Instruction manual

CHAPTER 7. SYSTEM BACKUP FOR DEFINITY G1 AND G3i
6. Internal translation data is corrupted
Indicates that the translation data is inconsistent and the translation was not saved on
tape.
Response: Replace cassette tape with system backup tape.
Enter the command reset system 3. After the command completes, remove the backup
tape, install the original tape, and then repeat the command that generated the error
message. Notify maintenance support if the same error message is displayed again.
7.
Translation file is too large to fit on tape
Indicates that the system software has malfunctioned.
Response: Notify maintenance support.
7-7