Instruction manual
CHAPTER 4. ADMINISTRATIVE TASKS-SYSTEM
8. Enter the current year
(1990-2099)
and press [RETURN].
Note: The cursor is positioned on
Hour:.
9. Enter the current hour
(0-23)
and press [RETURN]. Table 4-A shows the standard time
conversion to 24-hour time. Enter the 24-hour time as shown. For example, if the current
time is 2:00 p.m., enter 14.
Note: The cursor is positioned on
Minute:.
10. Enter the current minute
(0-59).
11. Press [ENTER].
12. Verify that the screen displays:
The set time form is completed successfully
enter command:
Enter
save translation
and press [RETURN] so the correct time and date will be
entered in system translations. See Chapter 6 for save translation information.
13. Verify the date and time data by entering
Display Time
and pressing [RETURN].
Note: The Date and Time form is displayed showing all data entered, followed by:
enter command:
4-11