Instruction manual

CHAPTER 4. ADMINISTRATIVE TASKS-SYSTEM
Figure 4-3 is an example of a typical list history command as displayed on the terminal. The
command results are displayed in last-in first-out order. The date that translations were last
saved on tape is printed followed by information under columns as follows:
● Date: Day and month that the command was issued.
● Time: Hour and minute that the command was issued.
● Port: A 3- or 4-character identifier that shows which port or ports the user was connected
to. The identifiers and their associated meaning are:
Identifier
Port Connection
Extended Port Network (EPN) Maintenance circuit pack in expansion port network
NET
Network Control circuit pack
System Administration Terminal
Processor circuit pack
TSC
Processor circuit pack
SMDR
Processor circuit pack
● Login: The login of the user performing the data command.
● Actn: The first four letters of the action command word.
● Object: The first 12 letters of the object command word.
● Qualifier: The first 36 letters of the qualifier (or qualifiers) command word.
list history
page 1
History
Date of Translation Loaded:
19:53 Wed Jul 19, 1990
Date
Time
Port Login
Actn
Object Qualifier
----
---- ---- -----
---- ------
---------
07/18 12:34 EPN
cust2 add station 1120
07/18 12:23 EPN
cust2 chan
dialplan
07/16 09:44 SAT
craft
rele station
504
07/16 09:22 SAT
craft busy
station
504
07/15 15:25 SAT
cust
chan
station
507
07/15 15:18 SAT cust add
station
507
07/15 15:09 SAT
cust add
station
506
07/15 15:06 SAT
cust
add
station
505
07/15 15:04 SAT
cust
add
station
504
07/15 15:02 SAT
cust
add station 503
07/15 15:01 SAT
cust
add station 502
07/15 15:00 SAT
cust
add station 501
FIGURE 4-3. Typical History Form
4-14