-test switch is located on the left side of the base. Loudspeaker The 7303S voice terminal has a built-in listen only loudspeaker. The volume control for the speaker is the same control used for the tone ringer volume. It is located on the left side of the housing. Other Physical Features Handset The 7303S voice terminal is equipped with an R-type handset.
The 7303S Voice Terminal Distance Limitations The maximum allowable distances of a 7303S voice terminal from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 10-1.
The 7300 Series Voice Terminals Hearing Aid Compatible The 7303S voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7305S Voice Terminal The 7305S Voice Terminal 10 Call Appearance/ Feature Buttons 24 Feature Buttons Self-Test Switch (on left side of base) Transfer Button Conference Button Conference Transfer Drop Drop Button Hold Button Hold 1 Handset GHI ABC DEF JKL MNO 2 4 PRS 7 Volume Control (on left side) * Message 5 TUV 8 Oper Recall Message Light Recall Button O 3 6 WXY 9 # Speaker Speaker Button Speaker Light Dial Pad Figure 10-2.
The 7300 Series Voice Terminals Applications The 7305S voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85 (R2V2 or higher). This voice terminal is suitable for managers, executive secretaries, office support personnel, sales support people, and others who do not need data capabilities. Physical Description Dimensions NOTE: The following dimensions are approximate.
The 7305S Voice Terminal Feature-Only Buttons The 7305S voice terminal has 24 feature-only buttons. Adjacent to each button is a green (status) indicator light. Self-Test The 7305S voice terminal is equipped with a self-test for its buttons and tone ringer. The self-test switch is located on the left side of the base. Loudspeaker The 7305S voice terminal has a built-in listen only loudspeaker. The volume control for the speaker is the same control used for the tone ringer volume.
The 7300 Series Voice Terminals Distance Limitations The maximum allowable distances of a 7303S from the DEFINITY G1, G2, and G3, the DEFINITY Enterprise Communications System (ECS), System 75, or System 85 cabinet are shown in the table below. Table 10-2.
The 7305S Voice Terminal Hearing Aid Compatible The 7305S voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7300 Series Voice Terminals 10-12 Issue 11 December 1999
The 7400 Series Voice Terminals 11 The following 7400 Series voice terminals are described in this section: ■ 7401D and 7401 Plus voice terminals ■ 7402 Plus voice terminal ■ 7403D voice terminal ■ 7404D voice terminal ■ 7405D voice terminal ■ 7406D, 7406BIS, and 7406 Plus voice terminals ■ 7407D, Enhanced 7407D, and 7407 Plus voice terminals ■ 7410D and 7410 Plus voice terminals ■ 7434D voice terminal ■ 7444 voice terminal Issue 11 December 1999 11-1
The 7400 Series Voice Terminals The 7401D and 7401 Plus Voice Terminals Speakerphone/ Headset Adapter Jack (on back of voice terminal for 7401 Plus only) 7401 Plus Ringer Volume Control (on the 7401D, control is on left side; on the 7401 Plus, control is on back of voice terminal) Handset Feature Directory F1 F2 F3 F4 F5 F6 F7 F8 F* Feature Directory ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * Oper O Message Dial Pad # Feature Feature Button Feature/Call Activity Lig
The 7401D and 7401 Plus Voice Terminals The 7401D (7401D01A) and the 7401 Plus (7401D02A, the newest 7401 set) are both single appearance digital voice terminals which have no call appearance buttons or lights, but have two virtual call appearances (refer to the section below titled Special Operational Characteristics). The user answers a call by going off-hook. The second appearance is primarily used with the Conference and Transfer features.
The 7400 Series Voice Terminals The Automatic Line Management (ALM) feature of the 7401D or 7401 Plus voice terminal automatically selects one of the two virtual call appearances when the user goes off-hook either by the user’s lifting the handset (on the 7401D or the 7401 Plus voice terminal) or turning on the optional speakerphone adjunct (on the 7401 Plus voice terminal). ALM follows a hierarchical algorithm. From the user’s point of view, the hierarchical order of actions which could take place is: 1.
The 7401D and 7401 Plus Voice Terminals Features The Feature Button The FEATURE button allows the dial pad to serve as 12 feature buttons without indicators: ■ Four standard fixed feature buttons: Conference, Transfer, Drop, Hold ■ The Select Ring feature ■ Seven administrable feature buttons used with the FEATURE button Feature/Call Activity Light The green Feature/Call Activity light goes on steadily when the user presses the FEATURE button.
The 7400 Series Voice Terminals Jacks The 7401D and 7401 Plus voice terminals’ housing has a Handset cord jack. (On the 7401D voice terminal, this jack is located just under the center front edge of the housing; on the 7401 Plus the Handset cord jack is located on the back of the housing near the front/center.) Both voice terminals have a Line jack located on the back of the housing.
The 7401D and 7401 Plus Voice Terminals Distance Limitations The maximum allowable distances of a 7401D or a 7401 Plus voice terminal from the DEFINITY ECS G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the following table. Table 11-1.
The 7400 Series Voice Terminals Switch Administration Aliasing The 7401 voice terminals must be aliased in the following way: Table 11-2.
The 7401D and 7401 Plus Voice Terminals Button Numbering The 7401 Plus (7401D02A) voice terminal can be administered in the same manner as the 7401D (7401D01A) voice terminal. Both types of voice terminals have 12 possible voice features; however, only seven of these features can be administered on the voice terminal (F1 through F7 on the Feature Directory).
The 7400 Series Voice Terminals Feature Directory Buttons 1 and 2 are line appearances. Buttons 3-9 are F1-F7. F1 F2 F3 F4 F5 F6 F7 F8 Conference F9 Transfer F0 Drop F# Hold F* Select Ring ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 1 * Message Figure 11-2.
The 7401D and 7401 Plus Voice Terminals Feature Directory Buttons 1 and 2 are the Hold Button and the Message Light. Buttons 3 and 4 are line appearances. Buttons 5-11 are F1 through F7. F1 F2 F3 F4 F5 F6 F7 F8 F9 F0 F# F* Conference Transfer Drop Hold Select Ring ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 1 * Message Figure 11-3.
The 7400 Series Voice Terminals FCC Registration These voice terminals are FCC-registered along with the switch (as a system), but do not have a separate FCC registration label. UL and CSA Approval These voice terminals have been tested and have met the Underwriters Laboratories (UL) Standards UL 1459 and have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90.
The 7401D and 7401 Plus Voice Terminals ■ Button designation cards (Package of 50) PEC: 31841 (Black=COL09; Misty Cream=COL22) Comcode: Black=846051225; Misty Cream=846051183 ■ Desk stand/Wall mount assembly Comcode: 846028546 7401 Plus Equipment with PECs and Comcodes The following 7401 Plus (7401D02A) voice terminal and components can be ordered with the following PECs and Comcodes: ■ Basic 7401 Plus Voice Terminal PEC: 3184-PLS (Black=COL18; Misty Cream=COL22) Comcode: Black=106224454; Misty Cream=
The 7400 Series Voice Terminals Adjuncts One of the following adjuncts can be used with the 7401D (7401D01A) voice terminal: ■ R6 Amplifier Handset (PEC: 3152-002) ■ R8 Noisy Location Handset (PEC: 3152-003) ■ 7400B Data Module The following adjuncts can be used with the 7401 Plus (7401D02A) voice terminal: ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone ■ CS201A Speakerphone ■ 7400B Data Module ■ 500A Headset Adapter (and a standard headset; see “Headsets” below) ■ R6 Ampl
The 7401D and 7401 Plus Voice Terminals Additional Documents The following documents contain additional information relating to the 7401D and 7401 Plus voice terminals: (Use the 9 digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The 7400 Series Voice Terminals The 7402 Plus Voice Terminal 2 Call Appearance/ Feature Buttons Speakerphone/ Headset Adapter Jack (on back of voice terminal) Handset 4 Feature-Only Buttons Message Light Conference/Ring Button Drop/Test Button Transfer Transfer Button Drop Hold Hold Button Test ABC DEF 2 3 GHI JKL MNO 4 5 PQRS 7 * Speaker Button 11-16 The 7402 Plus Voice Terminal Issue 11 December 1999 Select Button Conference Ring 1 Figure 11-4.
The 7402 Plus Voice Terminal The 7402 Plus is a multi-appearance digital voice terminal with two line appearances, four variable feature buttons, four standard fixed feature buttons (CONFERENCE, DROP, TRANSFER, and HOLD), a SELECT button, a Message light, a SPEAKER button for accessing a listen-only speaker, a Ringer Volume control, and a Speakerphone/headset adapter jack on the back of the voice terminal for connecting adjunct equipment.
The 7400 Series Voice Terminals Features Four Standard Fixed Feature Buttons ■ CONFERENCE/RING button ■ DROP/TEST button ■ TRANSFER button ■ HOLD button Message Light The red Message light goes on when a message is left for the user. It goes off when the user retrieves the message. Call Appearance and Feature Buttons The 7402 Plus voice terminal has two call appearance buttons, each with a red and green status light. The 7402 Plus also has four variable feature buttons.
The 7402 Plus Voice Terminal Other Physical Features Handset The 7402 Plus voice terminal is equipped with an R-type handset. Dial pad The 7402 Plus voice terminal is equipped with a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users. Jacks The 7402 Plus voice terminal’s housing contains three jacks.
The 7400 Series Voice Terminals Distance Limitations The maximum allowable distances of a 7402 Plus voice terminal from the DEFINITY G1, G2, G3, the DEFINITY ECS, System 75, or System 85 cabinet are shown in the following table. Table 11-3.
The 7402 Plus Voice Terminal Switch Administration Aliasing The 7402 voice terminals must be aliased in the following way: Table 11-4.
The 7400 Series Voice Terminals 1 6 2 7 3 8 Select Message Conference Ring Transfer Drop Hold Test ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 4 7 * Speaker Figure 11-5.
The 7402 Plus Voice Terminal 3 8 4 9 5 10 Select Message Conference Ring Transfer Drop Hold Test ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 4 7 * Speaker Figure 11-6. 2 5 8 Oper O 3 6 9 # Volume Button Numbering for Administering the 7402 Plus Voice Terminal Connected to a System 85 or a DEFINITY G2 Power Failure Operation The 7402 Plus voice terminal cannot be used as an emergency station during power failure transfer conditions.
The 7400 Series Voice Terminals FCC Registration The 7402 Plus voice terminal is FCC-registered along with the switch (as a system), but does not have a separate FCC registration label. UL and CSA Approval This voice terminal has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and has also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90.
The 7402 Plus Voice Terminal ■ Single sheets Comcode: 846523892 Pack of 50 Comcode: 846523900 Tractor feed, 200 Sheets Comcode: 846551448 Tractor feed, 500 Sheets Comcode: 846551455 ■ Faceplate Comcode: Black=846523876; Misty Cream=846523884 (Package of 50) PEC: 31867 (Black=COL09; Misty Cream=COL22) Comcode: Black=847043304, Misty Cream=847043312 ■ Desk stand/Wall mount assembly Comcode: 846028546 Adjuncts The following adjuncts can be used with this voice terminal: ■ S101A Speakerphone (no longer
The 7400 Series Voice Terminals Additional Documents The following documents contain additional information relating to the 7402 Plus voice terminal: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The 7403D Voice Terminal The 7403D Voice Terminal Handset Call Appearance/ Feature Buttons Conference Transfer Drop Hold 1 GHI 4 O Recall 3 6 Dial Pad WXY 9 OPER Message Light Figure 11-7.
The 7400 Series Voice Terminals Applications The 7403D voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. This voice terminal is especially suitable for managers, executive secretaries, and office support personnel. When equipped with a DTDM or 7400B, it is also suitable for users who have data terminals.
The 7403D Voice Terminal Self-Test The 7403D voice terminal is equipped with a self-test for its buttons and tone ringer. The self-test switch is located on the left side of the base. Other Physical Features Handset The 7403D voice terminal is equipped with an R-type handset. Dial pad The 7403D voice terminal is equipped with a 12-button touch-tone dial pad. Jacks The 7403D voice terminal housing contains three jacks. The handset cord jack is just under the left side of the housing.
The 7400 Series Voice Terminals Distance Limitations The maximum distance the 7403D voice terminal can be located from the system cabinet is shown in the following table. Table 11-5.
The 7403D Voice Terminal 7403D Equipment PECs The 7403D voice terminal and optional components were ordered with the following PECs: NOTE: The 7403D voice terminal has been discontinued, and thus it cannot be ordered.
The 7400 Series Voice Terminals The 7404D Voice Terminal Message Light Self-Test Switch (on left side of base) Call Appearance/ Feature Buttons Handset Data Call in Progress Light Conference Button Conference Transfer Transfer Button Drop 1 GHI 4 Volume Control (on left side) Figure 11-8.
The 7404D Voice Terminal The 7404D voice terminal can be equipped with one of two different optional cartridges. The Z300B cartridge provides a display of voice call related and personal service information on an attached data terminal. The Z300C cartridge provides an interface between an NCR PC (or compatible) with the PC/PBX Connection application program and the DEFINITY Communications System Generic 2 or System 85. NOTE: The 7404D voice terminal was discontinued in February, 1989.
The 7400 Series Voice Terminals Data Light The Data light goes on when a data call is in progress. Call Appearance/Feature Buttons The 7404D voice terminal has six call appearance/feature buttons. Adjacent to each button is a pair of red and green indicator lights. Self-Test The 7404D voice terminal is equipped with a self-test for its buttons and tone ringer. The self-test switch is located on the left side of the base.
The 7404D Voice Terminal Distance Limitations The maximum distances the 7404D voice terminal can be located from the system cabinet is shown in the following table. Table 11-6.
The 7400 Series Voice Terminals 7404D Equipment PECs The 7404D voice terminal and optional components were ordered with the following PECs: ■ Basic 7404D Voice Terminal — 3181-VDS ■ Handset cord (12 feet) — 2725-01L COL09 ■ Line cord (14 feet, silver) — 2725-07N COL18 ■ Line cord (25 feet, silver) — 2725-07S COL18 ■ Messaging Cartridge (Z300B) — 31810 ■ PC/PBX Feature Cartridge (Z300C) — 31815 Adjuncts The 7404D voice terminal cannot be equipped with an external adjunct.
The 7405D Voice Terminal The 7405D Voice Terminal 10 Call Appearance/ Feature Buttons 24 Feature Buttons Handset Transfer Button Conference Button Drop Button Hold Button Conference Drop Hold 1 GHI 4 PRS 7 Volume Control (on left side) * Message Recall Message Light Recall Button Figure 11-9.
The 7400 Series Voice Terminals The basic voice terminal provides 10 call appearance/feature buttons with lights that can be assigned to call appearances or system features. It has 24 programmable feature buttons and six fixed feature buttons. The 7405D can also have a function key module which adds 24 feature buttons and a call coverage module (when no display module is used) which adds 20 call appearance/feature buttons. NOTE: The 7405D voice terminal was discontinued in February, 1990.
The 7405D Voice Terminal Message Light The green Message light goes on when a message is left for the user. It goes off when the user retrieves the message. Call Appearance/Feature Buttons The 7405D voice terminal has 10 call appearance/feature buttons. Adjacent to each button is a pair of red and green indicator lights. Feature-only Buttons The 7405D voice terminal has 24 feature-only buttons. Adjacent to each button is a green status light.
The 7400 Series Voice Terminals Color Options The 7405D voice terminal was available in black and misty cream. Since it has become discontinued, it is only available in black. Distance Limitations The maximum allowable distance the 7405D voice terminal can be located from the switch cabinet is shown in the following table. Table 11-7.
The 7405D Voice Terminal Hearing Aid Compatible This voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7400 Series Voice Terminals The 7406D, 7406BIS, and 7406 Plus Voice Terminals 3 Feature Buttons Display Viewing Adjustment Display Handset 5 Call Appearance/ Feature Buttons Message Light Conference Button Select Ring Message Shift Conference Transfer Hold Drop Drop Button 1 Speaker Ringer Volume Control (on left side of voice terminal) GHI ABC 2 JKL DEF 3 MNO 4 5 6 PRS TUV WXY 7 8 9 Oper # * O Speaker 7406D Dial Pad Hold Button Transfer Button Shift Button Speaker Butto
The 7406D, 7406BIS, and 7406 Plus Voice Terminals Feature Button Mute Button Speaker Button Display Viewing Adjustment Display Handset Speaker 5 Call Appearance/ Feature Buttons Mute Select Ring Message Light Conference Button Drop Button Message Transfer Drop Hold 1 GHI Ringer Volume Control (under voice terminal) Shift Conference ABC 2 JKL DEF 3 MNO 4 5 6 PQRS TUV WXYZ 8 9 Oper # 7 * O Volume 7406 BIS Speaker Volume Control Button Dial Pad Hold Button Transfer Button Shif
The 7400 Series Voice Terminals 3 Two-Level Feature Buttons (with lights) Mute Button Speaker/Reset Spkr Button Display Handset Speaker 5 Call Appearance/ Feature Buttons Message Light Conference/ Ring Button Drop/Test Button Reset Spkr Mute Message Select Conference Ring Transfer Drop Hold Test 1 ABC 2 DEF 3 GHI JKL 4 5 6 PQRS TUV WXYZ 8 9 Oper # 7 * O MNO Volume 7406 Plus Dial Pad Hold Button Transfer Button Select Button Figure 11-12.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals The 7406D (four versions), 7406BIS (two versions), and 7406 Plus (two versions) multi-appearance digital voice terminals are described in the following table and in the following information. Table 11-8.
The 7400 Series Voice Terminals The 7406 Plus (which includes the 7406D07A and 7406D08A versions)— are the newest 7406 sets.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals Feature Buttons The 7406D, 7406 BIS, and 7406 Plus voice terminals have the following buttons and features: Four Standard Fixed Feature Buttons The 7406D, 7406BIS, and 7406 Plus have the following four standard fixed feature buttons: ■ CONFERENCE or CONFERENCE/RING button ■ DROP or DROP/TEST button ■ TRANSFER button ■ HOLD button Message light The 7406D, 7406BIS, and the 7406 Plus have a Message light.
The 7400 Series Voice Terminals Call Appearance/Feature Buttons The 7406D, 7406BIS, and 7406 Plus voice terminals have five call appearance/feature buttons. One-level Feature-only and Two-level Feature-only Buttons The 7406D (7406D01A—7406D04A) voice terminals have three buttons that can be used for one feature each, with a green light, and seven double-level feature buttons without lights.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals Loudspeaker/Spokesman/Speaker Feature The 7406D (7406D01A—7406D04A) voice terminals are equipped with a built-in, listen-only loudspeaker/Spokesman® capability. Use the SPEAKER button for turning on and off the loudspeaker. The 7406BIS and the 7406 Plus (7406D05A—7406D08A) voice terminals come with a built-in speakerphone that can be optioned for Spokesman operation.
The 7400 Series Voice Terminals Self-Test Two of the 7406D voice terminals (the 7406D03A and 7406D04A) and the 7406BIS voice terminals (7406D05A and 7406D06A) are equipped with a self-test. On these voice terminals, the Self-Test feature is performed by pressing the SHIFT button and then the DROP button. With the 7406 Plus (7406D07A and 7406D08A) voice terminals, the user presses the SELECT button and then the DROP/TEST button to initiate a self-test for the voice terminal.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals On the 7406 Plus (7406D07A and 7406D08A), tone ringer volume is controlled by the VOLUME “arrow” button. When the speakerphone is active, the VOLUME button controls the volume of the speakerphone; at all other times, the button controls the volume of the tone ringer.
The 7400 Series Voice Terminals Power Requirements The 7406D, 7406BIS, and 7406 Plus voice terminals receive power from the system and do not require any external power supply. Additional power is required when these voice terminals are equipped with any adjuncts or the Z703AL1 data stand. Refer to the Adjunct Power section earlier in this manual. Switch Administration Aliasing The 7406 voice terminals must be aliased in the following way: Table 11-10.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals — 7406D01A and 7406D02A w/Z703A DSU aliased as 7405D w/Data Module and Digital Display Module. Button Numbering The 7406D and 7406 Plus voice terminal button diagrams on the following pages will help you administer the 7406D, 7406BIS, and the 7406 Plus voice terminals on a System 75, a DEFINITY G1 and G3, or a DEFINITY ECS, and on a System 85 and a DEFINITY G2.
The 7400 Series Voice Terminals Administrable Call Appearance/Feature Buttons 1 4 2 2 5 3 3 Select Ring 1 4 Message Shift Conference Transfer Drop Hold 1 GHI 4 PRS 7 * 12 5 13 6 14 7 ABC DEF 3 15 8 JKL MNO 16 9 WXY 17 10 2 5 TUV 8 Oper O 6 9 # On the 7406BIS (7406D05A and 7406D06A) Voice Terminals, Button #2 is the Speaker Button. Button #3 is the Mute Button. 18 11 Speaker The Button shown as “Speaker” is the Speaker Volume Button on the 7406BIS.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals Administrable Call Appearance/Feature Buttons 3 6 14 4 7 15 5 Select Ring 13 16 Message Shift Conference Transfer Drop Hold 1 GHI 4 PRS 7 * 24 17 25 18 26 19 ABC DEF 3 27 20 JKL MNO 28 21 WXY 29 22 2 5 TUV 8 Oper O On the 7406BIS (7406D05A and 7406D06A) Voice Terminals, Button #14 is the Speaker Button. Button #15 is the Mute Button.
The 7400 Series Voice Terminals Administrable Call Appearance/Feature Buttons Speaker 1 4 2 5 Mute 3 2 1 4 3 Message Transfer Drop Hold Test GHI 4 PQRS 7 * 12 5 13 6 14 7 Select Conference Ring 1 Reset Spkr ABC DEF 3 15 8 JKL MNO 16 9 WXYZ 17 10 2 5 TUV 8 Oper O 6 9 # 18 11 Volume Administrable Feature-Only Buttons Figure 11-15.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals Administrable Call Appearance/Feature Buttons 6 4 7 Mute 5 14 13 16 15 Message Transfer Drop Hold Test 1 GHI 4 PQRS 7 Reset Spkr 24 17 25 18 26 19 Select Conference Ring * Speaker 3 ABC DEF 3 27 20 JKL MNO 28 21 WXYZ 29 22 2 5 TUV 8 Oper O 6 9 # 30 23 Volume Administrable Feature-Only Buttons NOTE: The Hold Button is Button #1. The Message Light is Button #2. Figure 11-16.
The 7400 Series Voice Terminals Power Failure Operation The 7406D, 7406BIS, and 7406 Plus voice terminals cannot be used as an emergency station during power failure transfer conditions. FCC Registration These voice terminals are FCC-registered along with the switch (as a system), but do not have a separate FCC registration label.
The 7406D, 7406BIS, and 7406 Plus Voice Terminals ■ Basic 7406D06A Voice Terminal without display with built-in speakerphone PEC: 3183-BIS (Black=COL09; Misty Cream=COL22) Comcode: Black=105703466; Misty Cream=105703474 ■ Handset PEC: 3152-006 (Black=COL09; Misty Cream=COL22) Comcode: Black=105519086; Misty Cream=105520787 ■ Handset cord (9 feet) Comcode: Black=105635429; Misty Cream=105635437 ■ Handset cord (12 feet) PEC: 2725-01L (Black=COL09; Misty Cream=COL22) Comcode: Black=102401445; Misty Cre
The 7400 Series Voice Terminals 7406 Plus Equipment PECs and Comcodes The 7406 Plus voice terminal and components can be ordered with the following PECs and Comcodes: 11-60 ■ Basic 7406D07A Voice Terminal with display with built-in speakerphone PEC: 3182-PLS (Black=COL09; Misty Cream=COL22) Comcode: Black=106202443; Misty Cream=106202450 ■ Basic 7406D08A Voice Terminal without display with built-in speakerphone PEC: 3183-PLS (Black=COL09; Misty Cream=COL22) Comcode: Black=106202468; Misty Cream=106202
The 7406D, 7406BIS, and 7406 Plus Voice Terminals Adjuncts The following adjuncts can be used with this voice terminal: ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone ■ CS201A Speakerphone ■ 7400B Data Module ■ 500A Headset Adapter (and a standard headset; see “Headsets” below) ■ R6 Amplifier Handset (PEC: 3152-002) ■ R8 Noisy Location Handset (PEC: 3152-003) ■ R2H Standard Handset (PEC: 3152-006) ■ Shoulder Rest Headsets A list of compatible headsets, consisting of both
The 7400 Series Voice Terminals The following document is shipped with every 7406 Plus voice terminal: ■ 7406 Plus Voice Terminal Installation Instructions, 555-015-126 The following document is included with the 7406D and 7406BIS voice terminals wall kit: ■ 7406BIS Wall Kit Voice Terminal Installation Instructions, 555-015-122 The following document is included with the 7406 Plus voice terminal wall kit: ■ 11-62 7406 Plus Voice Terminal Wall Kit Installation Instructions, 555-015-133 Issue 11 Decem
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Hold Button Transfer Button Display Display Viewing Adjustment Conference Button Drop Button Handset 10 Call Appearance/ Feature Buttons Conference Transfer Drop Hold ABC DEF GHI JKL MNO 4 5 1 2 Feature Buttons 2 PRS TUV 7 Ringer Volume Control under voice terminal) * O 1 4 2 5 3 6 Display Message 7 Speakerphone Message Light 7 Display Control Buttons Display
The 7400 Series Voice Terminals Speakerphone Headset Adapter Jack (on back of voice terminal) Hold Button Transfer Button Display Display Viewing Adjustment Conference Button Drop Button Handset 10 Call Appearance/ Feature Buttons Conference Transfer Drop Hold 1 GHI 2 Feature Buttons 4 7 1 5 2 6 3 7 4 Volume Volume Control Button Message Light DEF JKL MNO 2 5 PRS 7 Display Control Buttons ABC TUV 8 Oper * O Message Speaker 3 6 WXY 9 # Select Ring Mute Mute Button Sel
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Conference/Ring Button 10 Call Appearance/ Feature Buttons Handset Display Transfer Button Hold Button Drop/Test Button Conference Ring Transfer Drop Hold Test ABC 1 GHI 4 2 6 3 7 4 Volume MNO 5 6 TUV 7 5 3 JKL PQRS 1 DEF 2 WXYZ 8 9 Oper * # O Select Message Speaker Mute Reset Spkr Mute Button Volume Control Button 7 Display Feature Buttons Select Button Dial Pad 2 Feature Buttons Message Light Figure 11-19.
The 7400 Series Voice Terminals The 7407D, Enhanced 7407D, and 7407 Plus voice terminals are multi-appearance digital voice terminals which provide digital voice, display, and data capabilities (the latter with the 7400B Plus Data Module). There are three versions of the 7407D voice terminal.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals ■ The 7407 Plus (the 7407D02D)—offers 10 call appearance buttons, each with a red in-use light and a green status light, four standard fixed feature buttons (CONFERENCE, DROP, HOLD, and TRANSFER), three fixed feature buttons with one light each (SELECT, SPEAKER/RESET SPKR, and MUTE), nine feature buttons with one light each (the uppermost two buttons can be used for voice or display features, the lower seven buttons for display features), 22 flexibl
The 7400 Series Voice Terminals Use the following table to determine your PBX’s release and version for setting the following switches: ■ The R1/R2 switch on the 7407D01B voice terminal ■ Switch 1 on the 7407D02C voice terminal Table 11-11.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals DIP Switch Options for the 7407 Plus For the 7407 Plus (7407D02D) voice terminal, the 3-position DIP switch should be set in the following way: ■ Initially, Switch 1 is set to the OFF position. However, according to the release and version of the System 75 or 85 to which the voice terminal is connected, you may need to change Switch 1 to the ON position. Check the following table for this information. Table 11-12.
The 7400 Series Voice Terminals Physical Features Dimensions NOTE: The dimensions given here for the 7407 voice terminals are approximate.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals SELECT button (on the 7407 Plus only) The 7407 Plus (7407D02D) voice terminal has a SELECT button which can be used in three different ways: ■ Used with the DROP/TEST button to initiate a self-test of your voice terminal (which tests the lights, tone ringer, and display) ■ Used with the CONFERENCE/RING button to select your own personalized ring from among eight available patterns ■ Used with the SPEAKER/RESET SPKR button to perform an acoustic
The 7400 Series Voice Terminals Feature-only Buttons on the Enhanced 7407D (7407D02C) The Enhanced 7407D (7407D02C) voice terminal has the following sets of feature buttons: ■ 22 feature buttons in the rightmost column, all without lights ■ nine feature buttons on the bottom left, each with a green status light. The two upper buttons are for voice features. The lower seven buttons are for display control functions and/or features.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals The Speaker (listen-only) and Spokesman capability allows a user to engage in a one-way conversation with the far-end. Specifically, the user can only listen to the far-end; the user is not able to transmit his voice over the speaker. To speak with the far-end, the user must use the handset. With the Enhanced 7407D voice terminal, the handset and Speaker capability can be used simultaneously.
The 7400 Series Voice Terminals During the self-test, all the lights go on, the ringer sounds, and the display character positions are lit. On the Enhanced 7407D and the 7407 Plus voice terminals, the self-test ends when the user releases the DROP or DROP/TEST button. On the 7407D voice terminal, the lights stay lit for a few seconds and then go off. Display The 7407D, Enhanced 7407D, and 7407 Plus voice terminals are equipped with a built-in, 2-line, 40-character per line, liquid crystal display.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Cords Three cords are supplied with the 7407D (7407D01B) voice terminal: a coiled 9-foot modular handset cord, 7-foot modular line cord and an AC power cord. Two cords are supplied with the Enhanced 7407D (7407D02C) and 7407 Plus (7407D02D) voice terminal: a coiled 9-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, 14-foot and 25-foot line cords.
The 7400 Series Voice Terminals Distance Limitations The maximum distances the 7407D, Enhanced 7407D, and 7407 Plus voice terminals can be located from the system cabinet are shown in the table below. Table 11-13.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Switch Administration Aliasing The 7407 voice terminals must be aliased in the following way: Table 11-14.
The 7400 Series Voice Terminals If you need more information, refer to DEFINITY Communications System Generic 3 Implementation, 555-230-653, and DEFINITY Communications System Generic 2 Administration of Features and Hardware, 555-104-507.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Button Assignments 3 - 12 3 8 Conference Transfer 4 9 Drop Hold 5 10 6 11 7 12 GHI Display 1 14 Display 4 Display 2 Display 5 Display 3 Display 6 Message Display 7 15 26 C/ CE 16 27 M R 17 28 18 29 19 30 20 31 21 32 22 33 23 34 24 35 25 36 M 1 13 P R ABC 2 JKL 4 5 PRS TUV 7 * 8 Oper O DEF 3 MNO 6 M + + WXY 9 X # + Display Speakerphone Feature Button Assignments 13 and 14 Cal
The 7400 Series Voice Terminals Button Assignments 1 - 10 1 6 Conference Transfer 2 7 Drop Hold 3 8 4 9 5 10 1 Display 1 Display 2 Display 3 Display 4 2 Display 5 DEF JKL MNO 2 GHI 1 ABC 4 5 PRS TUV 7 * 8 Oper O 11-80 6 Display 7 Volume 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 WXY 9 # Display 6 11 22 Message Select Ring 12 23 Speaker Mute 13 24 Feature Button Assignments 1 and 2 Figure 11-22.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Button Assignments 3 - 12 3 8 Conference Transfer 4 9 Drop Hold 5 10 6 11 7 12 1 Display 1 Display 2 Display 3 Display 4 14 Display 5 DEF JKL MNO 2 GHI 13 ABC 4 5 PRS TUV 7 * 8 Oper O 3 6 Volume 26 16 27 17 28 18 29 19 30 20 31 21 32 22 33 WXY 9 # Display 6 Display 7 15 23 34 Message Select Ring 24 35 Speaker Mute 25 36 Feature Button Assignments 13 and 14 Feature Button Assignments 1
The 7400 Series Voice Terminals Button Assignments 1 - 10 1 6 Conference Ring Transfer 2 7 Drop Test Hold 3 8 4 9 5 10 1 Display 1 2 Display 5 Display 2 Display 6 Display 3 Display 7 Display 4 Volume DEF JKL MNO 2 GHI 1 ABC 4 5 PRS TUV 7 * 8 Oper O 11-82 6 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 11 22 WXY 9 # Message Select 12 23 Speaker Reset/Spkr Mute 13 24 Feature Button Assignments 1 and 2 Figure 11-24.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Button Assignments 3 - 12 3 8 Conference Transfer 4 9 Drop Hold 5 10 6 11 7 12 1 Display 1 Display 2 Display 3 Display 4 14 Display 5 DEF JKL MNO 2 GHI 13 ABC 4 5 PRS TUV 7 * 8 Oper O 3 6 Volume 26 16 27 17 28 18 29 19 30 20 31 21 32 22 33 WXY 9 # Display 6 Display 7 15 23 34 Message Select Ring 24 35 Speaker Mute 25 36 Feature Button Assignments 13 and 14 Feature Button Assignments 1
The 7400 Series Voice Terminals UL and CSA Approval These voice terminals have been tested and have met the Underwriters Laboratories (UL) Standards UL 1459. In addition, the Enhanced 7407D and the 7407 Plus voice terminals have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90. Hearing Aid Compatible These voice terminals are compatible with the inductively coupled hearing aids prescribed by the FCC.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals ■ Display Bezel Comcode: Black=846151876; Misty Cream=846151884 ■ Button designation card PEC: 81004 (Package of 25) Single Comcode: 846342038 Pack of 25 Comcode: 846342046 Tractor Feed Comcode: 846342020 7407 Plus Equipment PECs and Comcodes The 7407 Plus (7407D02D) voice terminal and optional components can be ordered with the following PECs and Comcodes: ■ Basic 7407D02D Voice Terminal PEC: 3180-PLS (Black=COL09; Misty Cream=COL22) Comcode: B
The 7400 Series Voice Terminals Adjuncts The following adjuncts can be used with these voice terminals: NOTE: Any adjunct equipment connected to the 7407 sets needs auxiliary power, except for the 7400B Plus Data Module, which is AC powered.
The 7407D, Enhanced 7407D, and 7407 Plus Voice Terminals Additional Documents The following documents contain additional information relating to the 7407D, Enhanced 7407D, and 7407 Plus voice terminal: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The 7400 Series Voice Terminals The 7410D and 7410 Plus Voice Terminals 7410D Speakerphone/ Headset Adapter Jack (on back of voice terminal) 10 Call Appearance/ Feature Buttons Handset Conference Button Conference Transfer Drop Hold Transfer Button Hold Button Drop Button Ringer olume Control (on side of voice terminal) ABC DEF 2 3 GHI JKL MNO 4 5 1 PRS TUV 7 8 Oper * O Message 6 Dial Pad WXY 9 # Select Select Ring Button Select Ring Light Message Light Figure 11-26.
The 7410D and 7410 Plus Voice Terminals 10 Call Appearance/ Feature Buttons 7410 Plus Handset Speakerphone/ Headset Adapter Jack (on back of voice terminal) Line Jack (on back of voice terminal) Message Light Conference/Ring Button Drop/Test Button Conference Ring Transfer Drop Hold Test 1 GHI 4 PRS 7 * Speaker Button Figure 11-27.
The 7400 Series Voice Terminals The 7410D (7410D01A) and 7410 Plus (7410D02A, the newest 7410 set) are both multi-appearance digital voice terminals with 10 line appearances, four standard fixed feature buttons and a Select Ring button.
The 7410D and 7410 Plus Voice Terminals Features Four Standard Fixed Feature Buttons ■ CONFERENCE or CONFERENCE/RING button ■ DROP or DROP/TEST button ■ TRANSFER button ■ HOLD button Message Light The Message light goes on when a message is left for the user. It goes off when the user retrieves the message. On the 7410D voice terminal, the Message light is green; on the 7410 Plus voice terminal, the Message light is red.
The 7400 Series Voice Terminals VOLUME control button (on 7410 Plus) When the speaker is active on the 7410 Plus voice terminal speaker, the VOLUME control button affects the loudness of the Speaker (listen-only) feature. At all other times (when the speaker is not being used), the VOLUME control button affects the volume of the tone ringer. Other Physical Features Handset The 7410D and the 7410 Plus voice terminals are equipped with an R-type handset.
The 7410D and 7410 Plus Voice Terminals Mounting Options The 7410D and 7410 Plus voice terminals comes equipped with a desk stand or can be wall-mounted. Color Options The 7410D and 7410 Plus voice terminals are available in black and misty cream. Distance Limitations The maximum allowable distances of a 7410D or a 7410 Plus voice terminal from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the following table. Table 11-15.
The 7400 Series Voice Terminals Switch Administration Aliasing The 7410 voice terminals must be aliased in the following way: Table 11-16.
The 7410D and 7410 Plus Voice Terminals 1 6 2 7 3 8 4 9 5 10 Conference Transfer Drop Hold ABC DEF GHI JKL MNO PRS TUV WXY 1 4 7 * Message Figure 11-28.
The 7400 Series Voice Terminals 3 8 4 9 5 10 6 11 7 12 Conference Transfer Drop Hold ABC DEF GHI JKL MNO PRS TUV WXY 1 4 7 * Message 2 5 8 Oper O 3 6 9 # Select Ring NOTE: The Hold Button is Button #1. The Message Light is Button #2. Figure 11-29.
The 7410D and 7410 Plus Voice Terminals 1 6 2 7 3 8 4 9 5 10 Select Message Conference Ring Transfer Drop Hold Test ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 4 7 * Speaker Figure 11-30.
The 7400 Series Voice Terminals 3 8 4 9 5 10 6 11 7 12 Select Message Conference Ring Transfer Drop Hold Test ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 4 7 * Speaker 2 5 8 Oper O 3 6 9 # Volume NOTE: The Hold Button is Button #1. The Message Light is Button #2. Figure 11-31.
The 7410D and 7410 Plus Voice Terminals Power Failure Operation The 7410D and 7410 Plus voice terminals cannot be used as an emergency station during power failure transfer conditions. FCC Registration These voice terminals are FCC-registered along with the switch (as a system), but do not have a separate FCC registration label.
The 7400 Series Voice Terminals ■ Graphic panel Comcode: Black=846118016; Misty Cream=846118024 ■ Button designation card (Package of 50) PEC: 31861 Comcode: 846131977 ■ Desk stand/Wall mount assembly Comcode: 846028546 7410 Plus Equipment PECs and Comcodes The 7410 Plus (7410D02A) voice terminal and components can be ordered with the following PECs and Comcodes: 11-100 ■ Basic 7410D02A Voice Terminal PEC: 3186-PLS (Black=COL09; Misty Cream=COL22) Comcode: Black=106224470; Misty Cream=106224488 ■
The 7410D and 7410 Plus Voice Terminals Adjuncts The following adjuncts can be used with this voice terminal: ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone ■ CS201A Speakerphone ■ 7400B Data Module ■ 500A Headset Adapter (and a standard headset: see “Headsets” below) ■ R6 Amplifier Handset (PEC: 3152-002) ■ R8 Noisy Location Handset (PEC: 3152-003) ■ R2H Standard Handset (PEC: 3152-019) ■ Shoulder Rest Headsets A list of compatible headsets, consisting of both modular an
The 7400 Series Voice Terminals The 7434D Voice Terminal 34 Call Appearances/ Feature Buttons Handset Transfer Button Conference Button Conference Drop Button Hold Button Transfer Hold Drop ABC DEF GHI JKL MNO 4 5 6 PRS TUV WXY 1 2 7 * Volume Control (on left side) 8 Oper Message O 3 9 # Select Ring Message Light Dial Pad Select Ring Light Select Ring Button Figure 11-32. The 7434D Voice Terminal The 7434D is a multi-appearance digital voice terminal.
The 7434D Voice Terminal Applications The 7434D voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, or System 85. It is an appropriate terminal for users who handle numerous calls and who need button access to a wide variety of features. For example, the 7434D voice terminal, with its large number of administrable buttons, can use the Abbreviated Dialing feature for reaching many frequently called parties.
The 7400 Series Voice Terminals SELECT RING button — a special fixed feature button that has two functions: ■ — When used with the * dial pad key, it allows the user to select one of eight personalized ringing patterns for incoming calls. — When used with the DROP button, it allows the user to test the lights, ringer, and display module (if installed) of the voice terminal. The Select Ring test function replaces the Self-Test switch found on most other terminals.
The 7434D Voice Terminal Cords Two cords are supplied with the 7434D voice terminal: a coiled 7-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, 14-foot and 25-foot line cords. Ringing The 7434D voice terminal has electronic tone ringing with patterns that can be selected via the SELECT RING button. The volume control is on the left side of the housing.
The 7400 Series Voice Terminals Power Requirements The 7434D voice terminal is phantom-powered from the system cabinet, or from a local power supply, on the digital pairs of the line wiring. Adjuncts connected to the 7434D voice terminal require auxiliary power and do not impose a drain on the voice terminal supply. Refer to the Adjunct Power section earlier in this manual. Power Failure Operation The 7434D voice terminal cannot be used as an emergency station during power failure transfer conditions.
The 7434D Voice Terminal Adjuncts The following adjuncts can be used with the 7434D voice terminal: ■ S101A Speakerphone or 500A Headset Adapter ■ S201A Speakerphone or 500A Headset Adapter ■ C401A or C401B Call Coverage Module or D401A or D401B Digital Display Module ■ 7400B Data Module NOTE: Auxiliary power is required when any adjuncts are added to the basic voice terminal.
The 7400 Series Voice Terminals The 7444 Voice Terminal 22 Call Appearances/ Feature Buttons Transfer Button Conference/Ring Button 12 Call Appearance/ Feature Buttons Display Drop/Test Button Hold Button Handset Conference Ring Transfer Drop Hold Test ABC 1 2 3 GHI JKL 4 5 6 PQRS TUV WXYZ 7 8 9 Oper # * O Message Volume DEF Speaker Reset Spkr MNO Select Mute Volume Control Button Message Light 7 Display Control Buttons Figure 11-33.
The 7444 Voice Terminal The 7444 voice terminal is a multi-appearance digital voice terminal, similar to the 7434 voice terminal.The 7444 voice terminal is a multi-appearance digital voice terminal, similar to the 7434 voice terminal.
The 7400 Series Voice Terminals Physical Description Dimensions NOTE: The dimensions given here for the 7444 voice terminal are approximate.
The 7444 Voice Terminal terminal’s primary extension number, where calls are placed and answered. The rest of the buttons can be used for more call appearances (including bridged appearances of other stations’ extensions) and features. Buttons administered for features have only their status lights active. Seven Display Feature Buttons (with a green status light) The 7444 has seven administrable display feature buttons, each with a green status light.
The 7400 Series Voice Terminals VOLUME control button The 7444 voice terminal has a VOLUME “arrow” button. This button has a double function. When the user is on a call, the VOLUME button controls the volume of the speaker or speakerphone, whichever is being used; when the user is not using the speaker or speakerphone, the VOLUME control button adjusts the tone ringer.
The 7444 Voice Terminal Ringing The 7444 voice terminal has electronic tone ringing with eight possible ringing patterns that can be selected with the SELECT button and the CONFERENCE/RING button. The loudness of the tone ringer can be controlled by the VOLUME “arrow” button. (The user must not be on a speakerphone call. If the user is using the speakerphone, the VOLUME “arrow” button controls the volume of the speakerphone.
The 7400 Series Voice Terminals Power Requirements The 7444 voice terminal is phantom-powered from the system cabinet on the digital pairs of the line wiring. In order to use the display on the 7444 voice terminal, you must connect an auxiliary power source to the voice terminal. Recommended local power supplies are the 1151A1 or 1151A2 with Battery Holdover or the MSP-1 Power Supply. Switch Administration Aliasing The 7444 voice terminals must be aliased in the following way: Table 11-19.
The 7444 Voice Terminal ■ Only 10 call appearance buttons can be administered with two lights, a red and a green light. ■ If the voice terminal is administered as a 7407D, the S1 switch on the back of the 7444 voice terminal must be in the OFF position. When the 7444 voice terminal is administered as a 7405D or a 7434 voice terminal, the following caveats apply: ■ The S1 switch on the back of the 7444 voice terminal must be in the ON position.
The 7400 Series Voice Terminals Button Assignments 1 - 10 1 6 Conference Ring Transfer 2 7 Drop Test Hold 3 8 4 9 5 10 1 2 ABC 1 GHI 2 JKL 4 PRS 5 TUV 7 * Display 1 Oper O 14 4 15 5 16 6 17 7 18 8 19 9 20 10 21 11 22 Select 12 23 Mute 13 24 DEF 3 MNO 6 WXY 9 # Display 5 Display 2 Display 6 Display 3 Display 7 Display 4 8 3 Volume Message Speaker Reset/Spkr Feature Button Assignments* 1 and 2 Feature Button Assignments* 3 - 24 * If aliased as
The 7444 Voice Terminal Button Assignments 3 - 12 8 3 4 9 5 10 6 11 7 12 13 14 Conference Ring Transfer Drop Test Hold ABC 1 GHI 5 26 16 27 17 28 18 29 19 30 20 31 21 32 22 33 23 34 Select 24 35 Mute 25 36 DEF 3 MNO 6 PQRS TUV WXYZ 7 8 9 Oper O # Display 5 Display 2 Display 6 Display 3 Display 7 Display 4 JKL 4 * Display 1 2 15 Volume Message Speaker Reset/Spkr Feature Button Assignments 13 and 14 Feature Button Assignments 15 - 36 NOTE:
The 7400 Series Voice Terminals Power Failure Operation The 7444 voice terminal cannot be used as an emergency station during power failure transfer conditions. FCC Registration This voice terminal is FCC-registered along with the switch (as a system), but does not have a separate FCC registration label. UL and CSA Approval This voice terminal has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.
The 7444 Voice Terminal ■ Button designation card PEC: 81005 (Package of 25) Single, Comcode: Black=846604759; Misty Cream=846604767 Pack of 25 Sheets Comcode: Black=846692341; Misty Cream=846692358 Tractor Feed, 200 Sheets Comcode: Black=846604775; Misty Cream=846604783 Adjuncts The following adjuncts can be used with the 7444 voice terminal: NOTE: Auxiliary power is required when any adjuncts are added to the basic voice terminal, except for the 7400B Plus Data Module which is AC powered.
The 7400 Series Voice Terminals 11-120 Issue 11 December 1999
The 8400 Series Voice Terminals 12 The following 8400 Series voice terminals are described in this section: ■ 8403 voice terminal ■ 8405 voice terminal ■ 8410 voice terminal ■ 8411 voice terminal ■ 8434 and 8434DX voice terminals Issue 11 December 1999 12-1
The 8400 Series Voice Terminals The 8403 Voice Terminal 8403 Handset Volume Control Button Feature Directory 3 Call Appearance Buttons Transfer Button Feature Button Conference Button Test Button a b ABC Drop Button Test Conf Mute Drop Speaker Hold Ring 1 JKL 4 5 PQRS TUV 3 MNO 6 LINE Line Jack (on back of terminal) WXYZ 7 8 9 * O # Mute Button Hold/Ring Button One Version of the 8403 Voice Terminal 12-2 Issue 11 December 1999 DEF 2 GHI Speaker Button Figure 12-1.
The 8403 Voice Terminal Handset Volume control button Feature Directory Transfer button a b c Feature button 3 Call appearance buttons Conference button Test button Message light Volume Feature Transfer Drop button Test Mute button Speaker button Conf Mute Drop Speaker Hold ABC 1 2 DEF 3 GHI JKL MNO PQRS TUV WXYZ * O 4 7 5 8 6 LINE Line jack (on back of voice terminal) 9 # Dial pad Speakerphone/ headset adapter jack (on back of voice terminal) Hold/Ring button Handse
The 8400 Series Voice Terminals Physical Features Dimensions NOTE: The dimensions described here for the 8403 voice terminal are approximate.
The 8403 Voice Terminal Call Appearance Buttons The 8403 voice terminal has three call appearance buttons. Each of the buttons has a red light and a green status light. Message Light The red Message light goes on when a message is left for the user. It goes off when the user retrieves the message or when the message is erased. This light is labeled either Message or . SPEAKER Button The 8403 voice terminal is set for the 1-way, listen-only Speaker feature. The user can only listen to the far-end.
The 8400 Series Voice Terminals Jacks The 8403 voice terminal’s housing has a Line jack and a Handset cord jack located on the back of the housing. There is also a Speakerphone/headset adapter jack on the back of the set to which the user can connect adjunct equipment. Cords Two cords are supplied with the 8403: a coiled 9-foot handset cord and a 7-foot line cord. Optional longer cords are available: a 12-foot handset cord and 14-foot and 25-foot line cords.
The 8403 Voice Terminal Table 12-1. The Pins on an 8400-Series Voice Terminal LINE Jack Line Interface Pin Pair Name Description 6 3 ID2 4-Wire Input 7 4 P1- Adjunct Power -48V 8 4 P2+ Adjunct Power Common NOTE: Regardless of which configuration is in use, ALL wiring between the PBX and the terminal MUST consist of twisted-pairs, including the modular line cord. The line cord must be a D8W, which consists of 4 twisted-pairs, or a Lucent Technologies-approved equivalent.
The 8400 Series Voice Terminals Distance Limitations The following circuit packs can be used with all of the 8400-Series sets. Table 12-2.
The 8403 Voice Terminal Switch Administration Aliasing Use the following table for administering the 8403 voice terminal: Table 12-3. Administering the 8403 Voice Terminal If you have this System and this Release (which can support this type of operation) System 75 R1V1 — R1V3 4-wire only 7405 System 85 R2V2 — R2V4 4-wire only 7405 International System 75 IR1V4, etc.
The 8400 Series Voice Terminals 8403 If administered as a 7405D, F1 through F7 are administered as “BUTTON ASSIGNMENTS” 4 through 10. F8, F9, F*, F0, and F# are administered as “FEATURE BUTTON ASSIGNMENTS” 1 through 5. If administered as itself, administer F1 through F9, F*, F0, and F# as “FEATURE BUTTON ASSIGNMENTS” 1 through 12.
The 8403 Voice Terminal 8403 If administered as a 7405D, F1 through F7 are administered as “BUTTON ASSIGNMENTS” 6 through 12. F8, F9, F*, F0, and F# are administered as “FEATURE BUTTON ASSIGNMENTS” 13 through 17. If administered as itself, administer F1 through F9, F*, F0, and F# as “FEATURE BUTTON ASSIGNMENTS” 1 through 12. Call appearance buttons a, b, and c are administered as call appearance “BUTTON ASSIGNMENTS” 3, 4, and 5.
The 8400 Series Voice Terminals FCC Registration The 8403 voice terminal is FCC-registered along with the switch (as a system), but does not have a separate FCC registration label. UL and CSA Approval This voice terminal has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and has also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90.
The 8403 Voice Terminal ■ Button Designation Cards Tractor Feed For 25 Sets, 5 Sheets PEC: 32307 Comcode: 847167962 Tractor Feed, For 100 Sets, 20 Sheets PEC: 32308 Comcode: 847167970 Adjuncts The following adjuncts can be used with the 8403 voice terminal: ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone ■ CS201A Speakerphone ■ 7400B Plus Data Module ■ 500A Headset Adapter (and a standard headset; see “Headsets” below) ■ K6S2 Amplifier Handset ■ Shoulder Rest Headsets A list
The 8400 Series Voice Terminals The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Handset Volume Control Button 5 Call Appearance/ Feature Buttons Transfer Button Handset Jack (on left side of terminal) Message Light Volume ABC Shift Button Test Button Mute Button Speaker/ Reset Speaker Button 1 Shift GHI Test Conf Mute Drop Speaker Hold Hold/Ring Button DEF 2 Transfer JKL 4 5 PQRS TUV 3 MNO 6 LINE WXYZ 7 8 9 * O # Dial Pad Conference Button Drop Button Figure 12
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Handset Volume control button 5 Call appearance/ feature buttons Transfer button Message light Volume ABC Ring Ring button Test button Mute button Transfer 1 2 GHI Test Speaker button Conf Mute Drop Speaker Hold DEF JKL 4 5 PQRS TUV 3 MNO 6 LINE Line jack (on back of voice terminal) WXYZ 7 8 9 * O # Speakerphone/ headset adapter jack (on back of voice terminal) Dial pad Conference button Handset jack Figure 12-6
The 8400 Series Voice Terminals Display Handset 4 Softkeys Menu Exit Prev Next Volume Control Button 4 Display Control Buttons 5 Call Appearance/ Feature Buttons Transfer Button Handset Jack (on left side of terminal) Message Light Volume ABC Shift Button 1 Shift Test Button Test Conf Mute Button Mute Drop Speaker Hold Speaker/ Reset Speaker Button Hold/Ring Button Drop Button Figure 12-7.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Display Handset Softkeys Menu Exit Prev Next Volume control button Display control buttons 5 Call appearance/ feature buttons Transfer button Message light Volume ABC Ring Ring button Test button Mute button Speaker button Transfer Test Conf Mute Drop Speaker Hold 1 DEF 2 GHI JKL 4 5 PQRS TUV 3 MNO 6 LINE Line jack (on back of voice terminal) WXYZ 7 8 9 * O # Speakerphone/ headset adapter jack (on back of voic
The 8400 Series Voice Terminals Those users who have an 8405D or an 8405D Plus can access 12 features with the softkeys and display control buttons. These 12 features can be used in addition to the features on the call appearance/feature buttons. The 8405 voice terminal can work in both 4-wire and 2-wire environments. For more information, see “Wiring Information.” NOTE: As of September 1, 1998, the 8405B Plus (with speakerphone) and the 8405D (with display and listen-only speaker) will be discontinued.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Features Eight Fixed Feature Buttons The 8405 has the following eight fixed feature buttons: ■ CONFERENCE (labeled CONF) button ■ DROP button ■ TRANSFER button ■ A red HOLD button ■ Either a blue SHIFT button or a RING button ■ MUTE button ■ SPEAKER button ■ TEST button The SHIFT Button Some 8405 voice terminals have a blue SHIFT button that can be used in the following ways: (The red light next to the SHIFT button goes on steadil
The 8400 Series Voice Terminals Speaker (Listen-Only) Feature The 8405B and the 8405D have a 1-way, listen-only speaker. The 8405B Plus and the 8405D Plus have a two-way speakerphone; however, these two voice terminals can be optioned instead for a 1-way, listen-only speaker. If this is the case, use the SPEAKER button on the front of the voice terminal for turning on and off the speaker. The Speaker (listen-only) capability allows a user to engage in a 1-way conversation with the far-end.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals VOLUME Control Button The 8405 voice terminal has a VOLUME “arrow” button on the front of the set. This button has several functions. When the user is using the speakerphone or the 1-way speaker, the VOLUME button controls the volume of the speaker. When the user is on a call using the handset, the VOLUME button controls the handset volume. When the voice terminal is idle, the button controls the volume of the tone ringer.
The 8400 Series Voice Terminals Below is a list of the 12 default softkey features assigned to the 8405D and 8405D Plus and the order in which they appear. Table 12-4.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Table 12-5.
The 8400 Series Voice Terminals Other Physical Features Handset The 8405 voice terminal is equipped with a K-type handset. Dial pad The 8405 voice terminal has a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Wiring Information The 8405 voice terminal works in both 4-wire and 2-wire DCP configurations. The table below describes the pins on an 8400-Series voice terminal LINE jack. Table 12-6.
The 8400 Series Voice Terminals In order for the terminal to function properly in either 2-wire or 4-wire installations, there must be NO INTERCONNECTIONS between the wire pairs used for 2-wire and 4-wire operations. Bridging or paralleling of these pairs can result in damage to the terminal or can cause the PBX circuit pack to remove power to the terminal. REMOVE ALL CONNECTIONS BETWEEN PAIRS BEFORE CONNECTING THE TERMINAL.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Switch Administration Aliasing Use the following table for administering 8405B and 8405B Plus voice terminals: Table 12-8. Administering the 8405B and 8405B Plus Voice Terminals and this Release (which can support this type of operation) Administer 8405B or 8405B Plus as a System 75 R1V1 — R1V3 4-wire only 7403D System 85 R2V2 — R2V4 4-wire only 7403D International System 75 IR1V4, etc.
The 8400 Series Voice Terminals Use the following table for administering the 8405D and 8405D Plus voice terminals: Table 12-9. Administering the 8405D and 8405D Plus Voice Terminals and this Release (which can support this type of operation) Administer the 8405D or 8405D Plus as a System 75 R1V1 — R1V3 4-wire only 7405D+D System 85 R2V2 — R2V4 4-wire only 7405D+D International System 75 IR1V4, etc.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals If you need more information, refer to DEFINITY Communications System Generic 3 Implementation, 555-230-653, and DEFINITY Communications System Generic 2 Administration of Features and Hardware, 555-104-507. If the 8405D or 8405D Plus is administered as a 7405D, administer the 12 softkey features on “FEATURE BUTTON ASSIGNMENTS” 2 through 13; administer the Normal feature on Button #1.
The 8400 Series Voice Terminals If the 8405D or 8405D Plus is administered as a 7405D, administer the 12 softkey features on “FEATURE BUTTON ASSIGNMENTS” 14 through 25; administer the Normal feature on Button #13. If the 8405D or 8405D Plus is administered as an 8410D, administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. Menu Exit Prev Next 3 4 The 5 call appearance/ feature buttons are administered as “BUTTON ASSIGNMENTS” 3 through 7. 5 6 7 Volume Figure 12-10.
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals UL and CSA Approval The 8405 voice terminal has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and has also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90. Hearing Aid Compatible All 8405 voice terminals are compatible with the inductively coupled hearing aids prescribed by the FCC.
The 8400 Series Voice Terminals ■ Line cord (14 feet, silver) PEC: 2725-07N (COL18) Comcode: 103786828 ■ Line cord (25 feet, silver) PEC: 2725-07S (COL18) Comcode: 103786802 ■ Button Designation Card Tractor Feed For 25 Sets PEC: 32310A Comcode: 847770666; Tractor Feed For 100 Sets PEC: 32311A Comcode: 847770674 Adjuncts The following adjuncts can be used with the 8405 voice terminal: ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone ■ CS201A Speakerphone ■ 7400B Plus Data Module
The 8405B, 8405B Plus, 8405D, and 8405D Plus Voice Terminals Additional Documents The following documents contain additional information relating to the 8405 voice terminal: (Use the 9 digit number listed after each document to order that book from the BCS Publications Center for Lucent Technologies.
The 8400 Series Voice Terminals The 8410 Voice Terminal 8410D Display Handset 4 Softkeys Menu Exit Prev Next 4 Display Control Buttons Volume Control Button 10 Call Appearance/ Feature Buttons Transfer Button Handset Jack (on left side of terminal) Message Light Message Volume ABC 1 Shift Button Shift Test Button Test Conf Mute Drop Speaker Hold Mute Button Reset Spkr Speaker/ Reset Speaker Button Ring Hold/Ring Button DEF 2 Transfer GHI JKL 4 5 PQRS TUV 3 MNO 6 LINE W
The 8410 Voice Terminal Display Handset Softkeys Menu Exit Prev Next Volume control button Display control buttons 10 Call appearance/ feature buttons Transfer button Message light Volume ABC Ring Ring button Test button Mute button Speaker button Transfer Test Conf Mute Drop Speaker Hold 1 DEF 2 GHI JKL 4 5 PQRS TUV 3 MNO 6 LINE Line jack (on back of voice terminal) WXYZ 7 8 9 * O # Speakerphone/ headset adapter jack (on back of voice terminal) Dial pad Conference but
The 8400 Series Voice Terminals The 8410 voice terminal can work in both 4-wire and 2-wire environments. For more information, see “Wiring Information.” Applications The 8410 voice terminal can be used with the DEFINITY Communications System Generic 1, Generic 2, or Generic 3, the DEFINITY ECS, System 75, and System 85.
The 8410 Voice Terminal ■ MUTE button ■ SPEAKER button ■ TEST button The SHIFT Button Some 8410 voice terminals have a blue SHIFT button that can be used in the following ways: (The red light next to the SHIFT button goes on steadily when the button is activated.
The 8400 Series Voice Terminals NOTE: If there is not a SHIFT button and Reset Spkr does NOT appear under the SPEAKER button, the voice terminal will adjust to the surrounding environment by itself. The user does not need to do anything manually. By pressing the blue SHIFT button on the set and then the SPEAKER button (if the voice terminal is set for the Speakerphone feature), the user hears a set of tones as the speakerphone performs an acoustic test of the environment.
The 8410 Voice Terminal TEST Button When the voice terminal is initially powered up, the green light next to the TEST button flashes if the link with the PBX is not (or not yet) operational. The light changes to steady green when the voice terminal is able to communicate with the PBX. After the voice terminal is powered up, you can press the TEST button to test the lights and the display on your voice terminal. Display The display on the 8410D set has two lines with 24 characters on each line.
The 8400 Series Voice Terminals Below is a list of the 12 default softkey features assigned to the 8410 and the order in which they appear. Table 12-10.
The 8410 Voice Terminal Table 12-11.
The 8400 Series Voice Terminals Other Physical Features Handset The 8410 voice terminal is equipped with a K-type handset. Dial Pad The 8410 voice terminal has a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users.
The 8410 Voice Terminal Wiring Information The 8410 voice terminal works in both 4-wire and 2-wire DCP configurations. The table below describes the pins on an 8400-Series voice terminal LINE jack. Table 12-12.
The 8400 Series Voice Terminals In order for the terminal to function properly in either 2-wire or 4-wire installations, there must be NO INTERCONNECTIONS between the wire pairs used for 2-wire and 4-wire operations. Bridging or paralleling of these pairs can result in damage to the terminal or can cause the PBX circuit pack to remove power to the terminal. REMOVE ALL CONNECTIONS BETWEEN PAIRS BEFORE CONNECTING THE TERMINAL.
The 8410 Voice Terminal In this instance, a 1151A1 local power supply or a 1151A2 power supply with Battery Holdover is recommended. Refer to the Adjunct Power section earlier in this manual for more information on these power supplies. Switch Administration Aliasing Use the following table for administering the 8410B (the basic) voice terminal: Table 12-14.
The 8400 Series Voice Terminals Use the following table for administering the 8410D voice terminal (with display): Table 12-15. Administering the 8410D Voice Terminal If you have this System and this Release (which can support this type of operation) Administer the 8410D as a System 75 R1V1 — R1V3 4-wire only 7405D+D System 85 R2V2 — R2V4 4-wire only 7405D+D International System 75 IR1V4, etc.
The 8410 Voice Terminal If the 8410D is administered as a 7405D, administer the 12 softkey features on “FEATURE BUTTON ASSIGNMENTS” 2 through 13; administer the Normal feature on Button #1. If the 8410D is administered as itself, administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. 8410D Menu Exit Prev 1 6 2 7 3 8 4 9 5 10 The 10 call appearance/feature buttons are administered as “BUTTON ASSIGNMENTS” 1 through 10. Next Volume Figure 12-13.
The 8400 Series Voice Terminals If the 8410D is administered as a 7405D, administer the 12 softkey features on “FEATURE BUTTON ASSIGNMENTS” 14 through 25; administer the Normal feature on Button #13. If the 8410D is administered as itself, administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. 8410D Menu Exit Prev 3 8 The 10 call appearance/feature buttons are administered as “BUTTON ASSIGNMENTS” 3 through 12. 4 9 5 10 6 11 7 12 Next Volume Figure 12-14.
The 8410 Voice Terminal UL and CSA Approval The 8410 voice terminal has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and has also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90. Hearing Aid Compatible The 8410B and 8410D voice terminals are compatible with the inductively coupled hearing aids prescribed by the FCC.
The 8400 Series Voice Terminals Tractor Feed For 100 Sets, 9 Sheets (12 Cards per Sheet) PEC: 32311 Comcode: 847161916; Laser Printer Forms (8 1/2”x11”) 67 Sheets (6 Cards per Sheet) PEC: 32312 Comcode: 847065497 Adjuncts The following adjuncts can be used with the 8410 voice terminal: ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone ■ CS201A Speakerphone ■ 7400B Plus Data Module ■ 500A Headset Adapter (and a standard headset; see “Headsets” below) ■ K6S2 Amplifier Handset ■ Sh
The 8411 Voice Terminal The 8411 Voice Terminal 8411D Display Handset Telephone Number Card Menu Exit Prev Next Volume Control Button 10 Call Appearance/ Feature Buttons Transfer Button Message Volume Shift Button Test Button Mute Button Speaker Button Shift Transfer Test Conf Mute Drop Speaker Hold Ring Hold/Ring Button Figure 12-15.
The 8400 Series Voice Terminals Analog Adjunct jack RS-232-D jack Figure 12-16. The Rear of the 8411 Voice Terminal The 8411 voice terminal is a multi-appearance digital telephone with 10 call appearance/feature buttons, four standard fixed feature buttons (CONFERENCE, DROP, HOLD, and TRANSFER), a blue SHIFT button, a MUTE button, a SPEAKER button which can access either a 2-way speakerphone or a 1-way, listen-only speaker, a TEST button, and a Volume control button.
The 8411 Voice Terminal lines for call handling, call coverage, bridging, conferencing, and sophisticated voice communications. The display set can be used by those who have a need for calling party display capabilities or who require a large number of voice terminal features. The jacks on the rear of the set allow connection of a PC for PassageWay connection and an analog device (see the list of possible analog adjuncts above).
The 8400 Series Voice Terminals The SHIFT Button The blue SHIFT button on the set can be used with the HOLD button to select your own personalized ring from among eight available patterns. (The red light next to the SHIFT button goes on steadily when the button is activated.) Call Appearance/Feature Buttons The 8411 voice terminal has 10 call appearance/feature buttons, each equipped with a red light and a green status light.
The 8411 Voice Terminal VOLUME Control Button The 8411 voice terminal has a VOLUME “arrow” button on the front of the set. This button has several functions. When the user is using the speakerphone or the 1-way speaker, the VOLUME button controls the volume of the speaker. When the user is on a call using the handset, the VOLUME button controls the handset volume. When the voice terminal is idle, the button controls the volume of the tone ringer.
The 8400 Series Voice Terminals Below is a list of the 12 default softkey features assigned to the 8411 and the order in which they appear. Table 12-16.
The 8411 Voice Terminal Table 12-17.
The 8400 Series Voice Terminals Other Physical Features Handset The 8411 voice terminal is equipped with a K-type handset. Dial pad The 8411 voice terminal is equipped with a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users.
The 8411 Voice Terminal PassageWay and Analog Adjunct Connections Connecting the 8411 to a Personal Computer for PassageWay Applications The RS-232-D jack on the 8411 voice terminal provides the user with a direct interface between an IBM-compatible personal computer and a DEFINITY switch. This connection with the PC allows access to Lucent Technologies PassageWay Solution applications.
The 8400 Series Voice Terminals The system manager may also choose to option Button #10 (again, see Figure 12-17 below for its location) so that its adjacent red and green lights provide Analog Adjunct status information. (See “Analog Adjunct Status Indications” later in this section on the 8411.) If Button #10 is optioned in this way, the button’s function changes from a call appearance/feature button to a local button that can be used to send a disconnect signal to the analog adjunct.
The 8411 Voice Terminal PassageWay Status Indications The 8411 provides the following status indications, next to Button #9 for the PassageWay connection: Table 12-18. * † PassageWay Status Indications on the 8411 Voice Terminal PassageWay Status Green light Red light AT Command Mode Off On PassageWay Mode On Off DCP Looparound Flash* Flash Switch Link Down Wink † Wink EIA Out-of-Sync Flash Off Program Mode On Flash A Flash is a repeating pattern of 500 ms ON and 500 ms OFF.
The 8400 Series Voice Terminals NOTE: When the 8411 is programmed for the Analog Adjunct to use a separate telephone line (that is, the I2-Channel), the red light is always on.
The 8411 Voice Terminal Wiring Information The 8411 voice terminal works in both 4-wire and 2-wire DCP configurations. The table below describes the pins on an 8400-Series voice terminal LINE jack. Table 12-20.
The 8400 Series Voice Terminals In order for the terminal to function properly in either 2-wire or 4-wire installations, there must be NO INTERCONNECTIONS between the wire pairs used for 2-wire and 4-wire operations. Bridging or paralleling of these pairs can result in damage to the terminal or can cause the PBX circuit pack to remove power to the terminal. REMOVE ALL CONNECTIONS BETWEEN PAIRS BEFORE CONNECTING THE TERMINAL.
The 8411 Voice Terminal Switch Administration Aliasing Use the following table for administering the 8411B (the basic) voice terminal: Table 12-22. Administering the 8411B Voice Terminal If you have this System and this Release (which can support this type of operation) System 75 R1V1 — R1V3 4-wire only 7403D System 85 R2V2 — R2V4 4-wire only 7403D International System 75 IR1V4, etc.
The 8400 Series Voice Terminals Use this table for administering the 8411D (with display) voice terminal: Table 12-23. Administering the 8411D Voice Terminal If you have this System and this Release (which can support this type of operation) System 75 R1V1 — R1V3 4-wire only 7405D+D System 85 R2V2 — R2V4 4-wire only 7405D+D International System 75 IR1V4, etc.
The 8411 Voice Terminal If the 8411D is administered as a 7405D, administer the 12 softkey features on “FEATURE BUTTON ASSIGNMENTS” 2 through 13; administer the Normal feature on Button #1. If the 8411D is administered as an 8410D, administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. 8411D Menu Exit Prev 1 6 2 7 3 8 4 9 5 10 The 10 call appearance/feature buttons are administered as “BUTTON ASSIGNMENTS” 1 through 10.
The 8400 Series Voice Terminals If the 8411D is administered as a 7405D, administer the 12 softkey features on “FEATURE BUTTON ASSIGNMENTS” 14 through 25; administer the Normal feature on Button #13. If the 8411D is administered as an 8410D, administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. 8411D Menu Exit Prev 3 8 The 10 call appearance/feature buttons are administered as “BUTTON ASSIGNMENTS” 3 through 12.
The 8411 Voice Terminal for any other analog functions such as transferring a call or setting up a conference call. If a second line on the 8411 is administered on the I-2-Channel (for analog equipment) on the 8411, type “analog” in the Data Option field on the administration screen. Power Failure Operation The 8411 voice terminal cannot be used as an emergency station during power failure transfer conditions.
The 8400 Series Voice Terminals ■ Handset cord (9 feet) Comcode: Black=105635429; White=105701809 ■ Line cord (7 feet) Comcode: 103786778 ■ Line cord (14 feet, silver) PEC: 2725-07N (COL18) Comcode: 103786828 ■ Line cord (25 feet, silver) PEC: 2725-07S (COL18) Comcode: 103786802 ■ Designation Card Cover PEC: 32309 Comcode: 846320216 ■ Button Designation Card Tractor Feed For 36 Sets, 3 Sheets (12 cards per sheet) PEC: 32310 Comcode: 847161817; Tractor Feed For 108 Sets, 9 Sheets (12 cards per sh
The 8411 Voice Terminal Headsets A list of compatible headsets, consisting of both modular and plug prong base units and selection of headpieces, appears in “Headset Adapters” in the Adjuncts section later in this manual. Additional Documents The following documents contain additional information relating to the 8411 voice terminal: (Use the 9 digit number listed after each document to order that book from the BCS Publications Center for Lucent Technologies.
The 8400 Series Voice Terminals The 8434 and 8434DX Voice Terminals 24 Call Appearance/ Feature Buttons Display 4 Softkeys 4 Display Control Buttons 8434 Handset 10 Call Appearance/ Feature Buttons Menu Exit Prev Next Volume Control Button Transfer Button Shift Button Message Volume ABC 1 Conference Button Shift GHI Test Button Test Conf Drop Button Mute Drop Speaker Hold Mute Button Handset Jack (on back of terminal) 2 Transfer Reset Spkr Speaker/ Reset Speaker Button Ring Ho
The 8434 and 8434DX Voice Terminals 4 Softkeys Display 4 Display Control Buttons Handset 10 Call Appearance Feature Buttons EX MOD Menu Exit Prev Next 24 Call Appearance/ Feature Buttons Volume Control Button Transfer Button Shift Button Conference Button Test Button Drop Button Mute Button Handset Jack (on back of terminal) Figure 12-21.
The 8400 Series Voice Terminals Softkeys Display control buttons Display Handset 10 Call appearance/ feature buttons EX MOD Menu Exit Prev Next Expansion module jack (on back of voice terminal) 24 Call appearance/ feature buttons Volume control button Transfer button Ring button Conference button Test button Drop button Mute button Speaker button Volume Ring Transfer Test Conf Mute Drop Speaker Hold ABC DEF 1 2 3 GHI JKL MNO 4 5 6 LINE PQRS TUV Line jack (on back of voice te
The 8434 and 8434DX Voice Terminals auxiliary power supply to the voice terminal. Recommended are an 1151A1 local power supply or an 1151A2 power supply with Battery Holdover. The 801A Expansion Module can be connected to the 8434DX voice terminal to provide 24 additional call appearance/feature buttons. The 801A can be used ONLY with the 8434DX voice terminal and the terminal must be connected to a DEFINITY G3V3.3 (or later release).
The 8400 Series Voice Terminals Features Eight Fixed Feature Buttons ■ CONFERENCE (labeled CONF) button ■ DROP button ■ TRANSFER button ■ A red HOLD button ■ Either a blue SHIFT button or a RING button ■ MUTE button ■ SPEAKER button ■ TEST button The SHIFT Button All 8434 voice terminals have a blue SHIFT button. Some 8434DX voice terminals have a blue SHIFT button; others have a RING button. (See the description below.
The 8434 and 8434DX Voice Terminals Speakerphone (Listen and Speak) Feature The 8434 and 8434DX voice terminals are equipped with a built-in speakerphone. The Speakerphone capability allows a user to engage in a hands-free 2-way conversation with the far-end party. The speakerphone can be turned off or on with the SPEAKER button, can be muted with the MUTE button, and the volume can be controlled with the VOLUME “arrow” button.
The 8400 Series Voice Terminals speakerphone, whichever is being used. When the user is on a call using the handset, the VOLUME button controls the handset volume. When the voice terminal is idle, the VOLUME control button adjusts the tone ringer. When the user sets the volume for the speaker, speakerphone, handset, or the tone ringer, the display on the voice terminal shows a “bar array” that indicates the volume setting.
The 8434 and 8434DX Voice Terminals Below is a list of the 15 default softkey features assigned to the 8434 and 8434DX and the order in which the features appear. Table 12-24.
The 8400 Series Voice Terminals Table 12-25.
The 8434 and 8434DX Voice Terminals Other Physical Features Handset The 8434 and 8434DX voice terminals are equipped with a K-type handset. Dial pad The 8434 and 8434DX voice terminals are equipped with a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on your dial pad has raised bars for visually-impaired users.
The 8400 Series Voice Terminals Wiring Information The 8434 and 8434DX voice terminals work in both 4-wire and 2-wire DCP configurations. The table below describes the pins on an 8400-Series voice terminal LINE jack. Table 12-26.
The 8434 and 8434DX Voice Terminals In order for the terminal to function properly in either 2-wire or 4-wire installations, there must be NO INTERCONNECTIONS between the wire pairs used for 2-wire and 4-wire operations. Bridging or paralleling of these pairs can result in damage to the terminal or can cause the PBX circuit pack to remove power to the terminal. REMOVE ALL CONNECTIONS BETWEEN PAIRS BEFORE CONNECTING THE TERMINAL.
The 8400 Series Voice Terminals auxiliary power source to the voice terminal. Recommended local power supplies are the 1151A1 power supply and the 1151A2 power supply with Battery Holdover. The 1145A and 1145B1 are recommended bulk power supplies. See the section titled Adjunct Power earlier in this manual for more information about these power supplies.
The 8434 and 8434DX Voice Terminals CAVEATS The 8434 and 8434DX may be aliased as a 7405+D+F to support features on all systems. However, in this case, while all the call appearance/feature buttons AND the softkey features will be functional, there can be a maximum of only 10 call appearances. On the 7405, the Display Module is a 1-line display, and thus the 1-line display option should be selected. On some systems, the 8434 and 8434DX can be aliased as a 7434+D or a 7444 to support coverage.
The 8400 Series Voice Terminals If administered as a 7405D, administer the 15 softkey features as “FEATURE MODULE BUTTON ASSIGNMENTS” 2 through 16. Administer the Normal feature on Button #1 on the “DISPLAY BUTTON ASSIGNMENTS” screen. If administered as itself, administer the 15 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 15.
The 8434 and 8434DX Voice Terminals If administered as a 7405D, administer the 15 softkey features as “FEATURE MODULE BUTTON ASSIGNMENTS” 2 through 16. Administer the Normal feature on Button #1 on the “DISPLAY BUTTON ASSIGNMENTS” screen. If administered as itself, administer the 15 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 15.
The 8400 Series Voice Terminals FCC Registration These voice terminals are FCC-registered along with the switch (as a system), but do not have a separate FCC registration label. UL and CSA Approval These voice terminals have been tested and have met the Underwriters Laboratories (UL) Standards UL 1459 and have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90.
The 8434 and 8434DX Voice Terminals ■ Small Designation Card Cover (for 10 buttons on left of terminal) PEC: 32309 Comcode: 846320216 ■ Large Designation Card Cover (for 24 buttons on right of terminal) PEC: 32314 Comcode: 847037553 ■ Small Button designation card (for 10 buttons on left of terminal) Tractor Feed For 25 Sets, 3 Sheets (12 cards per sheet) PEC: 32310 Comcode: 847161817; Tractor Feed For 100 Sets, 9 Sheets (12 cards per sheet) PEC: 32311 Comcode: 847161916 ■ Large Button designation c
The 8400 Series Voice Terminals Headsets A list of compatible headsets, consisting of both modular and plug prong base units and selection of headpieces, appears in “Headset Adapters” in the Adjuncts section later in this manual. Additional Documents The following documents contain additional information relating to the 8434DX voice terminal: (Use the 9-digit number listed after each document to order that book from the BCS Publications Center for Lucent Technologies.
CALLMASTER Voice Terminals 13 This section describes the following CALLMASTER voice terminals: ■ CALLMASTER voice terminal ■ CALLMASTER II voice terminal ■ CALLMASTER III voice terminal ■ CALLMASTER IV voice terminal ■ CALLMASTER V voice terminal ■ CALLMASTER VI voice terminal Issue 11 December 1999 13-1
CALLMASTER Voice Terminals The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals Transfer Button Conference Button Drop Button Message Light 1 2 3 4 5 6 7 8 9 10 1 7 13 Conference Transfer Drop Hold 2 8 14 1 ABC 2 DEF 3 3 9 15 GHI 4 JKL 5 MNO 6 4 10 16 PRS 7 TUV 8 WXY 9 5 11 * Oper O Mute # 12 6 Message 17 Release 18 CALLMASTER Dial Pad Hold Button Figure 13-1.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals Transfer Button Conference/Ring Button Display Hold Button Headset Adapter Jack (on right side of terminal) Drop/Test Button Message Light Conference Ring Transfer Drop Hold 6 Call Appearance/ Feature Buttons Test Headset Adapter Jack (on left side of terminal) Message 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 Oper O # * Select Button Select Volume 15 Feature B
CALLMASTER Voice Terminals Conference/ Ring Button Message Light Transfer Button Volume Control Buttons Select Drop/ Button Test Button Hold Button Display 6 Call Appearance/ Feature Buttons CALLMASTER IV Select Volume Conference Ring Transfer Message Drop Test 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 O # * Mute Mute Button Log In Release Log In Release Button Button Dial Pad Figure 13-3.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals Display Telephone Notepad Menu Exit Prev Mute button Tel # rSpeaker button Transfer/Test button Redial button Conf/Ring button Speaker Mute Hold Redial Transfer Conf Test ABC CALLMASTER V Volume control button Figure 13-4.
CALLMASTER Voice Terminals LINE Jack (on rear of set) EIA/TIA Data Jack (on rear of set) CALLMASTER VI 3 Feature Buttons Headset On/Off Button Mute Button Headset On / Off Mute Message a= b= 2 Call Appearance Buttons Release Release Button Headset Jack Figure 13-5. Headset Jack The CALLMASTER VI Voice Terminal The CALLMASTER is a multi-appearance digital voice terminals used primarily as a Call Management or Automatic Call Distribution (ACD) position.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals There are several types of CALLMASTER voice terminals: ■ The 602 CALLMASTER comes in two models: the 602A and the 602D. Although both of these models are the same in appearance, the 602D CALLMASTER has a Recorder Interface which allows you to connect the voice terminal to a recording device so that you can record all voice interactions. The 602A does not have a recording interface.
CALLMASTER Voice Terminals The CALLMASTER IV set also has six call appearance/feature buttons, each with a red and green light, and 15 feature-only buttons, each with a green status light. At the bottom of the CALLMASTER IV is a MUTE button, a LOG IN and RELEASE button used for processing ACD calls.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals Special Operational Characteristics The CALLMASTER voice terminals do not have a physical switchhook or handset cradle (although a handset cradle kit can be ordered separately). These sets are on-hook when there is no headset plugged physically into either of the two headset jacks. The voice terminals are off-hook when one or more headsets are plugged into one of the headset jacks.
CALLMASTER Voice Terminals The following are the approximate dimensions for the CALLMASTER V: Width = 10.35 inches (26.35 cm) Depth (front to back) = 8.5 inches (21.59 cm) Height (with deskstand and handset in place) = 4.75 inches (12.07 cm) The dimensions directly below for the CALLMASTER VI are also approximate.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals the top feature button on the CALLMASTER VI, has a green status light associated with it. These buttons can be used for features assigned during administration. NOTE: The CALLMASTER V does not have any Feature-Only buttons. Listen-Only SPEAKER Only the CALLMASTER V has a one-way, listen-only speaker.
CALLMASTER Voice Terminals When the user sets the volume for the headset or handset or for the tone ringer on the CALLMASTER II and III, IV, or on the CALLMASTER V, the display on the voice terminal shows a “bar array” that indicates the volume setting. LOG IN and RELEASE buttons On the CALLMASTER II, CALLMASTER III, and CALLMASTER IV, the LOG IN and RELEASE buttons are located in the bottom row of feature buttons.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals CALLMASTER is administered as a 7405D with a D401 display, as a 7406D, or as any other set with a 1-line display format. The default is the 2-line display. To change this setting, see the DEFINITY ECS CALLMASTER II, CALLMASTER III, and CALLMASTER IV Voice Terminals Instructions for Programming the Options, 555-015-172.
CALLMASTER Voice Terminals Cords A D8W-87 line cord and a Handset cord are provided with all CALLMASTER voice terminals. An EIA/TIA Data cord is also shipped in the box with the CALLMASTER VI set. Kneewell Adapter (602 CALLMASTER only) An optional adapter is available for connecting two headsets or handsets to the 602 CALLMASTER. This adapter allows the handset or headset to be connected without the cords running across the top of the desk.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals Table 13-1.
CALLMASTER Voice Terminals 4-WIRE installations MUST ONLY have PBX connections on pair 2 and pair 3 and, if necessary, auxiliary power must be connected to pair 4. 2-WIRE installations MUST ONLY have PBX connections on pair 1 and, if necessary, auxiliary power must be connected to pair 4. Wiring Note for the CALLMASTER VI All wiring between the DEFINITY ECS and the CALLMASTER VI, including the line cord, must consist of twisted pairs. Twisted-pair wiring makes lines less sensitive to crosstalk.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals Distance Limitations for the CALLMASTER V and CALLMASTER VI In a 2-wire installation, the CALLMASTER V and the CALLMASTER VI is connected to a TN2181 port board located in a cabinet with DEFINITY G3 Release 6.1 or later software.
CALLMASTER Voice Terminals The CALLMASTER V and VI are supported only with a DEFINITY G3 Release 6.1. Figures 13-6 and 13-7 show button numbering for the 602 CALLMASTER. Figure 13-8 shows button numbering for the CALLMASTER II and III. Figure 13-9 shows button numbering for the CALLMASTER IV. Figure 13-10 shows button numbering for the CALLMASTER V. Figure 13-11 shows button numbering for the CALLMASTER VI.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals 3 5 6 7 8 8 9 10 11 12 13 19 25 14 20 26 Conference Transfer Drop Hold 1 ABC 2 DEF 3 15 21 27 GHI 4 JKL 5 MNO 6 16 22 28 PRS 7 TUV 8 WXY 9 17 23 29 24 30 * Oper O # Mute 18 Button Assignments 3-12 Feature Button Assignments 13-30 Message NOTE: The Hold Button is Button #1. The Message Light is Button #2. The Mute Button is Button #18. Figure 13-7.
CALLMASTER Voice Terminals Conference Ring Transfer 1 2 3 Drop Hold 4 5 6 1 7 13 2 8 14 3 9 15 4 10 16 5 11 17 Test Button Assignments 1-6 Message 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 Oper O # * Select Volume Mute* 6 Log In* 12 Feature Button Assignments 1-18 Release* 18 *Feature Button #6 is preassigned as a Mute Button. Administer Feature Button #12 as a Log In Button and Feature Button #18 as a Release Button. Figure 13-8.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals CALLMASTER IV Select Volume Conference Ring Transfer 1 2 3 Hold 4 5 6 1 7 13 2 8 14 3 9 15 4 10 16 5 11 17 Message Drop Test 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 WXYZ 9 * Figure 13-9.
CALLMASTER Voice Terminals Administer the 12 softkey features on “SOFTKEY BUTTON ASSIGNMENTS” 1 through 12. Menu Exit Prev Next Tel # Speaker Redial Mute Hold Transfer Conf Test ABC 1 2 GHI JKL 4 5 PQRS TUV 7 8 * O Ring DEF 3 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 16 MNO 6 WXYZ 9 # Volume Administer the first column of 8 call appearance/ features buttons as “BUTTON ASSIGNMENTS” 1 - 8. Figure 13-10.
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals CALLMASTER VI 1 2 3 Headset On / Off Mute Message 6 a= 7 b= 8 Release 9 Figure 13-11. Button Numbering for Administering the CALLMASTER IV Voice Terminal Connected to a DEFINITY ECS G3 Release 6.1 or Later Power Failure Operation The CALLMASTER voice terminals cannot be used as an emergency station during power failure transfer conditions.
CALLMASTER Voice Terminals CALLMASTER Equipment PECs and Comcodes The CALLMASTER voice terminals and optional components can be ordered with the following PECs and Comcodes: ■ Basic 602A1 CALLMASTER Voice Terminal Black—3179-001 CLR03 Misty cream—3179-001 CLR22 ■ Basic 602D1 CALLMASTER Voice Terminal Black—3179-002 CLR03 Misty cream—3179-002 CLR22 ■ Basic CALLMASTER II Voice Terminal with Recorder Interface Black—3179-102 CLR03; Comcode: 106693294 Misty cream—3179-102 CLR22; Comcode: 106693302 White—3
The CALLMASTER, CALLMASTER II, CALLMASTER III, CALLMASTER IV, CALLMASTER V, and CALLMASTER VI Voice Terminals ■ Designation card covers (for CALLMASTER V) Package of 25: 108272402 ■ Notepad covers (for CALLMASTER V) Package of 25: 108573304 ■ Notepads (with 9 Notepads per sheet – 8-1/2” x 11”) Package of 25: 108562570 ■ Velcro strips (for CALLMASTER VI) Package of 25: 847976479 ■ Handset D-Kit #182083 (black, for CALLMASTER II, CALLMASTER III, and CALLMASTER IV) Comcode: 105514798 ■ Handset D-Ki
CALLMASTER Voice Terminals Headsets A list of compatible headsets, consisting of both modular and plug prong base units and selection of headpieces, appears in “Headset Adapters” in the Adjuncts section later in this manual.
The 500 and 2500 Series Telephones 14 The following 500 and 2500 Series Telephones are described in this section: ■ 500-Series telephone ■ 2500 DMGC telephone ■ 2500 YMGK telephone ■ 2500 MMGL, 2500 MMGM, 2500 YMGL, and 2500 YMGM telephones ■ 2554 MMGM and 2554 YMGM telephones ■ 2500 MMGN and 2500 YMGP telephones ■ 2554 MMGN and 2554 YMGP telephones Issue 11 December 1999 14-1
The 500 and 2500 Series Telephones The 500 Series Telephone Figure 14-1. The 500 Series Telephone The 500 telephone is a single appearance analog rotary dial telephone which provides cost-effective service wherever it is located. However, note that it provides limited access to features because the rotary dial has no * or # positions. Applications The 500 telephone can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85.
The 500 Series Telephone Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front to back) = 8-3/4 inches Height (maximum with handset in place) = 5-1/2 inches Physical Features Handset The 500 telephone is equipped with a G-type handset. Dial pad The 500 telephone has a 10-hole rotary dial. Jacks The 500 telephone housing contains two jacks. The handset cord jack is on the left side of the telephone. The line jack is on the back of the telephone.
The 500 and 2500 Series Telephones Distance Limitations The maximum allowable distances of a 500 telephone from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 14-1.
The 500 Series Telephone 500-Series Telephone Equipment PECs The 500 telephone and optional components can be ordered with the following PECs: ■ Basic 500 Telephone (black) — 3100-0RD COL09 ■ Basic 500 Telephone (beige) — 3100-0RD COL11 ■ Basic 500 Telephone for use with the 4A speakerphone (black) — 3100-2RD COL09 ■ Basic 500 Telephone for use with the 4A speakerphone (beige) — 3100-0RD COL11 ■ Handset cord (12 feet, black) — 2725-01L COL09 ■ Line cord (14 feet, silver) — 2725-07N COL18 ■ Lin
The 500 and 2500 Series Telephones The 2500 Series Telephones Handset 1 GHI 4 Dial Pad PQRS 7 ABC 2 JKL 5 TUV 8 Oper * O DEF 3 MNO 6 WXYZ 9 # Telephone Number Card Figure 14-2.
The 2500 Series Telephones ABC DEF 2 3 GHI JKL MNO 4 5 6 PRS TUV WXY 8 9 1 Handset 7 * Oper O Dial Pad # Telephone Number Card Figure 14-3.
The 500 and 2500 Series Telephones Message Waiting Light Handset 1 GHI 4 Dial Pad PQRS 7 ABC 2 JKL 5 TUV 8 Oper * O DEF 3 MNO 6 WXYZ 9 # Message Waiting Adjunct Telephone Number Card Figure 14-4. The 2500 Telephone with Message Waiting Adjunct The 2500 Series telephones consist of single appearance analog telephones with conventional touch-tone dialing. These telephones provide access to features through the use of the * or # dial pad keys and the appropriate feature access codes.
The 2500 Series Telephones Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front to back) = 8-3/4 inches Height (maximum with handset in place) = 5-1/2 inches Features RECALL button The 2500 MMGK is equipped with a Timed Recall button. This button provides access to a second dial tone (if provided) without disconnecting the first call.
The 500 and 2500 Series Telephones Mounting Options The 2500 Series telephones are all desk mounted with the exception of the 2554 MMGJ which is wall-mounted only. Color Options The 2500 Series telephones are available in several colors. ■ The 2500 MMGJ telephone is available in black, beige, and ivory. ■ The 2500 MGK telephone is available in black and misty cream. ■ The 2554 MMGJ telephone is available in black and misty cream. ■ The 2500 SM telephone is available in black, beige, and ivory.
The 2500 Series Telephones Power Requirements The 2500 Series telephone is powered by the tip and ring leads. It does not require any external power supply. Power Failure Operation The 2500 Series telephone can be used as an emergency station during power failure transfer conditions. FCC Registration The 2500 Series telephone is FCC registered.
The 500 and 2500 Series Telephones The 2500 DMGC Telephone Handset 1 GHI 4 Message Waiting Light PQRS 7 R ABC 2 JKL 5 TUV 8 Oper * O DEF 3 MNO 6 WXYZ 9 # Volume Control Telephone Number Card Recall (R) Button Dial Pad Figure 14-5. The 2500 DMGC Telephone The 2500 DMGC telephone is a single appearance analog telephone with conventional touch-tone dialing. It provides access to features through the use of the * or # dial pad keys and the appropriate feature access codes.
The 2500 DMGC Telephone Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front to back) = 8-3/4 inches Height (maximum with handset in place) = 5-1/2 inches Features RECALL button The RECALL button performs the same function as flashing the switchhook. Message light The red Message light blinks when you have a message. Other Physical Features Handset The 2500 DMGC telephone is equipped with a G-type handset.
The 500 and 2500 Series Telephones Mounting Options The 2500 DMGC telephone can only be desk-mounted. Color Options The 2500 DMGC telephone is available in black or ivory. Distance Limitations The maximum allowable distances of a 2500 DMGC telephone from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 14-3.
The 2500 DMGC Telephone 2500 DMGC Equipment PECs The 2500 DMGC Voice Terminals and optional components can be ordered with the following PECs: ■ 2500 DMGC Basic Telephone (black) — 3178-SYSB ■ 2500 DMGC Basic Telephone (ivory) — 3178-SYSI ■ Handset cord (12 feet, black) — 2725-01L COL09 ■ Line cord (14 feet, silver) — 2725-07N COL18 ■ Line cord (25 feet, silver) — 2725-07S COL18 Adjuncts The 2500 DMGC telephone is not compatible with any adjuncts.
The 500 and 2500 Series Telephones The 2500 YMGK Telephone Recall Button Message Light Figure 14-6. The 2500 YMGK Telephone The 2500 YMGK telephone is a single appearance analog telephones with conventional touch-tone dialing. It is equipped with a RECALL button and a Message Waiting light. It provides access to features through the use of the * or # dial pad keys and the appropriate feature access codes.
The 2500 YMGK Telephone Physical Description Dimensions NOTE: The following dimensions for the 2500 YMGK telephone are approximate. Width = 7 inches Depth (front to back) = 8-3/4 inches Height (maximum with handset in place) = 5-1/2 inches Features RECALL button The RECALL button performs the same function as flashing the switchhook. Message light The red Message light flashes when a message has been left, and flutters when a call is being received.
The 500 and 2500 Series Telephones Ringing The 2500 YMGK telephone has electronic tone ringer. The volume control is located on the bottom of the telephone. Mounting Options The 2500 YMGK telephone is desk-mounted. Color Options The 2500 YMGK telephone is available in black or misty cream. Distance Limitations The maximum allowable distances of a 2500 YMGK telephone from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 14-4.
The 2500 YMGK Telephone Power Failure Operation The 2500 YMGK telephone can be used as an emergency station during power failure transfer conditions. FCC Registration The 2500 YMGK telephone’s FCC registration number is AS593M-17899-TE-T.
The 500 and 2500 Series Telephones The 2500 MMGL and 2500 YMGL, 2500 MMGM and 2500 YMGM, and 2554 MMGM and 2554 YMGM Telephones Line Jack (on back of phone) Handset 1 GHI 4 Dial Pad PQRS 7 ABC 2 JKL 5 TUV 8 Oper * O DEF 3 MNO 6 WXYZ 9 # Telephone Number Card Handset Cord Jack Figure 14-7.
The 2500 MMGL and 2500 YMGL, 2500 MMGM and 2500 YMGM, and 2554 MMGM and 2554 YMGM Telephones Line Jack (on back of phone) Handset 1 GHI 4 Dial Pad PQRS 7 ABC 2 JKL 5 TUV 8 Oper * Message O DEF 3 Mute MNO Flash Mute Button 9 Redial Flash Button # Hold 6 WXYZ Redial Button Hold Hold Button Hold Light Handset Cord Jack Message Light Figure 14-8.
The 500 and 2500 Series Telephones Positive Disconnect Switch* Tone/Pulse Switch* Dial Pad Ringer Volume Control ABC DEF 1 2 3 GHI JKL 4 5 6 PQRS TUV WXYZ 7 8 9 RE DIAL # HOLD OPER * O MNO MUTE Mute Button** FLASH Flash Button** Message Light** Redial Button** Hold Button** Hold Light** Message Hold Telephone Number Card Handset Jack ** These five buttons and the Message light appear ONLY on the 2554 YMGM. Figure 14-9.
The 2500 MMGL and 2500 YMGL, 2500 MMGM and 2500 YMGM, and 2554 MMGM and 2554 YMGM Telephones Applications The 2500 MMGL, 2500 YMGL, 2500 MMGM, 2500 YMGM, 2554 MMGM, and 2554 YMGM telephones can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. These 2500 Series telephones are especially suitable for manufacturing, warehousing, guard stations, or power failure locations.
The 500 and 2500 Series Telephones FLASH button The FLASH button performs the same function as flashing the switchhook; that is, it provides access to system features or use of custom calling services that require a press of the switchhook. REDIAL button The REDIAL button is used to dial the last number dialed (up to 28 digits). HOLD button The HOLD button is used to put a call on hold. Below the HOLD button, there is a red light. When the user puts a call on hold, the light goes on.
The 2500 MMGL and 2500 YMGL, 2500 MMGM and 2500 YMGM, and 2554 MMGM and 2554 YMGM Telephones Cords Two cords are supplied with all four of these 2500 Series model telephones: a coiled 6-foot modular handset cord and a 7-foot modular line cord. Optional longer cords are available: a 12-foot handset cord, and 14-foot and 25-foot line cords. Ringing All of these 2500 Series telephones have an electronic tone ringer. There is a 3-position ringer volume control located on the bottom of the telephone.
The 500 and 2500 Series Telephones Power Requirements All of these 2500 Series telephones are powered by the tip and ring leads. These telephones do not require any external power supply. Switch Administration These 2500 series telephones must be administered in the following ways: ■ If the 2500 MMGL, 2500 YMGL, 2500 MMGM, 2500 YMGM, 2554 MMGM, or 2554 YMGM telephone is connected to a System 75, DEFINITY G1 or G3, or a DEFINITY ECS, it must be administered as a 2500 analog telephone.
The 2500 MMGL and 2500 YMGL, 2500 MMGM and 2500 YMGM, and 2554 MMGM and 2554 YMGM Telephones 2500 MMGL and 2500 YMGL Equipment PECs The 2500 MMGL and 2500 YMGL telephones can no longer be ordered.
The 500 and 2500 Series Telephones The 2500 MMGN and 2500 YMGP and 2554 MMGN and 2554 YMGP Telephones Line Jack (on back of phone) Handset Handset Volume Buttons Dial Pad 1 2 3 4 5 6 Mute Button* 7 8 9 Flash Button* * O # Redial Button* Hold Button* Hold Light* Handset Cord Jack Message Light* Telephone Number Card * These buttons and lights appear ONLY on the 2500 YMGP. Figure 14-10.
The 2500 MMGN and 2500 YMGP and 2554 MMGN and 2554 YMGP Telephones Ringer Volume Control Dial Pad ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 OPER Message Light* * O MUTE Mute Button* FLASH Flash Button* 9 REDIAL Redial Button* # HOLD Hold Button* Hold Light* Message Volume Hold Volume Buttons Telephone Number Card Handset jack * These five buttons and the Message light appear ONLY on the 2554 YMGP. Figure 14-11.
The 500 and 2500 Series Telephones Applications The 2500 MMGN, 2500 YMGP, 2554 MMGN, and 2554 YMGP telephones can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. These 2500 Series telephones are especially suitable for manufacturing, warehousing, guard stations, or power failure locations. Physical Description Dimensions NOTE: The following dimensions for the four 2500 desk models are approximate. Width = 5.
The 2500 MMGN and 2500 YMGP and 2554 MMGN and 2554 YMGP Telephones FLASH button The FLASH button performs the same function as flashing the switchhook; that is, it provides access to system features or use of custom calling services that require a press of the switchhook. REDIAL button The REDIAL button is used to dial the last number dialed (up to 28 digits). HOLD button The HOLD button is used to put a call on hold. Below the HOLD button, there is a red light.
The 500 and 2500 Series Telephones Ringing All of these 2500 Series telephones have an electronic tone ringer. There is a 3-position ringer volume control located on the bottom of the telephone.There are three settings on the volume control: High, Low, and Off. Mounting Options The 2500 MMGN and 2500 YMGP telephones can only be desk-mounted. They cannot be wall-mounted. The 2554 MMGN and 2554 YMGP telephones are wall model telephones.
The 2500 MMGN and 2500 YMGP and 2554 MMGN and 2554 YMGP Telephones Switch Administration These 2500 series telephones must be administered in the following ways: ■ If the 2500 MMGN, 2500 YMGP, 2554 MMGN, or 2554 YMGP telephone is connected to a System 75, DEFINITY G1 or G3, or a DEFINITY ECS, it must be administered as a 2500 analog telephone. ■ If any of these 2500 Series telephones is connected to a System 85 or a DEFINITY G2, it can be administered as an analog line.
The 500 and 2500 Series Telephones 2500 MMGN and 2500 YMGP Equipment PECs The 2500 MMGN, 2500 YMGP, 2554 MMGN, and 2554 YMGP telephones and optional components can be ordered with the following PECs: ■ 2500 MMGN Basic Telephone Black set — PEC: 3101-KBD COL003 Comcode: 108209016 Misty cream set — PEC: 3101-KBD COL215 Comcode: 108209024 ■ 2500 YMGP Basic Telephone Black set — PEC: 3101-KFD COL003 Comcode: 108209032 Misty cream set — PEC: 3101-KFD COL215 Comcode: 108209040 ■ 2554 MMGN Basic Telephone Bl
The 6200 Series Telephones 15 The following 6200 Series telephones are described in this section: ■ 6210 telephone ■ 6218 telephone ■ 6220 telephone Issue 11 December 1999 15-1
The 6200 Series Telephones The 6210 Telephone DATA jack Ringer volume control Handset 6210 Message light Handset cord jack ABC Flash button Redial button Hold button Flash 1 2 3 GHI JKL MNO 4 PQRS Redial Hold DEF 5 6 TUV WXYZ 7 8 9 * 0 # Handset volume control Dial pad LINE jack (on bottom of telephone) Figure 15-1. The 6210 Telephone The 6210 telephone is a single-line analog model that requires one tip and ring pair for operation.
The 6210 Telephone Applications The 6210 telephone can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. The telephone has local phone features such as Hold and Redial, and can also be used for the system features with the FLASH button. Physical Description Dimensions NOTE: The dimensions listed here for the 6210 telephone are approximate. Width = 6.57 inches (16.69 cm) Depth (front to back) = 8.8 inches (22.
The 6200 Series Telephones The user can also select one of two different ringing patterns. The two ringing pattern settings are labeled (choose one or the other) and located on the rear of the telephone. Touch-Tone Dialing The 6210 telephone has only Touch-Tone Dialing. No special setting is needed to engage this feature. Timed Disconnect The 6210 supports the Timed Disconnect feature. No special setting is needed to engage this feature.
The 6210 Telephone Distance Limitations The maximum allowable distances of a 6210 telephone from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 15-1.
The 6200 Series Telephones Ringer Equivalency Numbers The Ringer Equivalency Number for the 6210 is: AC REN 0.7A, 1.6B FCC Registration The 6210 telephone is FCC registered. The Registration Number of the 6210 is: AS5CHN-25251-MT-E. Hearing Aid Compatible This telephone is compatible with the inductively coupled hearing aids approved by the FCC.
The 6210 Telephone Additional Documents The following documents contain additional information relating to the 6210 telephone: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The 6200 Series Telephones The 6218 and 6220 Telephones DATA jack Personalized Ring Handset Ringer volume control 10 Programmable Dialing buttons 6220 Program button Program Pause button Pause Tel.# Message light Handset cord jack Handset volume control Flash button Redial button Hold button Flash Redial Hold ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * 0 # LINE jack (on bottom of telephone) Figure 15-2.
The 6218 and 6220 Telephones DATA jack Personalized Ring Handset Ringer volume control 10 Programmable Dialing buttons 6220 Program button Mute button Program Pause button Pause Tel.# Message light Handset cord jack Mute Handset volume control ABC Flash button Flash Redial button Redial Hold button Spkr Hold Speakerphone button DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * 0 # Dial pad LINE jack (on bottom of telephone) Figure 15-3.
The 6200 Series Telephones Physical Description Dimensions NOTE: The dimensions listed here for the 6218 and 6220 telephones are approximate. Width = 6.57 inches (16.69 cm) Depth (front to back) = 8.8 inches (22.35 cm) Height (maximum with handset in place) = 3.3 inches (8.38 cm) Feature Buttons Fixed Feature Buttons Both the 6218 and the 6220 telephones have the following fixed feature buttons: ■ FLASH button For using features such as Conference with business communications systems.
The 6218 and 6220 Telephones ■ PROGRAM and PAUSE buttons The PROGRAM button is used for storing numbers on the programmable dialing buttons on the upper half of the faceplate of the telephone. The PAUSE button can be used to insert a one half second pause/delay into a telephone number stored on a programmable dialing button. In addition, the 6220 telephone has the following two features: ■ SPEAKERPHONE button For accessing the built-in speakerphone and microphone combination.
The 6200 Series Telephones Dial pad The 6218 and 6220 telephones are equipped with a 12-button touch-tone dial pad. The letters “Q” and “Z” have been added to the appropriate dial pad keys for directory access, and the “5” button on the dial pad has raised bars for visually-impaired users. Cords Two cords are supplied with the 6218 and 6220 telephone: a coiled 9-foot modular handset cord and a 7-foot modular line cord. Color Options The 6218 and 6220 telephones are available in black and in white.
The 6218 and 6220 Telephones Switch Administration The 6218 and 6220 telephones must be administered in the following ways: ■ If the telephone is connected to a System 75, DEFINITY G1 or G3, or a DEFINITY ECS, it must be administered as a 2500 analog telephone with Message Waiting. ■ If the telephone is connected to a System 85 or DEFINITY G2, it can be administered as an analog line.
The 6200 Series Telephones ■ Handset Comcode: White=108216185; Gray=108216193 ■ Handset cord (9 feet) Comcode: White=407632835; Gray=407632850 ■ Line cord (7 feet) Comcode: 105642980 ■ Line cord (14 feet, silver) PEC: 2725-07N (COL18) Comcode: 103786802 ■ Line cord (25 feet, silver) PEC: 2725-07S (COL18) Comcode: 103786828 ■ Programmable Dialing Button designation cards Single sheet Comcode: 848033932 The details of multiple-card packages have not yet been designated.
The 8100 Series Telephones 16 The following 8100 Series telephones are described in this section: ■ 8101 and the 8101M telephones ■ 8102 and the 8102M telephones ■ 8110 and the 8110M telephones Issue 11 December 1999 16-1
The 8100 Series Telephones The 8101 and 8101M Telephones Data Jack (on rear of housing) Handset 8101 Positive Disconnect (on right side of telephone) Labeling Designation Card Ringer Volume Control (on right side of telephone) THIS NUMBER Flash Button Flash Handset Jack Redial Hold ABC DEF GHI JKL MNO 4 5 1 PQRS 7 * 2 TUV 8 OPER O 16-2 The 8101 Telephone Issue 11 December 1999 Redial Button Hold Light Hold Button 3 Reversible Stand (on bottom of telephone) Message Light 6 W
The 8101 and 8101M Telephones Data Jack (on rear of housing) Handset 8101 Designation Card THIS NUMBER Ringer Volume Control (on right side of telephone) Flash 1 GHI 4 PQRS 7 * Flash Button Figure 16-2. ABC DEF JKL MNO 2 5 TUV 8 OPER O 3 Reversible Stand (on bottom of telephone) 6 WXYZ 9 # Message Light Message Dial Pad The 8101M Telephone The 8101 and 8101M telephones are single-line analog models that require one tip and ring pair for operation.
The 8100 Series Telephones Applications The 8101 and 8101M telephones can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. These telephones have local phone features, but can also be used for the system features with the FLASH button. Physical Description Dimensions NOTE: The dimensions listed here for the 8101 and 8101M telephones are approximate.
The 8101 and 8101M Telephones Other Physical Features Ringing The 8101 and 8101M telephones have electronic tone ringing. The ringer volume control is a 3-position switch on the right side of the housing. Positive Disconnect The 8101 telephone has a switch with which the user can select positive disconnect or turn it off. In the ON position, this switch hangs up the phone for approximately two seconds, even if the switchhook depression is for a shorter duration.
The 8100 Series Telephones Distance Limitations The maximum allowable distances of an 8101 or 8101M telephone from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 16-1.
The 8101 and 8101M Telephones Ringer Equivalency Numbers The Ringer Equivalency Number for the 8101 and 8101M telephones is: REN 0.4A, 0.8B. FCC Registration The 8101 and 8101M telephones are FCC registered (AS5CHN-20714-MT-E). Hearing Aid Compatible These two telephones are compatible with the inductively coupled hearing aids prescribed by the FCC.
The 8100 Series Telephones ■ Designation card covers Comcode: 847173937 Adjuncts The 8101 and 8101M telephones do not have an Adjunct equipment jack and therefore will not support any adjuncts. Additional Documents The following documents contain additional information relating to the 8101 and 8101M telephone: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The 8102 and 8102M Telephones The 8102 and 8102M Telephones Data Jack (on rear of housing) Adjunct (equipment) Jack (on rear of housing) 8102 Program Button PROGRAM Pause Button PAUSE Handset Ringer Tone Selectors (on side of voice terminal) 12 Programmable Dialing Buttons THIS NUMBER Flash Button Flash Handset Jack Redial Hold ABC DEF GHI JKL MNO 4 5 1 2 PQRS 7 * TUV 8 OPER O Ringer Volume Control (on side of voice terminal) 3 Adjunct Power Jack (on back of voice terminal)
The 8100 Series Telephones a HOLD button, a Data jack, and an Adjunct jack. The 8102 and 8102M telephones also allow access to system features with the FLASH button and appropriate dial codes. NOTE: In late 1995, the basic 8102 telephone was no longer manufactured. Only the 8102M is available. Applications The 8102 and 8102M telephones can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85.
The 8102 and 8102M Telephones ■ REDIAL button Can be used for redialing the last number dialed from the dial pad, either an extension or an outside number. The number redialed can be up to 20 digits. With the (Redial) Auto-Pause feature, the telephone can be programmed to insert pauses after a dial access code (such as 9) in a redialed number.
The 8100 Series Telephones Mounting Options The 8102 and 8102M telephones come equipped with a non-adjustable desk stand which can be turned upside-down and used for wall mounting the telephone. Jacks The 8102 and 8102M telephones have a line jack on the back of the telephone for connecting a line cord, and a Handset cord jack for connecting the handset. These telephones also have a Data jack for connecting a device such as a modem to the telephone.
The 8102 and 8102M Telephones Distance Limitations The maximum allowable distances of an 8102 or 8102M telephone from the DEFINITY G1, G2, and G3, DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 16-2.
The 8100 Series Telephones Administration of Hidden Features For procedures on administering the hidden features on the 8102M (to be done ONLY by the system administrator) such as: ■ Reprogramming the Hold Feature ■ Administering the Timed Disconnect Feature ■ Locking the Programmable Dialing Buttons Refer to the 8101, 8101M, 8102M and 8110M Telephones Quick Reference Guide which comes in the box with the 8102M.
The 8102 and 8102M Telephones ■ Handset cord (9 feet) Comcode: Black=105635429; White=105701809 ■ Line cord (7 feet) Comcode: 103732541 ■ Line cord (14 feet, silver) PEC: 2725-07N (COL18) Comcode: 103786802 ■ Line cord (25 feet, silver) PEC: 2725-07S (COL18) Comcode: 103786828 ■ Button designation card PEC: 31932 (Package of 25) PEC: 31938 (Tractor Feed) Single Sheet Comcode: 846562700 25 Sheets Comcode: 846562718 Tractor Feed Comcode: 846562726 ■ Designation card covers PEC: 31937 (package of 2
The 8100 Series Telephones Adjuncts The 8102 and 8102M telephones can be equipped with one of the following adjuncts: ■ S101A Speakerphone (not orderable) ■ S201A Speakerphone Additional Documents The following documents contain additional information relating to the 8102 and 8102M telephones: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The 8110 and 8110M Telephones The 8110 and 8110M Telephones Auxiliary Power Jack (on rear of housing) Data Jack (on rear of housing) 8110M Program Button PROGRAM Pause Button PAUSE Handset 12 Programmable Dialing Buttons Flash Button THIS NUMBER Flash Redial Hold Speaker Button Spkr Mute Auto Handset Jack 1 Speaker Light ABC 2 GHI 4 PQRS 7 DEF 3 JKL MNO 5 6 TUV 8 Speaker Volume Control (on side of voice terminal) WXYZ 9 OPER * O Ringer Tone Selectors (on side of voice
The 8100 Series Telephones NOTE: In late 1995, the basic 8110 was no longer manufactured. Only the 8110M is available. Applications The 8110 and 8110M telephones can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. These telephones have local phone features, but can also be used for system features via the Flash button.
The 8110 and 8110M Telephones ■ REDIAL button Can be used for redialing the last number dialed from the dial pad, either an extension or an outside number. The number redialed can be up to 20 digits. With the (Redial) Auto-Pause feature, the telephones can be programmed to insert pauses after a dial access code (such as 9) in a redialed number.
The 8100 Series Telephones PROGRAM and PAUSE buttons Both of these buttons are used for storing numbers on the pre-programmed dialing buttons on the upper half of the faceplate of the telephone. The PAUSE button can be used to insert one or more one half-second pause/delay into a telephone number stored on a programmable dialing button or into a dialing access code in the (Redial) Auto-Pause feature. Other Physical Features Ringing The 8110 and 8110M telephones have electronic tone ringing.
The 8110 and 8110M Telephones Cords Two cords are supplied with the 8110 and 8110M telephones: a coiled 9-foot modular handset cord and a 7-foot modular line cord. Color Options The 8110 and 8110M telephones are available in black and in white. Distance Limitations The maximum allowable distances of an 8110 or 8110M telephone from the DEFINITY G1, G2, and G3, a DEFINITY ECS, System 75, or System 85 cabinet are shown in the table below. Table 16-3.
The 8100 Series Telephones Power Requirements It is recommended that the 8110 and 8110M telephones have auxiliary power (9V DC, 100 mA) to improve the performance of the speakerphone under the following conditions: (See the table below.) NOTE: Use with the TN746 circuit pack requires auxiliary power (in the form of a power adapter) at all loop lengths. On System 85 and DEFINITY G2, the line must be administered as Data Restricted to allow for the automatic disconnect feature. Table 16-4.
The 8110 and 8110M Telephones Switch Administration The 8110 and 8110M telephones must be administered in the following ways: ■ If the 8110 or 8110M telephone is connected to a System 75, DEFINITY G1 or G3, or a DEFINITY ECS, it must be administered as a 2500 analog telephone with Message Waiting. ■ If the 8110 or 8110M telephone is connected to a System 85 or DEFINITY G2, it can be administered as an analog line.
The 8100 Series Telephones 8110 and 8110M Telephones Equipment PECs and Comcodes The 8110 and 8110M telephones and components can be ordered with the following PECs and Comcodes: 16-24 ■ Basic 8110 (8110A01A, 8110A01B, and 8110A01C) Telephone PEC: 3193-001 (Black=COL09; White=COL10) Comcode: Black=106272321; White=106272339 ■ Modified 8110M (8110A01D) Telephone PEC: 3193-001 (Black=COL09; White=COL10) Comcode: Black=107535841; White=107535858 ■ Handset Comcode: Black=106050065; White=106053408 ■ H
The 8110 and 8110M Telephones ■ Security designation card and cover (These cards and covers are for concealing the PROGRAM and PAUSE buttons and the two topmost programmable dialing buttons so that unauthorized changes cannot be made to the programmable dialing assignments.) (Package of 25 cards and clear plastic designation card covers) PEC: 31931 Comcode: 106248370 ■ Stands (These stands can be used to replace damaged or broken stands.
The 8100 Series Telephones Additional Documents The following documents contain additional information relating to the 8110 and 8110M telephones: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center.
ISDN Voice Terminals 17 The following voice terminals described in this section are used with the Integrated Services Digital Network (ISDN) communication system: ■ ISDN 7505 modular voice terminal ■ ISDN 7506 display terminal ■ ISDN 7507 display terminal ■ ISDN 8503T voice terminal ■ ISDN 8510T voice/data terminal ■ ISDN 8520T voice/data terminal Issue 11 December 1999 17-1
ISDN Voice Terminals The ISDN 7505 Modular Terminal Handset Message Light Conference/ Ring Button 10 Call Appearance Feature Buttons Handset Cord Jack (under left side of base) 3 Shiftable Feature Buttons Message Conference Transfer Ring Drop Drop/Test Button Line Jack (on back of stand) Hold Test GHI JKL MNO Shift 6 Select PRS TUV WXY Mute Redial/Feature Button Shift/Select Button Mute Button Speaker Speaker Button 1 4 7 * ABC 2 5 8 Oper O DEF 3 Redial 9 # Volume ISD
The ISDN 7505 Modular Terminal The 7505 Modular Terminal is used with the Integrated Services Digital Network (ISDN) communication system through a 4-wire “T”-interface. The modular 7505 is a voice terminal when equipped with a Voice Only Module (VOM). As a telephone, it offers programmable buttons, fixed feature buttons, a Message light, touch-tone dialing, and a built-in, programmable speakerphone or SPOKESMAN loudspeaker.
ISDN Voice Terminals ■ TRANSFER button ■ HOLD button ■ SPEAKER button ■ MUTE button ■ REDIAL/or feature button ■ SELECT button Message Light The red Message light goes on when a message is left for the user. It goes off when the user retrieves the message. Call Appearance/Feature buttons The 7505 has nine or 10 call appearance buttons. These same 10 buttons, when properly administered, can be used for activating features.
The ISDN 7505 Modular Terminal Other Physical Features Handset The 7505 is equipped with an R-type handset. Dial pad The 7505 has a 12-button touch-tone dial pad. Jacks The 7505 housing contains three jacks. The Handset jack is located on the bottom of the 7505 and can be identified by the adjacent handset symbol. The Line jack is located on the back of the 7505.
ISDN Voice Terminals Power Requirements The 7505 requires an auxiliary power supply. The power supply can be provided at a central location or may be collocated with the 7505. If the auxiliary power supply fails or loses its power, the 7505 will provide basic voice service with the phantom power provided by the switch. Terminating Resistor A 440A4 Terminating Resistor adapter is required with the 7505. The 440A4 can be located at the work location or in the satellite closet.
The ISDN 7505 Modular Terminal Adjuncts The following adjuncts can be used with the 7505 modular terminal: ■ 500A Headset Adapter (and a standard headset; see “Headsets” below) ■ S101A Speakerphone ■ S201A Speakerphone Headsets A list of compatible headsets, consisting of both modular and plug prong base units and selection of headpieces, appears in “Headset Adapters” in the Adjuncts section later in this manual.
ISDN Voice Terminals The ISDN 7506 Voice Terminal 10 Call Appearance Feature Buttons Line Jack (on back of stand) Display Handset Display Contrast Control Message Light Conference/ Ring Button Drop/Test Button Message Conference Clock Drop Hold Test 1 Handset Cord Jack (under left side of base) 3 Shiftable Feature Buttons Transfer Ring ABC 2 3 GHI JKL MNO Redial Shift 6 Select PRS TUV WXY Mute 4 7 * 5 8 Oper O Redial/Feature Button Shift/Select Button Mute Button DEF 9
The ISDN 7506 Voice Terminal The 7506 Display terminal is used with the Integrated Services Digital Network (ISDN) communication system through a 4-wire “T”-interface. The modular 7506 is a voice terminal when equipped with a Voice Only Module (VOM). As a telephone, it offers programmable buttons, fixed feature buttons, a Message light, touch-tone dialing, and a built-in, programmable speakerphone or SPOKESMAN loudspeaker.
ISDN Voice Terminals Features Eight Fixed Feature Buttons The 7506 display terminal is equipped with eight fixed feature buttons. Four of the buttons are dual purpose buttons that are used with the SELECT button to perform other functions. ■ CONFERENCE/RING button ■ DROP/TEST button ■ TRANSFER/CLOCK button ■ SPEAKER button ■ MUTE button ■ REDIAL/or feature button ■ SELECT button Message Light The red Message light goes on when a message is left for the user.
The ISDN 7506 Voice Terminal Loudspeaker The 7506 display terminal has a built-in, programmable SPOKESMAN loudspeaker. The SPEAKER button is used to turn the loudspeaker on and off. The volume arrow buttons control the volume of the loudspeaker. Speakerphone The 7506 display terminal has a built-in, programmable speakerphone. The SPEAKER button is used to turn the speakerphone on and off. The green light next to the SPEAKER button goes on when the speakerphone is active.
ISDN Voice Terminals Color Options The base of the 7506 is always black. The top of the 7506 is available in misty cream or black. Distance Limitations The maximum signaling distance from the port board to the work location jack based on DIW 24 AWG cable is: ■ Terminating resistor in work location — 1900 feet ■ Terminating resistor in satellite closet — 1600 feet Power Requirements The 7506 display terminal requires an auxiliary power supply.
The ISDN 7506 Voice Terminal 7506 Equipment PECs The 7506 display terminal and optional components were ordered with the following PECs: ■ ISDN 7506 Voice Only Modular Display Terminal — 3196-VOM ■ ISDN 7506 Asynchronous Data Modular Display Terminal — 3196-ADM ■ 440A4 Terminating Resistor — 2709-A59 ■ ADM Upgrade Kit — 31955 ■ VOM Feature Package 2 Upgrade Kit — 31969 ■ ADM Feature Package 2 Upgrade Kit — 31970 Adjuncts The following adjunct can be used with the 7506 display terminal: ■ 500A
ISDN Voice Terminals The ISDN 7507 Display Terminal Display Transfer/Clock Button Conference/Ring Button 31 Call Appearance/ Feature Buttons Hold Button Line Jack (on back of stand) Drop/Test Button Display Contrast Control ISDN 7507 Handset Conference Ring Transfer Clock Drop Test Hold ABC DEF GHI JKL MNO PRS TUV WXY 1 4 9 Feature Buttons 7 * Handset Cord Jack (under base) Volume 2 5 8 Oper O 3 6 9 # Message Select Speaker Mute Volume Control Button Redial Select B
The ISDN 7507 Display Terminal The 7507 Display terminal is used with the Integrated Services Digital Network (ISDN) communication system through a 4-wire “T”-interface. The modular 7507 is a voice terminal when equipped with a Voice Only Module (VOM). As a telephone it offers programmable buttons, fixed feature buttons, Message light, touch-tone dialing, and a built-in, programmable speakerphone or SPOKESMAN loudspeaker.
ISDN Voice Terminals Features Eight Fixed Feature Buttons The 7507 display terminal is equipped with eight fixed feature buttons. Three of the buttons are dual purpose buttons that are used with the SELECT button to perform other functions. ■ CONFERENCE/RING button ■ DROP/TEST button ■ TRANSFER/CLOCK button ■ HOLD button ■ SPEAKER button ■ MUTE button ■ REDIAL button ■ SELECT button Message Light The red Message light goes on when a message is left for the user.
The ISDN 7507 Display Terminal Loudspeaker The 7507 display terminal has a built-in, programmable SPOKESMAN loudspeaker. The SPEAKER button is used to turn the loudspeaker on and off. The Volume arrow buttons control the volume of the loudspeaker. Speakerphone The 7507 display terminal has a built-in, programmable speakerphone. The SPEAKER button is used to turn the speakerphone on and off. The green light next to the SPEAKER button goes on when the speakerphone is active.
ISDN Voice Terminals Color Options The base of the 7507 display terminal is always black. The top of the 7507 display terminal is available in misty cream or black. Distance Limitations The maximum signaling distance from the port board to the work location jack based on DIW 24 AWG cable is: ■ Terminating resistor in work location—1900 feet ■ Terminating resistor in satellite closet—1600 feet Power Requirements The 7507 display terminal requires an auxiliary power supply.
The ISDN 7507 Display Terminal 7507 Equipment PECs The 7507 display terminal and optional components were ordered with the following PECs: ■ ISDN 7507 Voice Only Modular Display Terminal — 3197-VOM ■ ISDN 7507 Asynchronous Data Modular Display Terminal — 3197-ADM ■ 440A4 Terminating Resistor — 2709-A59 ■ ADM Upgrade Kit — 31955 ■ VOM Feature Package 2 Upgrade Kit — 31969 ■ ADM Feature Package 2 Upgrade Kit — 31970 Adjuncts The following adjunct can be used with the 7507 display terminal: ■ 500
ISDN Voice Terminals The ISDN 8503 Voice Terminal ISDN 8503T Designation Card Handset Line Jack (on back of voice terminal) Press Memory button, then dialpad button Volume Control Button Mute Button Program Button Conference/ Ring Button Transfer/ Pause Button 1 2 3 4 5 6 7 8 # a b c 9 0 * Volume Message Mute Redial Program Memory Conf Drop Ring Test Transfer Hold Pause 1 GHI 4 PQRS 7 * ABC DEF JKL MNO 2 5 TUV 8 OPER O 3 6 WXYZ 9 Redial Button Memory Button Drop/Test
The ISDN 8503 Voice Terminal The 8503T voice terminal is a non-modular set used with the ISDN communication system through a 4-wire “T”-interface.
ISDN Voice Terminals Message Light The red Message light goes on when a message is left for the user. This light goes off when the user retrieves the message. Call Appearance/Feature buttons The 8503T voice terminal has three call appearance/flexible feature buttons, each with a red light and a green status light.
The ISDN 8503 Voice Terminal MEMORY button When the user presses the MEMORY button and one of the 12 dial pad keys (memory-dialing locations), while off-hook, the voice terminal automatically dials the number or access code stored on that dial pad key. The user can clear a memory-dialing location by entering program mode, and then pressing the MEMORY button and the appropriate dial pad key on which the number or code is stored.
ISDN Voice Terminals The dial pad keys can also be used as memory-dialing locations. By pressing the PROGRAM button to enter program mode, the user can store a programmed number or access code on each of the 12 dial pad keys (memory-dialing locations). With the MEMORY button, the user can dial these programmed numbers.
The ISDN 8503 Voice Terminal Distance Limitations For a DEFINITY G2 and G3 and a DEFINITY ECS, in which multipoint configuration is used, the maximum signaling distance possible from the port board to the work location jack is: (The terminating resistor should be within 250 feet of the work location; the distances listed are applicable for up to two voice terminals.
ISDN Voice Terminals Terminating Resistors The terminating resistor jumpers are located on the bottom of the voice terminal under a sliding plate between the Line jack and Adjunct jack. These jumpers enable (ON) or bypass (OFF) the terminating resistor. The set is shipped with the jumpers in the OFF position bypassing the terminating resistor. You must verify that the jumper settings are set correctly for your configuration.
The ISDN 8503 Voice Terminal Hearing Aid Compatible This voice terminal is compatible with the inductively coupled hearing aids prescribed by the FCC.
ISDN Voice Terminals Additional Documents The following documents contain additional information relating to the 8503T voice terminal: (Use the 9-digit number listed after each document to order the book from the BCS Publications Center for Lucent Technologies.
The ISDN 8510 Voice/Data Terminal The ISDN 8510 Voice/Data Terminal Desk Stand (on bottom of voice terminal) ISDN 8510T Display Handset 4 Softkeys Menu Telephone Number Card Dir Prev Next a f b g c h d i e j 10 Call Appearance/ Feature Buttons and Designation Card Handset Jack Volume Control Button Mute Button Speaker Button Conference Button Transfer Button Figure 17-5.
ISDN Voice Terminals The 8510T voice/data terminal is used with the Integrated Services Digital Network (ISDN) communication system through a 4-wire “T”-interface.
The ISDN 8510 Voice/Data Terminal Features Nine Fixed Features ■ CONF button ■ DROP button ■ TRANSFER button ■ HOLD button ■ MUTE button ■ SPEAKER button ■ EXIT button ■ REDIAL button ■ VOLUME control button Message Light The red Message light goes on when a message is left for the user. This light goes off when the user retrieves the message.
ISDN Voice Terminals Speaker (Listen-only) Feature The 8510T voice/data terminal can be optioned for the Speakerphone (listen and speak) or the Speaker (listen-only) feature. (The voice terminal is shipped with the Speakerphone setting in place.) The Speaker (listen-only) capability allows a user to engage in a one-way conversation with the far-end. The user can only listen to the far-end; the user is not able to transmit his voice over the speaker.
The ISDN 8510 Voice/Data Terminal ■ Choosing to display an indicator when new calls are logged ■ Locking and unlocking the Directory, Call Log, and all softkey functions ■ Changing or removing your password ■ Initiating a self-test of the voice terminal’s lights, ringer, buttons, and dial pad keys ■ Selecting the contrast level for the display ■ Selecting a personalized ringing pattern ■ Setting the rate at which the display messages are shown on the screen ■ Adding confirmation or error ton
ISDN Voice Terminals Kickstand The kickstand on the bottom of the terminal can be lifted from the desktop stand or can be left level with the bottom of the terminal. The user should check which kickstand adjustment allows the best viewing angle of the display. NOTE: When the kickstand is raised or lowered, the speakerphone should be re-calibrated to compensate for the new position.
The ISDN 8510 Voice/Data Terminal Color Options The 8510T is available in black or in white. Data Features ■ Asynchronous full-duplex operation at data rates from 1200 bits per second (bps) to 57.6 kilobits per second (kbps) through an EIA-232 interface. ■ X.25 packet switched data communication including receipt of X.29 commands from a remote X.25 host for setting packet switched data parameters. ■ Circuit switched data communication over 56 or 64 kbps facilities via industry standard V.
ISDN Voice Terminals ■ If 26 AWG cable is used = 1330 feet Power Requirements Phantom or Auxiliary Power The 8510T can receive power from the switch or from an auxiliary power supply. NOTE: A voice/data set should be auxiliary powered only. The installer can select the type of power used by placing the two power jumpers over the correct set of pins. The power option jumpers are located at the bottom center of the terminal.
The ISDN 8510 Voice/Data Terminal will trip the breaker in the carrier, causing a loss of service. Recommended power supplies are the 1151A1 and 1151A2 with Battery Holdover, and MSP-1 (local) Power Supplies and the 1145A and 1145B1 Bulk Power Supplies. Terminating Resistors The terminating resistor jumpers are located on the upper left side on the bottom of the terminal. Above the pins, on the plastic housing, you will see the label TERM RESISTOR and a diagram of the correct settings.
ISDN Voice Terminals Switch Administration Use the following information for administering an ISDN 8510T voice terminal. ■ An 8510T voice terminal connected to a DEFINITY G2 should be aliased as a 7507 voice terminal. ■ An 8510T voice terminal connected to a DEFINITY G3 or a DEFINITY ECS can be administered as itself. ■ An 8510T data terminal connected to a DEFINITY G2 or G3 or to a DEFINITY ECS should be aliased as a 7507 with data.
The ISDN 8510 Voice/Data Terminal ■ How to enable or disable the listen-only speaker or the speakerphone ■ How to enable Selectable Ring Preference ■ How to clear all parameters stored in memory ■ How to clear a user’s password ■ How to set a password known only by the system manager ■ How to send or disable Button Number 11 Power Failure Operation The 8510T cannot be used as an emergency station during power failure transfer conditions.
ISDN Voice Terminals ■ Handset cord (12 feet) PEC: 2725-01L (Black=COL09; White=COL10) Comcode: Black=102401445; White=104211339 ■ Line cord (7 feet) PEC: 2725-07G Comcode: 103786778 ■ Designation card PEC: 31170 Comcode: 847065467 (package of six 8 1/2’’ by 11’’ cards, 67 sheets) 846819530 (package of tractor feed 9 8’’ by 17’’ cards, 34 sheets, to be used with LabelMaster) ■ 8510 Data Upgrade Kit PEC: 32254A Comcode: 106811979 Adjuncts The following adjuncts can be used with the 8510T voice/data
The ISDN 8520T Voice/Data Terminal ■ ISDN 8500 Series Display Terminal ADM User’s Manual, 555-021-730 ■ Integrated Services Digital Network (ISDN) Terminals Installation and Tests, 555-021-101 ■ ISDN Application Programming Interface (API) Programmer’s Reference Manual, 533-705-200 The ISDN 8520T Voice/Data Terminal RS232 Connector Display ISDN 8520T Menu Dir Prev Next 4 Display Control Buttons 10 Softkeys Handset Telephone Number Card Designation Card a f k p b g l q c h m r i n
ISDN Voice Terminals The 8520T voice/data terminal is used with the ISDN communication system through a 4-wire “T”-interface.
The ISDN 8520T Voice/Data Terminal Features Nine Fixed Features ■ CONF button ■ DROP button ■ TRANSFER button ■ HOLD button ■ MUTE button ■ SPEAKER button ■ EXIT button ■ REDIAL button ■ VOLUME button Message Light The red Message light goes on when a message is left for the user. This light goes off when the user retrieves the message.
ISDN Voice Terminals Speaker (Listen-only) Feature The 8520T voice/data terminal can be optioned for the Speakerphone (listen and speak) or the Speaker (listen-only) feature. (The terminal is shipped with the Speakerphone setting in place.) The Speaker (listen-only) capability allows a user to engage in a one-way conversation with the far-end. The user can only listen to the far-end; the user is not able to transmit his voice over the speaker.
The ISDN 8520T Voice/Data Terminal ■ Searching the Directory for a particular entry, by name or by number, and then placing a call to the number currently shown on the display screen ■ Viewing the contents of your Directory, and then editing, deleting, or placing a call to the number currently shown on the display screen ■ Using ■ Using the Call Log to view incoming and/or outgoing calls ■ Choosing to display an indicator when new calls are logged ■ Locking and unlocking any Directory Changes, t
ISDN Voice Terminals Other Physical Features Handset The 8520T voice/data terminal is equipped with a K-type handset. A K-type Noisy Environment Handset (PEC: 31052A) can also be purchased and connected to the 8520T terminal. Dial pad The 8520T is equipped with a standard 12-button touch-tone dial pad for dialing telephone numbers or accessing features.
The ISDN 8520T Voice/Data Terminal Data Features The ISDN 8520T voice terminal has the following data features: ■ Asynchronous full-duplex operation at data rates from 1200 bits per second (bps) to 57.6 kilobits per second (kbps) through an EIA-232 interface. ■ X.25 packet switched data communication including receipt of X.29 commands from a remote X.25 host for setting packet switched data parameters. ■ Circuit switched data communication over 56 or 64 kbps facilities via industry standard V.
ISDN Voice Terminals Power Requirements Auxiliary Power Supply The 8520T needs auxiliary power from an auxiliary power supply. Recommended power supplies are the 1151A1 and 1151A2 with Battery Holdover and MSP-1 (local) Power Supplies and the 1145A and 1145B1 Bulk Power Supplies. Terminating Resistor The terminating resistor setting must be set by either a service representative or the system administrator.
The ISDN 8520T Voice/Data Terminal Button Numbering The ISDN 8520T voice terminal must be administered in the following ways: ■ When the terminal is connected to a DEFINITY G3 or a DEFINITY ECS, the 20 call appearance/feature buttons should be administered as “BUTTON ASSIGNMENTS” 1 through 20. NOTE: On a DEFINITY G3 or a DEFINITY ECS, the Normal or Exit feature should be administered on Button #21.
ISDN Voice Terminals ■ How to clear a user’s password ■ How to clear a password known by the system administrator ■ How to send or disable Button Number 11 Power Failure Operation The 8520T cannot be used as an emergency station during power failure transfer conditions. FCC Registration The 8520T voice/data terminal is FCC registered as a Class A terminal. Hearing Aid Compatible This voice/data terminal is compatible with the inductively coupled hearing aids as required by the FCC.
The ISDN 8520T Voice/Data Terminal ■ Designation cards 6 sheets (each sheet has enough designation cards for 6 sets) Comcode: 847244274 18 sheets (each sheet has enough designation cards for 6 sets) Comcode: 847244282 68 sheets (each sheet has enough designation cards for 6 sets) Comcode: 847244290 Adjuncts The following adjuncts can be used with the 8520T terminal: ■ 500A Headset Adapter (and a standard headset; see “Headsets” below) ■ S101A Speakerphone (no longer orderable) ■ S201A Speakerphone
ISDN Voice Terminals 17-52 Issue 11 December 1999
Cordless and Wireless Telephones 18 The following cordless and wireless telephones are described in this section: ■ The MDC 9000 Cordless Telephone ■ The MDW 9000 Wireless Telephone ■ The MDW 9031DCP Wireless Pocket Phone, both the single-zone and the dual-zone models Issue 11 December 1999 18-1
Cordless and Wireless Telephones The MDC 9000 Cordless Telephone User Instructions (pull-up) To Update Display Press Stat Antenna Headset On/Off Button Handset Display Directory Card (behind) Headset Jack P STAT ON MSG RANGE BATT Battery Charging Contacts Earpiece Volume Control Switch P STAT ON RANGE MSG BATT Drop Stat (Status) Button On/Off Button Stat On/Off Hold 1 2 ABC 3 5 Dual Purpose Outside Line/ Programmable Buttons Drop Button Hold Button DEF 4 GHI 5 JKL 6 MNO 7PQRS 8TUV
The MDC 9000 Cordless Telephone MDC 9000 Battery Charging Contacts Talk Indicator Handset Hook Ringer Volume Talk Charge Message Figure 18-2. Message Indicator Ringer Volume Controls Base Ringer Base Extension Label Charge Indicator Ext. 14 The MDC 9000 Telephone, Top View of Charging Base The MDC 9000 Cordless Telephone has two basic parts, the handset and the charging base.
Cordless and Wireless Telephones Applications The MDC 9000 Cordless Telephone can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. Physical Features Dimensions NOTE: The dimensions described here for the MDC 9000 handset and charging base are approximate. For the Handset: Width = 2.44 inches Length = 12.1 inches Height = 2.3 inches For the Charging Base: Width = 7.52 inches Length = 9.4 inches Height = 3.
The MDC 9000 Cordless Telephone ■ STATUS button — The Status button (labeled STAT) is used to update all handset visuals if pressed when the STAT indicator appears (the handset is on), and to turn on the display when the handset is off. ■ Headset On/Off button — This button is used for turning the headset on and off. ■ Handset (labeled ON/OFF) button — This button is used for turning the handset on and off. (This button can also turn the headset on and off.
Cordless and Wireless Telephones Headset Jack This jack is used for connecting the headset to the handset. Charging Base Features Talk Indicator This indicator is lit when the handset is off-hook. (The ON icon on the handset is also lit.) Charge Indicator This indicator is lit when the battery is charging and the handset is properly placed on the base. Message Indicator This indicator is lit when you have a message. (MSG also appears on the handset display.
The MDC 9000 Cordless Telephone Display Information The telephone display provides visual call and telephone status information through the following set of icons: ■ or or shows the status of the adjacent button. If the triangle and rectangle both appear, you are using that line; if only the rectangle appears, the line is in use. ■ ON appears when the handset is on. ■ RANGE flashes to indicate that you are out of range and appears steadily when you have lost communication.
Cordless and Wireless Telephones equipment, phone system control units, uninterruptible power supplies, copier machines or electric motors and industrial machinery. A distance of 20 feet is advisable for minimum interference. ■ The base should be located at least 3 feet from metal sources. These include metal reinforced ceilings, metal window frames, concrete reinforced with metal, sheet metal walls, steel 1-beams, metal studs in walls, screens, and fences.
The MDC 9000 Cordless Telephone Figure 18-4 for button numbering on the MDC 9000 set when it is connected to a System 85 or a DEFINITY Generic 2. NOTE: On System 75, the DEFINITY Generic 1 and Generic 3, or a DEFINITY ECS, button numbering begins with “1,” the button on the upper right of the display. On System 85 and the DEFINITY Generic 2, button numbering starts with “3.” 3 2 1 P STAT ON MSG RANGE BATT 5 Figure 18-3.
Cordless and Wireless Telephones FCC Registration The MDC 9000 telephone has been tested and has been found to comply with FCC Part 15 Rules. Hearing Aid Compatibility The MDC 9000 telephone is compatible with inductively-coupled hearing aids.
The MDC 9000 Cordless Telephone Additional Documents The following documents contains additional information relating to the MDC 9000 Cordless Telephone: (Use the 9 digit number listed after each document to order that book from the BCS Publications Center for Lucent Technologies.
Cordless and Wireless Telephones The MDW 9000 Wireless Telephone Antenna Headset On/Off Button Handset Display 18 PMUTE ON MSG RANGE BATT Battery Charging Contacts 5 Outside Line/Programmable Intercom Buttons Volume Control Switch Drop Button Mute Button On/Off Button Mute On/Off Hold 2 1 ABC 3 Hold Button DEF 4 GHI 5 JKL 6 MNO 7PQRS 8TUV 9WXYZ Conf (Conference) Button * Conf Dial Pad 0Oper # Trans Feat Feat (Feature) Button Trans (Transfer) Button MDW 9000 Headset Jack Ext.
The MDW 9000 Wireless Telephone Battery Charging Contacts Handset Hook Spare Battery Cover Charging Cradle Extension Label Figure 18-6. Ext.
Cordless and Wireless Telephones Antenna Top Hook LED Indicators Power Radio Pass Power Plug Connector Card Edge Snap Lock Line Connector Figure 18-7. The MDW 9000 Telephone, Radio Module The MDW 9000 Wireless Telephone is part of the TransTalk™ 9000 Digital Wireless System family of telephones. This wireless telephone has three basic parts, the handset the charging cradle, and the radio module.
The MDW 9000 Wireless Telephone ■ The radio module has Power, Pass, and Radio indicator lights, a top hook, card edge, and snap lock which connect the radio module to the carrier assembly/backplane, an antenna, and power plug and line connectors. In order to provide you with the freedom of mobility, the MDW 9000 is not connected physically (by a line cord or wire from the handset) to the DEFINITY Communications System Generic 1, Generic 2, or Generic 3, or the DEFINITY ECS.
Cordless and Wireless Telephones For the Radio Module: Width = 5.5 inches Length = 12.1 inches Height = 1.5 inches Handset Features Fixed Feature Buttons The MDW 9000 has the following eight fixed feature buttons: ■ CONFERENCE button — labeled CONF ■ DROP button — The DROP button is NOT labeled. It is located in the lower right corner of the LCD display. ■ TRANSFER button — labeled TRANS ■ HOLD button ■ FEATURE button — The Feature button (labeled FEAT) is not used.
The MDW 9000 Wireless Telephone Volume Control Switch The Volume control adjusts the receiver volume (higher or lower) when the handset is off-hook and adjusts the ring volume (higher or lower) when the handset is on-hook. Antenna The antenna is used for receiving the transmissions from the radio module. This antenna is flexible and is permanently attached to the handset. Battery Charging Contacts These contacts are used for charging the handset when contact is made with the charging cradle.
Cordless and Wireless Telephones Power Cord Jack This jack is used for connecting the power cord to your charging cradle. This cord is then plugged into a wall outlet. This jack is located on the back of the cradle. Radio Module Features Power and Pass Indicator Lights The Power and Pass lights indicate when the module is powered up and completes its self-diagnostic. The Radio light goes on when the handset is in use.
The MDW 9000 Wireless Telephone ■ MUTE appears when the handset microphone is muted. ■ T appears when the Wireless Test Mode is active. ■ MSG appears when there is a message waiting for you. ■ BATT appears when the battery is low. Out-of-Range Indication While the set is still active, it gives an audible indication (double beep) and visual indication (the RANGE icon appears on the LCD display) when the handset is getting out of range of the radio module.
Cordless and Wireless Telephones ■ Install the radio base stations within 15 feet of either side of, and within 6-8 feet above, a properly grounded 3-prong electrical outlet that is not controlled by an on/off switch. ■ If your phone system uses an uninterruptible power supply, such as a backup generator, be sure to connect the radio or radio base station to that power supply.
The MDW 9000 Wireless Telephone 3 2 10 P MUTE ON MSG RANGE BATT 5 Figure 18-8. 4 DROP Button Numbering for an MDW 9000 Connected to a System 75, a DEFINITY Generic 1 or 3, or a DEFINITY ECS 5 7 Figure 18-9. 1 4 3 10 P MUTE ON MSG RANGE BATT 6 DROP Button Numbering for an MDW 9000 Connected to a System 85 or a DEFINITY Generic 2 FCC Registration The MDW 9000 telephone has been tested and has been found to comply with FCC Part 15 Rules.
Cordless and Wireless Telephones UL and CSA Approval This voice terminal has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90.
The MDW 9000 Wireless Telephone ■ Carrier Assembly AC Adapter Comcode: 847224227 ■ Radio Module AC Adapter Comcode: 847180890 ■ Charging Cradle AC Adapter Comcode: 847180890 Additional Documents The following documents contain additional information relating to the MDW 9000 Wireless Telephone: (Use the 9 digit number listed after each document to order that book from the BCS Publications Center for Lucent Technologies.
Cordless and Wireless Telephones The MDW 9031DCP Wireless Pocket Phone Headset On/Off button Antenna Lanyard loop Receiver Handset display with Backlighting Volume control Redial button On/Off button Feature/Program button Conference button Transfer button Hold button Column buttons MMute button Select button On/Off Redial Mute Menu Feat/P 1 2 ABC 3 DEF Conf 4 GHI 5 JKL 6 MNO Trans 7 PQRS 8 TUV 9 WXYZ Hold 0 OPER Headset connector Figure 18-10.
The MDW 9031DCP Wireless Pocket Phone “Battery Charge State Label” Handset Cradle REFRESH Button Spare Battery Compartment Battery Contacts REFRESH LED Handset Cradle Battery Contacts Spare Battery Compartment HANDSET LED SPARE LED Figure 18-11. The Battery Charger Antenna Top Hook LED Indicators Power LED Radio LED Pass LED Power Plug Connector Card Edge Snap Lock Line Connector Figure 18-12.
Cordless and Wireless Telephones The MDW 9031DCP Wireless Pocket Phone is part of the TransTalk™ 9000 Digital Wireless System family of telephones. This phone comes in two models, the single-zone model and the dual-zone model, according to whether the phone will be connected to one radio module (a single-zone configuration) or two radio modules (a dual-zone configuration). This wireless Pocket Phone has three basic parts, the handset the battery charger, and the radio module.
The MDW 9031DCP Wireless Pocket Phone Physical Features Dimensions NOTE: The dimensions described here for the MDW 9031DCP Pocket Phone are approximate. For the Handset: Width = 2.25 inches Length = 6 inches Depth = 1.0 inches Weight: 33 pounds For the Battery Charger: Width = 3.94 inches Length = 9.75 inches Height = 5.13 inches For the Radio Module: Width = 5.5 inches Length = 12.1 inches Height = 1.
Cordless and Wireless Telephones ■ Four COLUMN buttons — these buttons (labeled ) are used together with the SELECT button to choose a line or programmable/intercom/drop button. ■ Headset On/Off button — This button is used for turning the headset on and off. Located on top of the handset, it is used when the headset jack is in use. At all other times, the Headset On/Off button is deactivated to prevent accidental call termination.
The MDW 9031DCP Wireless Pocket Phone Handset Cradle The handset cradle charges a battery pack in the handset. REFRESH button and Indicator When you press the REFRESH button, the battery pack in the handset cradle is refreshed by fully discharging the battery pack before recharging it. While the battery pack is being discharged, the REFRESH and HANDSET lights go on.
Cordless and Wireless Telephones Line Jack The line cord should be inserted into this jack. Out-of-Range Indication While the set is still active, it gives an audible indication (double beep) and visual indication (the RANGE icon appears on the LCD display) when the handset is getting out of range of the radio module.
The MDW 9031DCP Wireless Pocket Phone ■ Installing a single radio module on a shelf or desk is not recommended because it greatly reduces the range and quality of the transmission. ■ Install a single radio module within 3 feet of either side of, and within 6-12 feet above, a properly grounded 3-prong electrical outlet that is not controlled by an on/off switch. ■ For remote locations, an individual radio module can be installed in that area and attached via telephone line cord to the phone system.
Cordless and Wireless Telephones Switch Administration Aliasing For all System 75 and System 85 releases and DEFINITY Generic 1, Generic 2, and Generic 3, Versions 1 and 2, the MDW 9031DCP Pocket Phone must be administered as an 8410D voice terminal. For the MDW 9030DCP Dual Zone phones connected to a DEFINITY system prior to Release 5.0, you must administer two station ports (2 extensions) — one for each radio module.
The MDW 9031DCP Wireless Pocket Phone FCC Registration The MDW 9031DCP Pocket Phone has been tested and has been found to comply with FCC Part 15 Rules. Hearing Aid Compatibility The MDW 9031DCP is compatible with inductively-coupled hearing aids. UL and CSA Approval The MDW 9031DCP has been tested and has met the Underwriters Laboratories (UL) Standards UL 1459 and have also met the Canadian Standards Association (CSA) Standards CSA-C22.2 No.225-M90.
Cordless and Wireless Telephones PEC: 3204-CR3A For 117A3 Carrier – Comcode: 107907289 For 117A4 Carrier – Comcode: 107955122 Power Cord (25 feet) and AC Adapter for Carrier Comcode: 847224227 Expansion Cable (6 foot) for Multiple-Carrier Installation PEC: 32035A Comcode: 847667870 ■ Standard Battery Pack, includes Carrying Clip PEC: 32045A Comcode: 107733107 Carrying Clip for Standard Battery Pack Comcode: 847773140 Extended Battery Pack, includes Carrying Clip PEC: 32049A Comcode: 107733115 Carrying Cli
The MDW 9031DCP Wireless Pocket Phone Radium (Over the Ear) Headset with Adapter PEC: 3123-153A For Headset – Comcode: 407720739 For Adapter – Comcode: 848047965 ■ Kit of Parts (for Stand-Alone Installations) includes Power Cord (11 foot) and AC Adapter for Radio Module PEC: D-182866 Comcode: 107586828 Additional Documents The following documents contain additional information relating to the MDW9031DCP Wireless Pocket Phone: (Use the 9 digit number listed after each document to order that book from the
Cordless and Wireless Telephones 18-36 Issue 11 December 1999
Other Voice Terminals 19 Voice Terminals Reusable from Other Systems The customer may have voice terminals that were used with a previous system that are compatible with System 75 and System 85. The installation of these reusable voice terminals in a System 75 or System 85 is possible, but not recommended. Advantages of Reusable Terminals The main advantage of reusable terminals is a modest cost savings.
Other Voice Terminals Models 7302H, 7303H, 7305H01B, and 7305H02B These MERLIN Communication System voice terminals are similar in appearance and functions to System 75 and System 85 multi-appearance terminals. The 7302H is a 5-button voice terminal that can be desk or wall mounted. This set can no longer be ordered. The 7303H is a 10-button voice terminal that can be desk or wall mounted. This set can no longer be ordered. The 7305H series is a 34-button voice terminal.
Multi-Button Electronic Telephone (MET) Sets ABC ABC DEF DEF GHI GHI JKL JKL MNO MNO PRS PRS TUV TUV WXY WXY 11 44 77 ** 22 55 88 OPER O O 33 66 99 ## R Figure 19-1.
Other Voice Terminals ABC ABC DEF DEF GHI GHI JKL JKL MNO MNO PRS PRS TUV TUV WXY WXY 11 44 77 ** 22 55 88 OPER O O R Figure 19-2.
Multi-Button Electronic Telephone (MET) Sets ABC ABC DEF DEF GHI GHI JKL JKL MNO MNO PRS PRS TUV TUV WXY WXY 11 44 77 ** 22 55 88 O O 33 66 99 ## ON QUIET OFF R Figure 19-3.
Other Voice Terminals 11 GHI GHI 44 PRS PRS 77 ** ABC ABC DEF DEF JKL JKL MNO MNO 22 55 TUV TUV 88 O O R Figure 19-4.
Multi-Button Electronic Telephone (MET) Sets ABC ABC DEF DEF GHI GHI JKL JKL MNO MNO PRS PRS TUV TUV WXY WXY 11 44 77 ** 22 55 88 O O 33 66 99 ## R Figure 19-5.
Other Voice Terminals 19-8 Issue 11 December 1999
Adjuncts 20 This section describes the devices that can be used with voice terminals to supplement services and features. The information provided here includes specifics on the controls, buttons, lights, and functions of voice terminal adjuncts that can be connected to the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. Adjuncts that are identical in appearance and function, but have different codes, are covered under the same heading.
Adjuncts Call Coverage Modules C201A Call Coverage Module Indicator Lights Conference Buttons for CustomerDesignated Call Appearances and/or Features Transfer Hold Drop ABC DEF GHI JKL MNO PRS TUV WXY Oper # 1 4 7 * Message 2 5 8 O 3 6 9 Select Ring 7434D Voice Terminal Figure 20-1.
Call Coverage Modules The C201A Call Coverage Module and the C401A and C401B Call Coverage Module are identical in appearance, operation, and function. The Call Coverage Module provides 20 call appearance/feature buttons to supplement those on the associated voice terminal. NOTE: The C201A module and 7205H voice terminal were discontinued in March 1988. The C102A module has also been discontinued.
Adjuncts Power The C201A Call Coverage Module draws its required power from the system switch through the 7205H voice terminal to which it is attached; no auxiliary power is required. However, when a C401A or C401B module is used with a 7405D or 7434D voice terminal, auxiliary power must be fed through the terminal’s line cord from one of the sources listed in the Adjunct Power section earlier in this manual.
Digital Display Modules Digital Display Modules D401A Digital Display Module 40 Character Alphanumeric Display On/Off Switch a = OUTSIDE CALL On/Off Conference Transfer Hold Drop ABC DEF GHI JKL MNO PRS TUV WXY Oper # 1 4 7 * Message 2 5 8 O 3 6 9 Select Ring 7434D Voice Terminal Figure 20-2.
Adjuncts The D401A and D401B Digital Display Modules add a large easy-to-read 40-character display to the top of the 7405D or 7434D voice terminal. The D401 provides a vacuum-fluorescent display, which is significantly brighter than LCD displays and visible from any angle. It provides prompt retrieval of Leave Word Calling or Message Center messages, can identify incoming calls, both names and number, and perform other functions.
Digital Display Modules On/Off Switch The On/Off switch turns the module on and off. The associated green status light goes on when the module is on and is dark when the module is off. Assignable Function Buttons Seven additional buttons with associated green status lights. The system manager assigns these buttons to display the control functions. Display Functions The following display functions are available on buttons (the actual labeling on some buttons is shortened).
Adjuncts ■ Stored Number — used to enable inspection of numbers stored in Abbreviated Dialing (AD) lists or on individual AD buttons, or stored by the Last Number Dialed feature. On System 85, this function is available on some versions of R2V3 and R2V4, and G2. ■ Timer — used to start or stop the elapsed timer function on the display module; displays hours, minutes, and seconds.
Function Key Modules Function Key Modules Function Key Module Conference Transfer Drop Hold ABC DEF GHI JKL MNO 4 5 1 PRS 7 * Message Recall 2 TUV 8 Oper O 3 6 WXY 9 # Disconnect 7405 Voice Terminal Figure 20-3. Status Light The F201 or F401A Function Key Module Mounted on a 7405D Voice Terminal The Function Key Module greatly extends the feature access capability of the voice terminal where it is used. The module provides 24 buttons that can be assigned only to features.
Adjuncts Applications The Function Key Module can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. The F201A is used with the 7205H multi-appearance hybrid voice terminal (System 85 and the DEFINITY G2 only), while the F401A is used with the 7405D digital terminal. Physical Description Features Feature buttons The module provides 24 buttons that can only be assigned features. Each button has a square green status light.
Function Key Modules Digital Terminal Data Module PEC Codes The F201A and F401A Function Key Modules were ordered using the following PECs: ■ F401A Function Key Module — PEC: 31744 ■ F201A Function Key Module — PEC: 31721 Issue 11 December 1999 20-11
Adjuncts The 801A Expansion Module 801A 18 Dual LED call appearance/ feature buttons 6 Feature buttons, each with a green light Figure 20-4. The 801A Expansion Module The 801A Expansion Module is an optional device which can be connected to an 8434DX (8434D02A) voice terminal to extend the number of call appearance and feature buttons available on the voice terminal. NOTE: This expansion module can be connected ONLY to an 8434DX model connected to a DEFINITY G3V3.3 (or later).
The 801A Expansion Module Applications The 801A Expansion Module can be connected only to an 8434DX voice terminal. Physical Description Features Buttons The expansion module has 24 buttons arranged in two columns. ■ The top 18 buttons (that is, the top nine buttons in each column) have a red and a green light next to them. These buttons can be used for call appearances or features. ■ The bottom six buttons (that is, the last three buttons in each column) have a single green status light next to them.
Adjuncts Administering the 801A Expansion Module The 8434DX with an attached expansion module can be used ONLY with systems such as a DEFINITY G3V3.3 or later that allow native support. That is, the 8434DX MUST BE ADMINISTERED AS ITSELF, not aliased as any other type of voice terminal. On the first station administration screen of the 8434DX, put a “Y” (for Yes) next to the “Expansion Module?” entry.
The 801A Expansion Module 801A Expansion Module PECs The 801A Expansion Module can be ordered with the following PECs: ■ Black ZE801A-003 Expansion Module (Black) PEC: 32300, Comcode: 106702921 (White) PEC: 32301, Comcode: 106702764 ■ 2-foot D6AP-87 line cord Comcode: 105644744 Additional Documents The following document is shipped with the expansion module.
Adjuncts The XM24 Expansion Module XM24 Figure 20-6. The XM24 Expansion Module The XM24 Expansion Module is an optional device which can be connected to a 6416D+, 6416D+M, 6424D+, 6424D+M, or CALLMASTER V telephone to extend the number of call appearance and feature buttons available on each of these telephones.
The XM24 Expansion Module ■ The XM24 with a different angle, meant for the modular 6416D+M, 6424D+M, and CALLMASTER V (White = PEC: 33072, Comcode: 108554503 Gray = PEC: 33071, Comcode: 108445511) Applications The XM24 Expansion Module can be connected only to a 6416D+, 6416D+M, 6424D+, 6424D+M, or a CALLMASTER V telephone. These telephones have an “XM24” jack on the bottom of the set in order to allow connection with the expansion module.
Adjuncts Administering the XM24 Expansion Module The 6416D+ or 6424D+ with connected expansion module are administered as itself only on DEFINITY ECS Release 6.1 and later. These telephones with or without an expansion module cannot be aliased as any other telephone. NOTE: The 6416D+M and CALLMASTER V are administered as a 6416D+; a 6424D+M is administered as a 6424D+. On the first station administration screen of the 6416D+ or 6424D+, put a “Y” (for Yes) next to the “Expansion Module?” entry.
The XM24 Expansion Module XM24 Expansion Module PECs and Comcodes The XM24 Expansion Module can be ordered with the following PECs and Comcodes: ■ The XM24 that can be used with the original non-modular 6416D+ and 6424D+: XM24-264 (White) Expansion Module PEC: 33074, Comcode: 108023235 XM24-264 (White) Expansion Module with 1151A Power Supply PEC: 33073 Comcode for XM24 expansion module: 108023235 Comcode for 1151A power supply: 107785693 OR XM24-323 (Gray) Expansion Module PEC: 33076, Comcode: 108023243
Adjuncts The 100A Tip/Ring Module Back of 6416D+M or 6424D+M Telephone Desktop Stand Figure 20-8. Tip/Ring Module The 100ATip/Ring Module Being Installed in the Desktop Stand of a 6416D+ or 6424D+ Telephone The Tip/Ring module can be installed in the desktop stand of the Modular 6416D+M (6416D02A) and 6424D+M (6424D02A) telephones to provide increased set functionality.
The 100A Tip/Ring Module The module also has a special detector which senses if the analog adjunct is on-hook or off-hook, and the module, therefore, is able to disconnect the analog adjunct at the end of a call. However, whether the analog adjunct responds to a request to hang up depends on the design of the analog adjunct.
Adjuncts Physical Description Features The Tip/Ring Module Option Switches On the back of the 100A Tip/Ring module are two option switches shown below. 1 2 Figure 20-9. FAX The Two Option Switches on the Tip/Ring Module The Option Switch on the Left, Labeled 1 and 2 — The option switch on the left allows you to choose the line that the connected analog adjunct will use. — When the Option switch on the left is set to 1, the telephone and the Analog adjunct share the same line.
The 100A Tip/Ring Module Set the option switch on the right according to the analog device that is connected with the telephone. — The option means that the analog adjunct will be interrupted. Use this option for adjunct speakerphones or answering machines. If an attached speakerphone does not recognize a far end disconnect signal, you may have to manually turn off the speakerphone. — The FAX option does not interrupt the analog adjunct. Use this option for fax machines and modems.
Adjuncts Power The Tip/Ring module will work ONLY if it has auxiliary power. When the auxiliary power source is turned on, the Tip/Ring module will automatically power up. Suggested power supplies include: ■ Suitable stand-alone power supplies include the 1151A1 and the 1151A2 with Battery Holdover. ■ Suitable bulk power supplies are the 1145A and the 1145B1.
The 100A Tip/Ring Module Additional Documents The following document is shipped with the Tip/Ring module. Additional copies are available from the BCS Publications Center for Lucent Technologies: ■ The Tip/Ring Interface Module Installation and User Instructions, 555-233-707.
Adjuncts Headset Adapters Headset Light Off Switch On/Quiet Switch Figure 20-10. The 500A Headset Adapter Two adapters are available to allow the use of standard headsets with voice terminals connected to the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY Enterprise Communications Server (ECS), System 75, and System 85. The 500A and the 502A Headset Adapters are identical in appearance, operation, and function but different in internal circuitry.
Headset Adapters Physical Description Features On/Quiet Switch This dual-purpose switch is used to: ■ Turn on the adapter connecting the headset to the voice terminal. Pressing the On switch is equivalent to going off-hook with the handset. ■ Disable the transmitter of the headset temporarily for privacy. Off Switch ■ Turns off the adapter and disconnects the headset. ■ Pressing the Off switch is equivalent to going on-hook with the handset.
Adjuncts Considerations The use of a headset provides hands-free terminal operation with more privacy than a speakerphone. A headset is especially convenient for users who must frequently type or look up information during calls. NOTE: A speakerphone and a headset adapter cannot be connected to the same voice terminal simultaneously.
The Z34A Message Waiting Indicator The Z34A Message Waiting Indicator Z34A Message Waiting Light D4BU 1-Foot Line Cord 500/2500-Type Telephone Mounting Bracket Screw Figure 20-11. The Z34A Message Waiting Indicator The Z34A Message Waiting Indicator is an adjunct that can be attached to analog voice terminals to allow these terminals to take advantage of the Leave Word Calling feature or message retrieval via AUDIX.
Adjuncts Physical Description Features Light The Z34A contains a red light that flashes automatically when a message has been left for the terminal user. Other Physical Features Mounting Options The Z34A mounts on the right side of the voice terminal and is electrically connected between the terminal’s line jack and the wall jack. Color Options The Z34A is available in ultra light gray only.
The 4A, S101A, and S102A Speakerphones The 4A, S101A, and S102A Speakerphones Speakerphone On/Off Button Speakerphone Microphone On/Off Microphone On/Off Button On/Off Volume Volume Control Figure 20-12. Low High The S101A and S102A Speakerphones Speakerphones are available for providing total voice terminal operation without the use of the handset. Turning on the speakerphone is equivalent to lifting the voice terminal handset when placing or answering a call.
Adjuncts ISDN terminals. The S102A is intended for use with multi-appearance Models 7303S and 7305S voice terminals only. The 4A speakerphone is used only with the basic 2500-series terminals and METs on an “in place” basis. Physical Description S101A and S102A Speakerphones Features On/Off button for Speakerphone There is a nonlocking On/Off button and adjacent green light for the speakerphone.
The 4A, S101A, and S102A Speakerphones Power The S101A and S102A Speakerphones require either AC or DC auxiliary power from one of the sources listed the Adjunct Power section earlier in this manual. Power from the source supply is applied by way of the voice terminal’s mounting cord and the speakerphone’s connecting cord. The S102A draws its power from the system switch through the associated voice terminal; it does not require an auxiliary power source.
Adjuncts The S201A and S202A Speakerphones Reset Button Speakerphone Button Volume Indicator Bar and Buttons Speakerphone Mute Button Mute Figure 20-13. Volume The S201A and S202A Speakerphones The S201A and S202A speakerphones are available for providing total voice terminal operation without the use of the handset. Turning on the speakerphone is equivalent to lifting the voice terminal handset when placing or answering a call. Turning off the speakerphone is equivalent to hanging up the handset.
The S201A and S202A Speakerphones voice terminals/telephones, and the 7505, 7506, and 7507, 8503T, 8510T, and 8520T ISDN terminals. The S202A is intended for use with multi-appearance Models 7303S and 7305S voice terminals only. Physical Description Features Speakerphone button This locking button turns the speakerphone on and off. When the green light is on, the speakerphone is on. Mute button This nonlocking button and its red light are for the microphone. When the light is on, the microphone is muted.
Adjuncts Power The S201A Speakerphone requires either AC or DC auxiliary power from one of the sources listed in the Adjunct Power section earlier in this manual. Power from the source supply is applied by way of the voice terminal’s mounting cord and the speakerphone’s connecting cord. A 24 volt, 7.5 Va AC transformer with a 400 B2 adapter is packed with the S201A Speakerphone. The transformer may be located up to 125 feet from the speakerphone.
The S203A Speakerphone The S203A Speakerphone Reset Button Speakerphone Button Volume Indicator Bar and Buttons Speakerphone Mute/Auto Answer Button Figure 20-14. Mute Auto Answer Volume The S203 Speakerphone The S203A Speakerphone is an analog speakerphone with Auto-Answer and Automatic Disconnect capabilities. The S203A can be used in conjunction with any single-line analog set (an additional 267A2 bridging adapter is included for this arrangement) or as a stand-alone unit.
Adjuncts Applications The S203A Speakerphone can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. Its Auto-Answer and Auto-Disconnect capabilities make it very suitable for environments where hands-free mode of answering is desirable. Such scenarios include hospital emergency rooms, laboratories, nursing homes, storerooms, and warehouses. Physical Description NOTE: The following dimensions are approximate.
The S203A Speakerphone Recalibrate button The Recalibrate button is located on the rear of the S203A Speakerphone. When this button is pressed (or when the S203A is powered up), the S203A executes an acoustical calibration of its environment. It is necessary to recalibrate the S203A each time it has been moved or its surroundings have been altered. Other Physical Features Jacks The S203A Speakerphone has a 8-pin modular phone connector on the rear.
Adjuncts FCC Registration The S203A Speakerphone is FCC registered (AS5USA-61382-SP-N Ringer Equivalence 0.4A, 0.9B USOC Jack RJ11C, RJ11W).
The 107-Type Loudspeaker The 107-Type Loudspeaker Figure 20-15. The 107-Type Loudspeaker The 107-Type Loudspeaker amplifies the received voice signal. This allows the user to hear better in an noisy environment. Applications The loudspeaker can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. It is used only with 2500-type voice terminals on “in place” basis. It is particularly useful in a conference room or noisy room.
Adjuncts Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 5-3/4 inches Depth (front to back) = 3-3/4 inches Height = 4 inches Features Volume control The loudspeaker is equipped with a rotary volume control. ON/OFF switch The ON/OFF switch turns the loudspeaker on and off when placed in the appropriate setting. Power The 107-Type Loudspeaker requires an external AC or DC power source.
The 7404D (Voice Terminal) Messaging Cartridge The 7404D (Voice Terminal) Messaging Cartridge Figure 20-16. The Messaging Cartridge This Messaging Cartridge adjunct can be added to a 7404D Voice Terminal to provide displays on an associated data terminal. The messaging cartridge plugs into the bottom of the 7404D Voice Terminal. The basic messaging cartridge generates displays of call-related and personal-service information only. NOTE: The 7404D Messaging Cartridge was discontinued in July 2090.
Adjuncts Considerations A selection of the following display functions must be assigned to letter keys on the keyboard of the associated data terminal: ■ Normal Mode ■ Inspect ■ Message Retrieval ■ Next ■ Make Call ■ Delete Message ■ Date/Time Messaging Cartridge PECs The messaging cartridge attached to the 7404D voice terminal was ordered using the following PEC: ■ 20-44 Messaging Feature Cartridge — PEC: 31810 Issue 11 December 1999
The 2870A1 Automatic Dialer The 2870A1 Automatic Dialer RECORD OFF RECORD WAIT ABC ABC DEF DEF GHI GHI JKL JKL MNO MNO PRS PRS TUV TUV WXY WXY Oper Oper ## 11 44 77 * 22 55 88 O O 33 66 99 LAST NUMBER DIALED Figure 20-17. The 2870A1 Automatic Dialer The 2870A1 Automatic Dialer is an optional add-on adjunct for a MET set that is provided on an “in place” basis only. The dialer provides the capability to record and automatically dial 31 numbers of up to 15 digits each.
Adjuncts Physical Description Features Programmable buttons The automatic dialer has 31 buttons on which telephone numbers of up to 15 digits can be stored for one button dialing. Four Fixed function buttons ■ Record Off ■ Record (Equipped with an Indicator) ■ Wait ■ Last Number Dialed Other Physical Features Dial pad The automatic dialer is equipped with a 12-button touch-tone dial pad. Power The 2870A1 Automatic Dialer requires auxiliary power from an external source.
Data Modules 21 This section describes the devices that provide a data communications interface. Information on the data modules and other related data equipment used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85 is provided here. The following devices described in this section provide data interface functions such as modems, protocol converters, and data units.
Data Modules 21-2 ■ Modular Processor Data Module (MPDM) ■ Modular Trunk Data Module (MTDM) ■ 3270 Data Module ■ Asynchronous Data Unit (ADU) ■ Multiple Asynchronous Data Unit (MADU) ■ DCIU Interface Units ■ 2500-Series Data Service Unit (DSU) Issue 11 December 1999
The 7400A Data Module RD TD CTS RTS DTR DCD RI DSR DTR The 7400A Data Module HOME POWER/ TEST Figure 21-1. NEXT / NO 7400A Data Module BACK ENTER / YES DATA The 7400A Data Module The 7400A Data Module is a full duplex asynchronous data module designed to replace both the TDM (MTDM) and PDM (MPDM) for asynchronous applications.
Data Modules Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front and rear) = 8-3/4 inches Height = 1-3/4 inches Features Lights ■ POWER/TEST light — This red light goes on when the 7400A data module is on and flashes during all tests. ■ DATA light — This green light goes on during a data call and flashes when receiving an incoming call.
The 7400A Data Module Mounting Options The 7400A data module can be configured as a stand-alone unit or in a multiple-mount housing. (The multiple-mount housing must be used if D-lead modems are used in the modem pool. The multiple-mount can also be used to support Hayes-compatible modems.) Color Options The 7400A Data Module is available in misty cream only.
Data Modules Data features for host or terminal applications include: ■ EIA RS-232-D DCE interface ■ Keyboard dialing and Hayes user interface emulation option ■ Answer only ■ Cyclic Ring-indicator option ■ Ignore DTR input option Power The stand-alone 7400A data module operates with power from a WP90110 L7 AC power converter. This is a modular AC to DC adapter that is normally plugged into a wall outlet.
The 7400A Data Module Additional Documents The following documents contain additional information relating to the 7400A data module: ■ 7400A Data Module User’s Manual, 555-020-706 ■ 7400A Data Module Installation Guide, 555-020-708 ■ System 85 Application Notes for External Modem Pooling, 555-109-005 ■ System 85 Application Notes for Host Access Operation, 555-109-004 ■ System 75 Application Notes for External Modem Pooling, 555-209-016 ■ System 75 Application Notes for Host Access Operation, 55
Data Modules The 7400B and 7400B Plus Data Module DATA METERING CHECK AA CD RD SD TR OH POWER TEST SPEED DATA 7400B Data Module Figure 21-2. The 7400B Plus Data Module The 7400B and 7400B Plus Data Modules are full-duplex asynchronous, Hayes-compatible data modules that provide for simultaneous voice-data communications at the desk top over standard twisted pair wiring.
The 7400B and 7400B Plus Data Module In the linked mode, the 7400B and 7400B Plus data modules provide for simultaneous voice data communications over standard twisted pair wiring. In this mode, the 7400B and 7400B Plus data modules can be used with all DCP voice terminals to provide data service.
Data Modules Physical Description Dimensions NOTE: The following measurements for the 7400B and 7400B Plus data module are approximate. Width = 7 inches Depth (front and rear) = 8-3/4 inches Height = 1-3/4 inches Features Lights ■ POWER/TEST light — The red POWER/TEST light goes on when AC power is supplied to the 7400B or 7400B Plus data module and flashes during all tests. This light, together with the DATA light, also flashes if there is a DCP line problem.
The 7400B and 7400B Plus Data Module Tests The 7400B and 7400B Plus data modules support the following test and maintenance features: ■ Local Loopback and Remote Loopback ■ Local Loopback Self Test and Remote Loop Self Test ■ DCP Looparound ■ Self-Test ■ Make Busy on Local Loop Capabilities The 7400B and 7400B Plus data modules have the following basic features and capabilities: ■ DCP mode 2 operation only ■ Full-duplex, 10-bit start/stop, asynchronous operation ■ Asynchronous data rates of
Data Modules Power The stand-alone 7400B and 7400B Plus data modules operate with power from a WP91508L5 AC power converter. This is a modular AC to DC adapter that is normally plugged into a wall outlet. The data module allows phantom power to be transmitted to the attached DCP voice terminal even if AC power to the data module is interrupted.
The 7400B and 7400B Plus Data Module Notes for Use with PC Packages The 7400B Plus voice and data feature has been tested with the following PC communication packages: ■ CARBON COPY Plus™ V5.1 ■ Crosstalk®- XVI V3.71 ■ Crosstalk Mk.4 V1.1 ■ Hot Line V2.2 (voice dialing packages) ■ HyperACCESS® V3.32 ■ MicroPhone V1.5 (MacIntosh package) ■ PC TOOLS Deluxe V6 (voice dialing packages) ■ Procomm Plus® V1.1B ■ Relay Gold® V3.0 ■ SideKick® V1.
Data Modules 7400B Data Module PECs The 7400B and 7400B Plus data modules can be ordered using the following PECs: ■ 7400B Plus Data Module PEC: 2172-101 Comcode: 106545841 NOTE: The 7400B Plus data module comes with a stand-alone power supply.
The 7400D Low-Speed Asynchronous Data Module RD TD CTS RTS DTR DCD RI DSR DTR The 7400D Low-Speed Asynchronous Data Module HOME POWER TEST DATA NEXT/NO BACK ENTER/YES 7400D Data Module Figure 21-4. The 7400D Data Module The 7400D Data Module is a full-duplex, 4-wire synchronous data module for the DCP environment and is designed to work where the integration of voice and data is not required. The 7400D supports synchronous connections at speeds up to 19.2 Kbps via an EIA-232-D interface.
Data Modules Physical Description Dimensions The following dimensions are approximate. Width = 7 inches Depth (front and rear) = 8-3/4 inches Height = 1-3/4 inches Features Front Panel The front panel is comprised of: Two LEDs, one red and one green — POWER/TEST light — This red light goes on when the 7400D data module is on, and it flashes during all tests — DATA light — This green light goes on when a data call is in progress, and it flashes when receiving an incoming call.
The 7400D Low-Speed Asynchronous Data Module — BACK button — This button is used to scroll backward through the menu. By keeping this button depressed, you are able to quickly scroll back through menu items. — ENTER/YES button — This button is used to set an option or execute the function displayed. The Main Menu The Main Menu has several levels of options and suboptions. By pressing NEXT/NO, you are able to scroll through the entire first level to view each option shown in the flowchart below.
Data Modules Power Supply Unit An individual power supply unit is required with the 7400D data module only when it is used as a stand-alone module. When the 7400D is rack-mounted in a 77A rack-mount, the rack-mount provides powering capabilities for up to eight units. The power supply unit connects a grounded AC outlet and the “POWER” connector at the rear of the data module. This power supply unit provides the necessary operating voltages for the data module.
The 7400D Low-Speed Asynchronous Data Module Setting Options The following table presents the choices for each option of the Answer Only user interface and the order in which the are presented in the menu. All options must be set from the front panel. This table also shows the factory default for each option. (The FACTORY DEFAULT values are typed in larger type and in bold.) Table 21-1.
Data Modules FCC Registration No digital phones or data modules are FCC registered. The 7400D data module meets Part 15 Class A requirements and is labeled as such.
The 8400B Plus Data Module The 8400B Plus Data Module The red and green lights on front panel Figure 21-5. The 8400B Plus Data Module Like the 7400B Plus data module, the 8400B Plus Data Module is a full-duplex asynchronous, data module that provides for simultaneous voice-data communications at the desktop over standard twisted pair wiring. However, it has been designed explicitly to work, in the linked mode, with 2-wire DEFINITY DCP circuits.
Data Modules M9/F25 Adapter, an adapter which allows connection from a 9-pin jack to a 25-pin jack. A DCP interface (using a D8W-type modular telephone cord) is used to connect the 8400B Plus data module to the digital PBX. The 8400B Plus data module may be optioned for use either with or without a telephone. In the stand-alone case, the 8400B Plus data module supports data service only. Otherwise, the 8400B Plus data module provides simultaneous data and voice service.
The 8400B Plus Data Module (Rear Endplate) Telephone (Optional) PHONE! M9/F25 Adapter (use only with 25-pin EIA-232-D Connector Cord) USE ONLY WITH COMMUNICATION LINE/ POWER CIRCUIT POWER SOURCE D8W EIA-232-D (9-pin or 25-pin) Connector Cord D8W AC Outlet KS-22911, L2 Power Supply Wall Jack 400B2 Adapter D6AP Figure 21-6.
Data Modules (Rear Endplate) PHONE! Telephone (Optional) M9/F25 Adapter (use only with 25-pin EIA-232-D Connector Cord) USE ONLY WITH COMMUNICATION LINE/ POWER CIRCUIT POWER SOURCE EIA-232-D (9-pin or 25-pin) Connector Cord D8W D8W AC Outlet Wall Jack D8W PHONE OTHER LINE -7 +8 -2 +5 Actual connection may vary according to the configuration of your local AC outlet MSP-1 Power Supply Figure 21-7.
The 8400B Plus Data Module (Rear Endplate) PHONE! Telephone (Optional) USE ONLY WITH COMMUNICATION LINE/ POWER CIRCUIT POWER SOURCE M9/F25 Adapter (use only with 25-pin EIA-232-D Connector Cord) D8W D8W EIA-232-D (9-pin or 25-pin) Connector Cord Wall Jack Figure 21-8. Typical Installation of the US and International Configuration, Including Telephone and Closet Power Supply Physical Description Dimensions NOTE: The following measurements for the 8400B Plus data module are approximate.
Data Modules When power is first applied to the 8400B Plus data module, the unit performs a self-test to verify that it is in working order. During the self-test, both lights will remain ON. When the self-test is complete, the green light turns OFF ■ If self-test passed, the red light will remain ON. This indicates that your 8400B Plus data module is installed and ready for data communications operation.
The 8400B Plus Data Module ■ EIA CONNECTOR INTERFACE — This connector provides an interface between the 8400B Plus data module and the terminal (DTE) device. — If the communications port on the terminal device is a 9-pin interface, use a cord with DB9 male connectors on each end to connect the data module to the terminal device.
Data Modules ■ An AT command interface that emulates a Hayes 2400 Smartmodem and supports the following: — storage of the wait time for carrier detect interval (S-register S7) The number stored in the S7 register establishes the time the 8400B Plus data module will wait for call set up to be completed. This number can be set for any value up to a maximum of 255 seconds (with a default to 60 seconds).
The 8400B Plus Data Module You can check the current value stored in all S-registers with the &V command. To look at the contents of just one register, use the command Smm? where “mm” is the number of the S-register. The data module will return 3-digits, representing the decimal value of the specified S-register. To change the value in any one S-register directly, use the command Smm=nnn where “mm” is the number of the S-register and “nnn” is the number you wish to place in the register.
Data Modules For those PC packages used to dial voice calls, the modem configuration must be set to PULSE (P) (even though the 8400B Plus will use Touch-Tone for voice calls). If given a choice, set modem type to HAYES. NOTE: While the 8400B Plus supports simultaneous voice and data, the packages listed here support alternate voice/data dialing only. Voice dialing packages interfere with data operation by remapping the COM port or by hanging up the data call.
The 7500B Data Module DTR DSR DCD RTS CTS TD RD PORT The 7500B Data Module 1 3 POWER/TEST 5 7 9 11 13 15 ISDN 7500 HOME NEXT / NO Figure 21-9. BACK ENTER / YES DATA The 7500B Data Module The 7500B Data Module is a terminal adapter primarily intended for connecting DTE or DCE to the ISDN network. It can be configured in a number of ways to allow the attached DTE and DCE to send and receive data through the digital network. The 7500B has no voice functions.
Data Modules Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front and rear) = 8-3/4 inches Height = 1-3/4 inches Features Lights The 7500B data module has the following light indications: ■ POWER/TEST Light — This red light goes on when the 7500B data module is on and flashes during all tests. ■ DATA Light — This green light goes on when a data call is in progress.
The 7500B Data Module ■ COMMUNICATIONS PORT 1 AND 2 — Port 1 is used to connect the 7500B to a data terminal, computer or modem. Depending upon which enhancement board is installed, port 2 can be used to connect automatic calling equipment (RS-366 interface) or a data terminal equipment with a V.35 interface. Mounting Options The 7500B data module can be configured as a stand-alone unit or in a multiple-mount housing. Color Options The 7500B data module is available in misty cream only.
Data Modules ■ Synchronous half-duplex emulation at 1.2 to 56 kbps ■ Automatic answering of incoming data calls ■ RS-366 ACU interface ■ Autodial The synchronous DCE features with the High Speed Synchronous Enhancement Board are as follows: ■ V.
The ISDN Asynchronous Data Module (ADM) The ISDN Asynchronous Data Module (ADM) The ISDN ADM is used in conjunction with an ISDN 7505, 7506, or 7507 voice terminal to provide integrated voice/data. With the ADM, an attached data terminal or personal computer can send and receive data through the switch. This unit mounts in the base of the voice terminal and is used instead of the Voice Only Module (VOM). The VOM cannot be upgraded to an Asynchronous Data Module.
Data Modules Power Requirements Refer to the Power Requirements description in the ISDN 7505, 7506, and 7507 Voice Terminal section of this manual. (This information is located behind the tab labeled ISDN Voice Terminals.) ISDN ADM PECs Refer to the PEC list in the ISDN 7505, 7506, and 7507 Voice Terminal section of this manual.
The Digital Terminal Data Module (DTDM) The Digital Terminal Data Module (DTDM) Digital Terminal Data Module (DTDM) Conference 192K TERMINAL READY 9600 CALL IN PROGRESS 4000 CARRIER ON Transfer Drop Hold ABC DEF GHI JKL MNO 4 5 1 PRS 7 * 2 TUV 8 Oper O 2400 3 6 1200 TEST IN PROGRESS 300 CHECK OPTIONS WXY 9 # LOW Message Recall Disconnect DATA CALL ORIGINATE/ DISCONNECT 7405 Voice Terminal Figure 21-10.
Data Modules Addition of a DTDM allows an in-place 7403D or 7405D voice terminal to be upgraded for data communications at low cost. Digital Switch DCE DTE Data Terminal Figure 21-11. RS-232C DTDM Digital Voice Terminal DCP Digital Line Port A Block Diagram of DTDM Interfaces Physical Description The DTDM is contained in a molded plastic housing styled to match the associated voice terminal. Status lights, switches, and controls are located on the faceplate and behind a hinged side cover.
The Digital Terminal Data Module (DTDM) Features Lights The DTDM is equipped with the following lights: ■ Terminal Ready ■ Call in Progress ■ Carrier On ■ Test in Progress ■ Check options ■ Receive Data ■ Send data ■ Test Result Speed Indicator lights The DTDM is equipped with seven indicator lights that show the speed at which the DTDM is operating. Switches The following switches can be used on the DTDM.
Data Modules Capabilities The DTDM offers the following features and capabilities: ■ Synchronous and asynchronous operation ■ Half- and full-duplex operation ■ Data transmission at standard rates up to 19.2 kbps ■ Automatic answer option ■ Self-test ■ Remote and local loopback Power The DTDM requires auxiliary power from one of the sources listed in the Adjunct Power section earlier in this manual. FCC Registration The DTDM is not FCC registered.
The Z702AL1 Data Service Unit (DSU) The Z702AL1 Data Service Unit (DSU) SPEED Figure 21-12. TEST RESULTS PARITY TEST/DISC EVEN-ODD The Optional Z702AL1 Data Service Unit Shown with a 7407D01B Voice Terminal The Z702AL1 DSU, when connected to the 7407D01B voice terminal, allows the user to transmit and receive voice and data over the same standard two pair of wires.
Data Modules Digital Switch DCE DTE Data Terminal Figure 21-13. RS-232C Data Service Unit Digital Voice Terminal DCP Digital Line Port A Block Diagram of Z702AL1 Data Service Unit Interfaces Applications The Z702AL1 DSU can be used with a 7407D01B voice terminal connected to the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85. Typical applications are users with data terminals requiring a large number of features and lines.
The Z702AL1 Data Service Unit (DSU) Other Physical Features Mounting Options The optional Z702AL1 DSU Data Module Base is installed on the 7407D01B voice terminal. Color Options The DSU is available in black only. Capabilities The Z702AL1 DSU provides the following features: ■ Selector for standard data rates of 0.3, 1.2, 2.4, 4.8, 9.6, and 19.
Data Modules Z702AL1 DSU PECs The Z702AL1-DSU can be ordered using the following PEC: ■ Z702AL1 DSU—31800A Additional Documents The following documents contain additional information relating to the DSU: 21-44 ■ DEFINITY Generic 2 and System 85 7407D Voice Terminal User’s Guide, 555-104-705 ■ System 85 Application Notes, 555-102-515 ■ System 75 Application Notes, 555-209-006 ■ DEFINITY Generic 1 7407D Voice Terminal User’s Guide, 555-204-716 ■ System 75 7407D Voice Terminal User’s Guide, 555-2
The 703A Data Service Unit (DSU) The 703A Data Service Unit (DSU) Figure 21-14. The 703A Data Service Unit The 703A DSU is used with the 7406D voice terminal to provide asynchronous data communications through the switch. The DSU replaces the desk stand under the 7406D voice terminal and allows a data terminal (such as a 610 BCT) to be connected to the 7406D and data calls to be made to and from the switch. (See Figure 21-15.
Data Modules Digital Switch DCE DTE Data Terminal Figure 21-15. RS-232C Data Service Unit Digital Voice Terminal DCP Digital Line Port A Block Diagram of 703A Data Service Unit Interfaces Applications The 703A DSU can be used with 7406D voice terminal connected to the DEFINITY Communications System Generic 1, Generic 2, Generic 3, the DEFINITY ECS, System 75, or System 85. Typical applications are users with data terminals requiring a large number of features.
The 703A Data Service Unit (DSU) Other Physical Features Jacks The DSU contains four jacks. The handset cord jack is on the bottom of the DSU housing just under the left side of the housing. The mounting cord jack and the audio cord jack are on the bottom of the DSU housing just under the rear of the housing. The RS-232-C connector is on the rear of the DSU. Mounting Options The optional 703A Data Service Unit Data Module Base is installed on the 7406D Voice Terminal.
Data Modules Power The 703A DSU requires an external power source. Refer to the Adjunct Power section earlier in this manual for the correct power source.
The DEFINITY High Speed Link RD TD CTS RTS DCD RI DSR DTR The DEFINITY High Speed Link HOME POWER/ TEST Figure 21-16. NEXT / NO DEFINITY High Speed Link BACK ENTER / YES DATA The DEFINITY High Speed Link The DEFINITY HSL is a data service unit that allows data equipment to access the data services of System 75 and System 85 and the DEFINITY switch. It is used where the integration of voice and data is not required.
Data Modules Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 7 inches Depth (front and rear) = 9-1/4 inches Height = 1-3/4 inches Weight = 1 pound 5 ounces Features Lights The DEFINITY HSL is equipped with the following lights: ■ POWER/TEST light — This red light goes on steadily when there is power to the HSL; winks during all tests; and flashes with the DATA light for line fault indication.
The DEFINITY High Speed Link Tests The DEFINITY HSL supports the following tests and maintenance features: ■ Self-test ■ Local loopback ■ Data loopback ■ Remote loopback (V.54 and AT&T proprietary protocol) ■ Remote loopback with self-test ■ DCP looparound test ■ DDS latching/non-latching loopback Connectors The following connectors are located on the rear panel of the HSL: ■ RS-366/RS-232 (user must provide interface cable) ■ V.
Data Modules ■ RS-366 ACU interface for originating data calls ■ RS-232 AT command interface with autobaud for originating and disconnecting calls ■ Test features for system fault isolation ■ Non-volatile memory for storing an option profile and four telephone numbers ■ Reset options for easy loading of default options ■ Data inversion option for compatibility with older 64 kbps DCP data modules ■ Automatic or manual answer option ■ DTR lead ignore option for operation with terminals that no
The DEFINITY High Speed Link Switched Endpoints The DTE must be capable of communicating at 56 kbps or 64 kbps. Proper switched operation requires that the DTE supports a Data Terminal Ready (DTR) lead on its V.35 interface. The DTR lead provides the signal to the HSL that it is ready to receive or originate a call. Before the High Speed Link can originate (dial) or answer a call, the DTR lead must be asserted (high) by the DTE. In addition, the DTE uses the DTR lead to signal the HSL to drop a call.
Data Modules Permanent (Private Line) Requirements The following sections describe Permanent (Private Line) requirements. Releases for Permanent Applications Permanent applications require the switch to establish and maintain the connection.
The DEFINITY High Speed Link Cluster Controller V.35 Access Endpoint DSU DDS56 V.35 DCP HSL Front End Processor V.35 HSL Private Line Network DCP DEFINITY G3 Figure 21-18. DCP HSL V.35 Cluster Controller DEFINITY G2 Permanent (Private Line) Applications Power The DEFINITY HSL is powered by an external power supply. The connection to the power supply uses a six position male connector with one pin removed for polarization.
Data Modules Considerations The DEFINITY HSL will not support the following: ■ Asynchronous data transmission ■ Integrated voice and data FCC Registration Digital phones and data modules are not FCC registered. The DEFINITY HSL meets FCC Part 15 approval, and is labeled as such.
The Processor Data Module (PDM) The Processor Data Module (PDM) POWER TERMINAL READY LINE STATUS CALL IN PROGRESS CARRIER ON PDM TEST IN PROGRESS Figure 21-19.
Data Modules Physical Description Features Switches The PDM is equipped with the following switches: ■ Originate/Disconnect — This switch is located on the front panel. It is used when originating and disconnecting from a call. ■ Self-Test — This switch is located behind the front faceplate. Pressing this button performs the self-test. ■ LOC LOOP/REM LOOP — This switch is located behind the faceplate. It is used to perform the Local loop test or Remote loop test.
The Processor Data Module (PDM) Capabilities The PDM offers the following features: ■ Synchronous or asynchronous operation ■ Full- or half-duplex operation for data calls up to 56 kbps ■ Full-duplex operation for data calls at 64 kbps ■ Data transmission at standard rates up to 19.2 kbps ■ Automatic answer option ■ Self-test Power Both mounting arrangements require power from a 115-volt AC receptacle to power the PDM(s).
Data Modules The Trunk Data Module (TDM) POWER DATA SET CALL IN READY PROGRESS LINE STATUS CARRIER ON TRUNK DATA MODULE TEST IN PROGRESS Figure 21-20. ORIGINATE DISCONNECT CHECK OPTIONS The Trunk Data Module, the Stand-alone Model The TDM provides an RS-232-C DTE interface for connection to off-premises private line trunk facilities or a switched network telecommunications network and a DCP interface for connection to the digital switch.
The Trunk Data Module (TDM) The TDM can serve as part of a conversion resource for modem pooling. The conversion resource performs the analog-to-digital and digital-to-analog conversions that allow the analog and DCP data endpoints to communicate. A single conversion resource consists of a modem and a TDM connected at the RS-232-C interface. NOTE: The TDM can no longer be ordered. It has been replaced by the MTDM.
Data Modules Other Physical Features Capabilities The TDM offers the following features and capabilities: ■ Synchronous or asynchronous operation ■ Full- or half-duplex ■ Selected standard data rates up to 19.2 kbps ■ Automatic answer ■ Self-test Mounting Options The TDM can be configured either in a stand-alone or in a multiple mounted version. The stand-alone version is installed in a 70A Data Mounting aluminum housing that is equipped with plastic front and rear covers.
The Modular Processor Data Module (MPDM) The Modular Processor Data Module (MPDM) POW ER TER REAMINA TES DY L T IN PR OG LIN RESS STAE OR TUS DISIG/ C MPD AC M CU NE T® CH EC SEN D D OPTIOK ATA NS CA PRLL IN RE OG CE RE IVE SS DAT A CA ONRRIER Figure 21-21. The Stand-Alone Modular Processor Data Module The MPDM is a multi-purpose data module configured to provide the digital switch interface to support various data interface requirements. The MPDM is similar in appearance and function to the PDM.
Data Modules The MPDM can be configured to support the Data Call Setup or Off-Premises Data-Only Extensions features. In addition to standard data transmission rates supported by previous versions of the PDM’s (0.3, 1.2, 2.4, 4.8, 9.6, and 19.2 kbps), the MPDM supports data rates of 56 and 64 kbps. The individual piece parts for the MPDM can be purchased either separately or in one of the three different preassembled packages described below.
The Modular Processor Data Module (MPDM) General Features of the MPDM Both the MPDM stand-alone and multiple mount versions are contained in a 70A Data Mounting aluminum housing that is equipped with plastic front and rear covers.
Data Modules Switches The MPDM is equipped with the following switches: ■ ORIGINATE/DISCONNECT — This switch is located on the front panel. It is used when originating and disconnecting a call from a terminal that does not have a BREAK key. ■ SELF-TEST — This switch is located behind the front faceplate. It is used to perform the self-test. ■ LOC LOOP/REM LOOP — This switch is located behind the faceplate. It is used to perform the Local loop test or Remote loop test.
The Modular Processor Data Module (MPDM) Features of the AUDIX/CMS MPDM Package Functional Elements This preassembled package consists of the following parts: ■ ■ Stand-alone housing Modular PDM ■ RS-232 interface card ■ Option Switch Settings Since the AUDIX/CMS MPDM is preassembled, you will need only to make the connections to the PBX, and set the DIP switches. Use the following table to verify that the DIP switch settings connected to AUDIX or CMS are correctly set. Table 21-2.
Data Modules Features of the Video Teleconferencing MPDM Functional Elements The preassembled Video Teleconferencing MPDM consists of the following parts:. ■ Stand-alone housing ■ Modular PDM ■ V.35 interface card ■ RS-366 ACU interface card ■ V.35 M1 (ACCUNET D-Kit) NOTE: The label on the front of this MPDM renames the data module from “MPDM” to “MPDM ACCUNET.” Option Settings The Video Teleconferencing MPDM offers a new option switch, OFF/ANET.
The Modular Processor Data Module (MPDM) The Video Teleconferencing MPDM requires the following DIP switch settings for operation with ACCUNET Switched 56 kbps Digital Service or non-MPDM endpoints. Table 21-3. * † DIP Switch Settings on the Video Teleconferencing MPDM DIP Switch Setting OFF/LOW OFF OFF/300 OFF OFF/1200 OFF OFF/2400 OFF OFF/4800 OFF OFF/9600 OFF OFF/19.
Data Modules Features of the High Speed Synchronous MPDM Optional Interface Cards There are two optional interface cards can be used with this MPDM package: ■ V.35 — Normal DTR operation — Endpoint controls (asserts) the DTR lead ■ V.
The Modular Processor Data Module (MPDM) The baud rate depends on the setting of the speed option switches. When using ACCUNET Switched 56 kbps Digital Service, OFF/56K must be set to 56K. All other speed switches must be set to OFF. NOTE: Only one speed selection is allowed when the OFF/ANET switch is set to ANET. When FDX/HDX is set to HDX (half-duplex), it can be used only on a 64 kbps facility, such as alternate voice/data trunk, PRI facility, or switched-64.
Data Modules ■ RS-366 ACU interface card PEC: 21614 Comcode: 103954582 ■ V.35 DTR interface card (This card has DTR always on.) PEC: 21615 Comcode: 105218101 ■ V.
The Modular Trunk Data Module (MTDM) The Modular Trunk Data Module (MTDM) POWER DATA SET READY TEST IN PROGRESS LINE STATUS ORIG/ DISC MTDM CHECK OPTIONS RECEIVE DATA CALL IN PROGRESS SEND DATA CARRIER ON Figure 21-22. The Modular Trunk Data Module, the Stand-alone Model Similar in appearance and function to the TDM, the MTDM is a multi-purpose data module configured to provide the digital switch interface to off-premises private line trunk facilities or a switch network telecommunications network.
Data Modules The MTDM can be configured to support the Data Call Setup, Modem Pooling, or Off-Premises Data-Only Extensions features. In addition to the standard data transmission rates supported by previous versions of the TDM (0.3, 1.2, 2.4, 4.8, 9.6, and 19.2 kbps), the MTDM supports data rates of 56 and 64 kbps for downloading and other high speed data transfer requirements.
The Modular Trunk Data Module (MTDM) ■ Send Data ■ Receive Data Other Physical Features Mounting Options The MTDM can be configured either in a stand-alone or a multiple mounted version. The stand-alone version is contained in a 70A Data Mounting aluminum housing that is equipped with plastic front and rear covers. A maximum of eight MTDMs may be installed in the 71A Data Mounting. The stand-alone version can be mounted on a surface or desk top near the associated data equipment.
Data Modules Additional Documents The following documents contain additional information relating to the MTDM: 21-76 ■ Modular Trunk Data Module User’s Guide, 999-700-301 ■ DEFINITY Generic 1 and Generic 2, System 75, and System 85 Terminals and Adjuncts Installation and Test, 555-015-104 Issue 11 December 1999
The 3270 Data Module The 3270 Data Module TERMINAL COMPUTER FAULT Originate/Disconnect Switch Figure 21-23. The 3270A or 3270T Data Module The 3270 Data Module provides a Category A coaxial DCE interface for connection to 3270-type data terminals or a cluster controller. It also provides a DCP interface for connection to the digital switch.
Data Modules 3270C Data Module 4 3 2 1 PORT A PORT B B U S Y Figure 21-24.
The 3270 Data Module The 3270A and 3270T Dimensions NOTE: The following dimensions are approximate. Width = 5-3/4 inches Depth (front to back) = 9-1/4 inches Height = 1-1/2 inches Lights The following is a list of the lights on the 3270A and 3270T.
Data Modules Cords A D8W-87 cord is provided with the data module. The coaxial cable with BNC male connectors for use between the data module and the terminal is customer provided. If an analog telephone is to be connected, the required modular cord must be provided with the telephone. Power An external power supply and the required cord is provided with the data module. The power supply requires a 115-volt AC wall receptacle not under the control of a wall switch.
The 3270 Data Module Connectors The 3270 has the following connectors: ■ Power ■ DCP ■ Port — The port connectors are labeled 1A, 2A, 3A, 4A, 1A, 1B, 1C, and 1D.
Data Modules Mounting Options The data module assembly may be stacked, wall mounted, or rack mounted near the cluster controller to which it is connected. Cords A 7-1/2 foot AC power cord is provided with the unit. A 25-pair cable for the connection to the DCP connector must be ordered separately. The coaxial cable with BNC connectors for connection to the cluster controller must be provided by the customer.
The Asynchronous Data Unit (ADU) The Asynchronous Data Unit (ADU) RS-232C Connector Interface Telephone Jack Wall Jack Optional Originate/ Disconnect Switch Figure 21-25. The Z3A Asynchronous Data Unit The Z3A ADU is a small DCE-type limited-distance modem that allows direct connection between RS-232 equipment and the system digital switch.The Z3A ADU is a small DCE-type limited-distance modem that allows direct connection between RS-232 equipment and the system digital switch.
Data Modules Physical Description Dimensions NOTE: The following dimensions are approximate. Width = 2-1/4 inches Depth = 4-3/4 inches Height = 1 inch Features Switch An optional Originate/Disconnect switch can be used with the Z3A1, Z3A2, and Z3A4 ADUs. Other Physical Features Jacks The ADU has the following jacks: ■ Originate/Disconnect The Z3A1/2/4 are equipped with a jack used to connect the optional Originate/Disconnect switch.
The Asynchronous Data Unit (ADU) Refer to the following table for the different data and RS-232 connections. Table 21-4. Data Connections for the ADU ADU Model Connector to RS-232 Data Connector Z3A1 25-pin plug on 3-foot cable Modular Z3A2 25-pin plug (no cable) Modular Z3A3 110-type patch cord 110-type patch cord Z3A4 25-pin receptacle on 3-foot cable Modular Capabilities The ADU has the following data capabilities. ■ Speed — Standard data rates from 0.3 to 19.
Data Modules Z3A Data Module PECs The Z3A Data Module and optional components can be ordered with the following PECs: ■ Z3A1 Asynchronous Data Module — 2169-001 ■ Z3A2 Asynchronous Data Module — 2169-002 ■ Z3A3 Asynchronous Data Module — 2169-003 ■ Z3A4 Asynchronous Data Module — 2169-004 ■ Originate/Disconnect Switch — 21692 ■ ADM Mounting Trough — 21693 Additional Documents The following document contains information relating to the Z3A Data Module: ■ 21-86 Asynchronous Data Unit Z3A User’s
The Multiple Asynchronous Data Unit (MADU) The Multiple Asynchronous Data Unit (MADU) The MADU provides an RS-232-C compatible, full-duplex, asynchronous data interface which provides host computer access for a variety of DTE devices. The MADU converts information sent to it from a host computer in RS-232-C protocol to low-voltage signals. These signals can be transmitted over standard building wiring or to the switch over much greater distances than regular EIA signals may travel.
Data Modules Dimensions — MADU circuit pack NOTE: The following dimensions are approximate. Width = 1-3/4 inches Length = 11-1/4 inches Height = 7-3/4 inches Features Switch Each port on each circuit pack has a MK BUSY switch on the faceplate. Each MADU circuit pack contains a 10-position Dual In-line Package (DIP) switch to activate or disable options.
The Multiple Asynchronous Data Unit (MADU) Mounting — Multiple mount The multiple-mount MADU may be rack or cabinet mounted. The MADU may be mounted in 19, 23, or 25 inch racks. If the MADU is to be mounted in a cabinet, the cabinet must be 23 or 25 inches wide to provide clearance for the cabling. Power Each MADU circuit pack is powered from an individual transformer which is plugged into an AC power source. The transformer may be plugged directly into a wall outlet for four or fewer units.
Data Modules DCIU Interface Units The three interface units used in a DEFINITY Communications System Generic 2 and System 85 DCIU link are the 105A Isolating Data Interface (IDI), the 48250 Local Distribution Service Unit (LDSU), and the 2500-Series Data Service Unit (DSU). 105A IDI The IDI is a miniature connection unit for point to point, synchronous, full-duplex operation between the DCIU and an external processor. The DCIU and the external processor can be a maximum of 400 feet apart.
The 2500-Series DSU The 2500-Series DSU The 2500-Series DSUs allow the user’s computer or DTE to communicate with remotely located equipment using Digital Data Service network lines. The DSU integrates all Channel Service Unit (CSU) and DSU functions into one unit and connects between the network interface and the user’s DTE. The DSU can operate as a point-to-point Local Area Data Set (LADS). It is used when the DCIU and external processor are more than 400 feet apart.
Data Modules Mounting The 2500-Series DSU can be stand-alone or multiple mounted. The stand-alone units can be wall or desk mounted. The multiple mounted units are mounted in a multiple-mount housing that can house up to eight DSUs. Power The stand-alone units are provided with a WP90131-L2 power pack. This power pack is plugged into a 115-volt AC wall receptacle not under the control of a wall switch.
PC Platforms (PC/PBX and PC/ISDN) and Application Software 22 This section describes the devices that provide the ability to bring the PC and telephone together in a partnership of integrated voice and data.
PC Platforms (PC/PBX and PC/ISDN) and Application Software PC Platforms (PC/PBX and PC/ISDN) Today, professional PC users seek to realize the promise of desktop computing productivity by accessing multiple data sources — local and remote, internal and external. Lucent Technologies PC Platforms provide both a high speed connection to the PC and an open software interface for creating applications that use the connection.
PC Platforms (PC/PBX and PC/ISDN) PC/PBX and PC/PBX MicroChannel Platforms The PC/PBX platforms provide standalone PC users with a fully integrated networking solution that brings the benefits of high-speed, error free digital communications to the desktop. The PC/PBX platform supports existing configurations in which both the voice terminal and the PC are connected to the PBX via a single DCP line.
PC Platforms (PC/PBX and PC/ISDN) and Application Software ■ Advanced phone management capabilities including: — Incoming call identification — Personal directory with up to 32,000 entries — Keyboard dialing — Messaging — Call log and notes — Switch feature access — Multiple call appearances PC/PBX PECs The PC/PBX platform package can be ordered using PEC 8302-101. The PC/PBX MicroChannel Architecture platform package can be ordered using PEC 8302-105.
PC Platforms (PC/PBX and PC/ISDN) Capabilities Used in conjunction with PC applications software, the PC/PBX Platform provides the hardware architecture at the desktop for: ■ High-speed PC-to-PC communication ■ Access to asynchronous host environments ■ Access to the synchronous 3270 environment ■ Advanced telephone management capabilities In addition, the PC/ISDN Platform supports the capabilities of the ISDN-BRI 7500 Series voice terminals including: ■ Conference, Transfer, Hold, and Drop ■ Up
PC Platforms (PC/PBX and PC/ISDN) and Application Software PC/PBX Connection The PC/PBX Connection application software offers the users of IBM compatible PCs the voice and data capabilities of a fully integrated voice and data workstation. Applications The PC/PBX Connection application software can be used with the DEFINITY Communications System Generic 1, Generic 2, and Generic 3, the DEFINITY ECS, System 75, and System 85.
PC/PBX Connection PC/PBX PECs The PC/PBX Connection can be ordered using the following PECs: ■ PC/PBX Connection Software — 1211-101 ■ PC/PBX Connection Hardware (PC/PBX Platform) — 8302-101 ■ PC/PBX Connection Hardware (PC/PBX MicroChannel Platform) — 8302-105 Additional Documents The following documents contain additional information relating to the PC/PBX Connection: ■ PC/PBX Connection Release 3 Documentation Set, 555-016-715 ■ PC/PBX Connection Installation and Reference, 555-016-201 ■ PC/P
PC Platforms (PC/PBX and PC/ISDN) and Application Software E78 Plus/ISDSN Software The E78 Plus/ISDN is a 3270 terminal emulation and file transfer package for micro-mainframe connectivity. However, its use in remote applications was, until recently, limited because of low-speed connections between locations.
E78 Plus/ISDSN Software In addition, E78 Plus/ISDN provides productivity extras professionals expect, such as: ■ Keyboard Macros. Frequently repeated commands and complex data strings can be stored on the keyboard. The same key can store different macros for DOS and 3270 emulation. ■ Keyboard Remap. This utility lets the user easily modify keyboard layouts and create new ones for new applications. ■ Hot Keys.
PC Platforms (PC/PBX and PC/ISDN) and Application Software 22-10 Issue 11 December 1999
Blank Templates for Model Design 23 The Software Associate can use the following blank templates to create models for administering groups of terminals at a customer site. Use the following procedures for filling out these forms. 1. In each button space write the telephone number, extension, feature code, or feature to be administered on that button. Note that some of the voice terminals have double-level buttons on which you can designate two features. 2.
Blank Templates for Model Design ■ 7406BIS ■ 7406 Plus ■ 7407D ■ Enhanced 7407D ■ 7407 Plus ■ 7410D ■ 7410 Plus ■ 7434D ■ 7444 ■ 8403 ■ 8405B and 8405B Plus ■ 8405D and 8405D Plus ■ 8410B ■ 8410D ■ 8411B ■ 8411D ■ 8434 and 8434DX ■ 801A Expansion Module ■ 602 CALLMASTER ■ CALLMASTER II and III (603) ■ CALLMASTER IV ■ CALLMASTER V ■ CALLMASTER VI ■ ISDN 7505 ■ ISDN 7506 ■ ISDN 7507 ■ ISDN 8503T ■ ISDN 8510T ■ ISDN 8520T 23-2 Issue11 December 1999
MODEL NAME: __________________________ Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 O # Volume The 6408+ Telephone Software Associate: ______________ Customer Approval: ______________________ Project Code: ___________________ Date: __________________________________
MODEL NAME: __________________________ Menu Exit Prev Next Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 O # Volume The 6408D+ Telephone Software Associate: ______________ Customer Approval: ______________________ Project Code: ___________________ Date: __________________________________
MODEL NAME: __________________________ Menu Exit Prev Next Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 O # Volume The 6416D+ and 6416D+M Telephone Software Associate: ______________ Customer Approval: ______________________ Project Code: ___________________ Date: __________________________________
MODEL NAME: __________________________ Menu Exit Prev Next Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 O # Volume The 6424D+ and 6424D+M Telephone Software Associate: ______________ Customer Approval: ______________________ Project Code: ___________________ Date: __________________________________
MODEL NAME: ____________________ Select Message Conference Ring Transfer Drop Hold Test ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 4 7 * Speaker 2 5 8 Oper O 3 6 9 # Volume The 7402 Plus Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Select Ring Shift Message Conference Transfer Drop Hold ABC DEF GHI JKL MNO PRS TUV WXY 1 4 7 * 2 5 8 Oper O 3 6 9 # Speaker The 7406D Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Speaker Mute Select Ring Shift Message Conference Transfer Drop Hold ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PRS TUV WXY 7 8 9 * Oper O # Speaker Volume The 7406BIS Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Speaker Reset Spkr Mute Message Select Conference Ring Transfer Drop Test Hold ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * Oper O # Volume The 7406 Plus Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Transfer Drop Hold P R C/ CE M R ABC DEF 1 2 3 GHI JKL MNO 4 PRS 7 * 5 TUV 8 Oper O 6 M M + + WXY 9 X # + Display Message Speakerphone Calculator Select Ring Microphone ✓ = The 7407D Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Transfer Drop Hold ABC DEF 1 2 3 GHI JKL MNO PRS TUV WXY Oper # 4 7 * Message Volume Speaker 5 8 O 6 9 Select Ring Mute The Enhanced 7407D Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Ring Transfer Drop Hold Test ABC DEF 1 2 3 GHI JKL MNO PQRS TUV WXYZ Oper # 4 7 * Volume 5 8 O 6 9 Message Select Speaker Reset/Spkr Mute The 7407 Plus Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Transfer Drop Hold ABC DEF GHI JKL MNO PRS TUV WXY 7 8 9 1 4 * Message 2 5 Oper O 3 6 # Select Ring The 7410D Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Select Message Conference Ring Transfer Drop Hold Test ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 4 7 * Speaker 2 5 8 Oper O 3 6 9 # Volume The 7410 Plus Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Transfer Hold Drop ABC DEF 2 3 GHI JKL MNO 4 5 6 PRS TUV WXY 7 8 9 Oper # 1 * Message O Select Ring The 7434D Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Ring Transfer Drop Test Hold ABC DEF 1 2 3 GHI JKL MNO PQRS TUV WXYZ Oper # 4 7 * Volume 5 8 O 6 9 Message Select Speaker Reset/Spkr Mute The 7444 Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME:_________________ 8403 F1 F7 F2 F8 F3 F9 F4 F* F5 F0 F6 F# a b c Message Volume ABC DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * O # Feature Transfer 1 Test Conf Mute Drop Speaker Hold Ring The 8403 Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 8405B Volume ABC DEF 1 2 3 Shift Transfer GHI MNO Conf 4 JKL Test Mute Drop PQRS TUV WXYZ 7 8 9 Speaker Hold * O # 5 6 The 8405B and 8405B Plus Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ Menu Exit Prev Next Volume Shift Transfer ABC DEF 1 2 3 GHI JKL MNO Test Conf 4 5 6 Mute Drop PQRS TUV WXYZ 7 8 9 Speaker Hold * O # The 8405D and 8405D Plus Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 8410B Message Volume ABC DEF 1 2 3 Shift Transfer GHI JKL MNO Test Conf 4 5 6 Mute Drop PQRS TUV WXYZ 7 8 9 * O # Hold Reset Spkr Ring Speaker The 8410B Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 8410D Exit Menu Prev Next Message Volume ABC DEF 1 2 3 Shift Transfer GHI JKL MNO Test Conf 4 5 6 Mute Drop PQRS TUV WXYZ 7 8 9 Speaker Hold * O # Reset Spkr Ring The 8410D Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 8411B Message Volume ABC DEF 1 2 3 Shift Transfer GHI JKL MNO Test Conf 4 5 6 Mute Drop PQRS TUV WXYZ 7 8 9 Speaker Hold * O # Reset Spkr Ring The 8411B Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 8411D Exit Menu Prev Next Message Volume ABC DEF 1 2 3 Shift Transfer GHI JKL MNO Test Conf 4 5 6 Mute Drop PQRS TUV WXYZ 7 8 9 * O # Speaker Ring Hold Reset Spkr The 8411D Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 8434DX Menu Exit Prev Next Message Volume Shift Transfer Test Conf Mute Drop Speaker Hold Reset Spkr Ring ABC DEF GHI JKL MNO PQRS TUV WXYZ 7 8 9 * O # 1 4 2 5 3 6 The 8434 and 8434DX Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ 801A The 801A Expansion Module Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME: ____________________ Conference Transfer Drop Hold ABC DEF 1 2 3 GHI JKL MNO PRS TUV WXY Oper # 4 7 Message * 5 8 O 6 9 Mute The 602 CALLMASTER Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME:_________________ Conference Transfer Ring Drop Hold Test Message ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 2 4 5 7 8 Oper * O Select 3 6 9 # Volume Mute Log In Release CALLMASTER The CALLMASTER II and CALLMASTER III Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME: ____________________ Select Volume CALLMASTER IV Conference Ring Transfer Message Drop Test ABC DEF 1 2 3 GHI JKL 4 5 PQRS Mute TUV MNO 6 WXYZ 7 8 9 * O # Log In Hold Release The CALLMASTER IV Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: __________________________ Menu Exit Prev Next Tel # Speaker Mute Hold Redial Transfer Conf Test Ring ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 O # Volume The CALLMASTER V Console Software Associate: ______________ Customer Approval: ______________________ Project Code: ___________________ Date: __________________________________
MODEL NAME:_________________ CALLMASTER VI Headset On / Off Mute Message a= b= Release The CALLMASTER VI Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME: ____________________ Message Conference Ring Transfer Drop Test Hold Redial 1 ABC DEF 2 3 Select GHI JKL MNO 4 5 6 Mute PRS TUV WXY 7 8 9 Speaker * Oper O # Volume The ISDN 7505 Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Message Data/Send/Off Conference Ring Transfer Clock Drop Test Hold Redial 1 ABC DEF 2 3 Select GHI JKL MNO 4 5 6 Mute PRS TUV WXY 7 8 9 Speaker * Oper O # Volume The ISDN 7506 Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME: ____________________ Conference Ring Transfer Clock Drop Test Hold ABC DEF 1 2 3 GHI JKL MNO PRS TUV WXY Oper # 4 7 * Message Volume Speaker 5 8 O 6 9 Select Mute Redial Data/Send/Off The ISDN 7507 Voice Terminal Software Associate: ____________________ Customer Approval: __________________ Project Code: _________________________ Date: ______________________________
MODEL NAME:_________________ Press Memory button, then dialpad button 1 5 9 2 6 0 3 7 4 8 * a b # c Volume Message Mute Redial Program Memory Conf Drop Ring Test Transfer Hold Pause ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 OPER # * O The ISDN 8503T Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ Menu Dir Prev Next a f b g c h d i e j Message ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 Volume Mute Redial Speaker Exit Conf Drop Transfer Hold * Oper # O The ISDN 8510T Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
MODEL NAME:_________________ ISDN 8520T Menu Dir Prev Next a f k p b g l q c h m r d i n s e j o t Volume Mute Redial Speaker Exit Conf Drop Transfer Hold ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 * Oper O Message # The ISDN 8520T Voice Terminal Software Associate:_______________ Customer Approval:_______________ Project Code:____________________ Date:___________________________
