Instruction manual
CHAPTER 5. ADMINISTRATIVE TASKS-VOICE TERMINAL
●
7303S, 7305S, or 7309H Voice Terminals:
Up to eight voice terminals can be assigned
to one TN762 Hybrid Line circuit pack.
●
7302H01B, 7303H01B, 7305H01B, or 7305H02B Voice Terminals:
Up to eight voice
terminals can be assigned to one TN762 Hybrid Line circuit pack.
●
ISDN 7505, 7508, or 7507 Voice Terminals:
In a multipoint configuration, up to 24 voice
terminals can be assigned to the ISDN-BRI circuit pack TN556. In a point-to-point confi-
guration, 12 voice terminals can be assigned.
●
ISDN 8503T Voice Terminal:
In a multipoint configuration, up to 24 voice terminals can
be assigned to the ISDN-BRI circuit pack TN556. In a point-to-point configuration, 12
voice terminals can be assigned.
●
10, 20, or 30 MET Sets:
Up to four voice terminals can be assigned to one TN735 Met
Line circuit pack.
●
CALLMASTER® Digital Voice Terminals:
Up to eight CALLMASTER digital voice ter-
minals can be connected to a TN754 or TN784 Digital Line circuit pack.
A voice terminal cannot have display buttons without having a display module.
Voice Terminal Commands
The following information explains how voice terminal commands are used to administer voice
terminals.
Add a Voice Terminal
Two processes are used to add a voice terminal: 1) physically installing the voice terminal and
2) adding voice terminal translations to memory. Adding translations to memory tells the system
the characteristics you want associated with the voice terminal and allows processing calls to and
from the voice terminal.
Note: Digital-type voice terminals should be assigned in the system before analog-type ter-
minals.
●
To add a voice terminal to the system, enter
add station 3222.
In this example,
add
is the action command,
station
is the object, and
3222
is the qualifier (value). By adding
a qualifier (3222), the system automatically assigns 3222 as an extension number in the
Extension #
field on the form. Once the Voice Terminal form appears on the screen,
you can enter the desired data for that voice terminal.
When entering the command to add a voice terminal, the system checks to see if the extension
number is already assigned and if it is a valid extension number. If the extension number is
already assigned, the system responds with
Extension Already Exists.
If it is not a valid
extension number, the system responds with
Invalid Extension.
If one of the preceding hap-
pens, you must type in a valid extension number that is not assigned to any other voice terminal,
hunt group, terminating extension group, data module, or attendant call park extension. You can
also enter the command
add station next
which instructs the system to automatically assign the
next available extension number.
5-3